Home > Multi-Tech Systems > Communications System > Multi-Tech Systems Mvp400, Mvp800 Voice/fax Over Ip Networks User Guide

Multi-Tech Systems Mvp400, Mvp800 Voice/fax Over Ip Networks User Guide

Here you can view all the pages of manual Multi-Tech Systems Mvp400, Mvp800 Voice/fax Over Ip Networks User Guide. The Multi-Tech Systems manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 71

71 Chapter 4 - MultiVOIP Software
Download H.323 Stack
 If you have obtained a new H.323 stack, do the following:
Win3.1 users - In the Program Manager, double-click the Download H.323 Stack icon in the
MultiVOIP 400/800 program group. The Open dialog box appears displaying the file list containing a
single file, coders.hst.
Win2000/NT/98/95 users - Click Programs | MultiVOIP 800 | Download H.323 Stack. The Open
dialog box appears displaying the file list containing a single file, h323.pdl.
After you...

Page 72

72 MultiVOIP 400/800 User Guide 

Page 73

Chapter 5 - Remote Configuration and Management 

Page 74

74 MultiVOIP 400/800 User Guide
Introduction
This chapter provides procedures for viewing or changing the configuration of a remote unit.  Two
methods are provided to access a remote unit; the first method is modem based and the second
method uses IP.  Within the IP method, three applications can be used: 1) LAN-Based using TFTP
(Trivial File Transfer Protocol), 2) Telnet as a client application, or 3) a standard web browser on the
Internet.
Remote Configuration
Remote configuration requires the...

Page 75

75 Chapter 5 - Remote Configuration and Management
Verify that the Communication Type is set for COM Port and the Select Port field is set for the
COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of the
remote MultiVOIP 400/800.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different than the defaults in the dialog box, refer to your modem user documentation and change
the default values to...

Page 76

76 MultiVOIP 400/800 User Guide
LAN-Based 
The LAN-based remote configuration requires a Windows Sockets compliant TCP/IP stack. TCP/IP
protocol software must be installed and functional before the configuration program can be used.
1. You must assign an Internet (IP) address for the PC and for each node that will be managed by
the configuration program. Refer to the protocol software documentation for instructions on how
to set the IP addresses.
Once you have completed this step, you should be able to...

Page 77

77 Chapter 5 - Remote Configuration and Management
6. The MultiVOIP 800 Setup dialog box is displayed. This is the dialog box of the remote MultiVOIP
400/800. Refer to the online Help provided with your MultiVOIP 400/800 for the definition of each
dialog box and field within a dialog box.
7. After you have changed the configuration of the remote MultiVOIP 400/800, click Download
Setup to update the configuration. The remote MultiVOIP 400/800 will be brought down, the new
configuration written to the...

Page 78

78 MultiVOIP 400/800 User Guide
Remote Management
This section describes typical client applications that can be used to configure the MultiVOIP 400/800
remotely. It is important to note that although any subsequent changes to configuration can be made
using these applications, the initial setup and configuration of the MultiVOIP 400/800 must be done
on the local PC using the MultiVOIP 400/800 software provided with your unit.
Although establishing access to the MultiVOIP 400/800 varies between...

Page 79

79 Chapter 5 - Remote Configuration and Management
Voice over IP Configuration
Selecting Option 1 displays the Main menu, which allows further configuration options. These
options include Protocol Stacks (option 1), Applications (option 2), System Information (option 3), and
Voice Channels (option 4). For further descriptions of these options, refer to Chapter 4 - MultiVOIP
400/800 Software.
Phone Directory Database
Selecting Option 2 allows you to add entries to the Phone Directory Database. Refer to...

Page 80

80 MultiVOIP 400/800 User Guide
WEB Management
The MultiVOIP 400/800 can be accessed, via a standard Web browser, from anywhere on the
connected Internet. In order to provide this support, the WEB Server option has to be enabled from
the Others button in the Main menu which displays the Applications Setup dialog box (see Chapter
4 - MultiVOIP 400/800 Software).
Once enabled, users can access the MultiVOIP 400/800 by entering its IP address in the Address
field of their web browser. The following screen...
Start reading Multi-Tech Systems Mvp400, Mvp800 Voice/fax Over Ip Networks User Guide

Related Manuals for Multi-Tech Systems Mvp400, Mvp800 Voice/fax Over Ip Networks User Guide

All Multi-Tech Systems manuals