MSI Router RG60G User Manual

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  55   
4.6.4 SNMP Setting 
 
 
 
In short, SNMP, the Simple Network Management Protocol, is a protocol designed to give users the 
capability to remotely manage a computer network by polling and setting terminal values and monitoring 
network events.  
＊  Enable SNMP 
You must check either  Local or Remote  or  both  to enable SNMP function. If  Local is checked, this device 
will response request from LAN, while this device...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  56   
 
Chapter 5 Configuring Turbo Mode 
With Client 
  5.1 Setup 
 
5.1.1 Plug in your Turbo G WLAN Client Device (ex. PCI Card, USB Stick, Cardbus
…etc) and follow 
on-screen setup steps to finish MSI Wireless Network Card Setup driver installation.   
 
5.1.2  Choose  MSI Configuration Tool  for MSI Utility configuration. 
   
 
  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  57   
5.1.3  Select  Optimize for performance mode.   
   
 
5.1.4  Wait a few seconds until Setup has finished installing.   
  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  58   
5.2 Configuration 
To connect MSI Turbo G Router, configure the settings as below: 
 
 
    

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  59
 
  5.3 Confirmation  
You may find out whether you
’re in Turbo Mode by checking the following default value. 
    
   
  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  60    
Appendix A TCP/IP Configuration 
for Windows 95/98  T
his  section introduces you how to install TCP/IP protocol into your personal computer. And we 
supposed that you have been successfully installed one network card on your personal computer. If not, 
please refer to your network card manual. Moreover, the Section B.2 tells you how to set TCP/IP values for 
working with this NAT Router correctly.  A.1 Install TCP/IP...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  61   
e. Select  Microsoft item in the manufactures list. And choose  TCP/IP in the Network Protocols. Click 
OK  button to return to Network window. 
   
 
f. The TCP/IP protocol shall be listed in the Network window. Click  OK to complete the install procedure 
and restart your PC to enable the TCP/IP protocol. 
  A.2 Set TCP/IP Protocol for Working with NAT Router 
a. Click
 Start  button and choose  Settings, then click...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  62    
 
 
c. Click  Properties  button to set the TCP/IP protocol for this NAT Router. 
d. Now, you have two setting methods:  d.1 Check  Obtain an IP address automatically  in the IP Address tab. 
   
 
  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  63   
d.2  Do not  enter any value under the Gateway tab.   
d.3 Choose  Disable DNS  in the DNS Configuration tab.    

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  64    
B.1 Configure IP manually 
a.  Select  Specify an IP address  in the IP Address tab. The default IP address of this product is 
192.168.1.254. So please use 192.168.1.xxx (xxx is between 1 and 253) for IP Address field and 
255.255.255.0 for Subnet Mask field.