MSI Router RG60G User Manual

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  25   
4.3.4 Dynamic DNS 
To host your server on a changing IP address, you have to use dynamic domain name service (DDNS).  
In this case when someone needs to reach your host, all he needs to know is the name. Dynamic DNS will 
map the name of your host to your current IP address, which may change each time you connect to your 
Internet service provider.  
Before activating 
Dynamic DNS, you need to register an account on one...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  26   
 
 
4.3.5 DHCP Server 
Click  “More>> ” 
The settings of a TCP/IP environment include host IP, Subnet Mask, Gateway, and DNS configurations. It 
is not easy to manually configure all the computers and devices in your network. Fortunately, DHCP Server 
provides a rather simple step to handle all these settings. This product supports the function of DHCP 
server. If you enable this product ’s DHCP server and configure your...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  27   
1.  DHCP Server : Choose “Disable ” or  “Enable. ” 
2.  Lease Time:  Define the period of time for the IP address leased.  
3.  IP pool starting Address/ IP pool starting Address : Whenever there is a request, the DHCP 
server will automatically allocate an unused IP address from the IP address pool to the 
requesting computer. You must specify the starting and ending address of the IP address pool. 
4.  Domain Name :...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  28   
4.4.1 Basic Setting 
 
 
 
Discard PING from WAN side 
When this feature is enabled, any host on the WAN cannot ping this product.  
SPI Mode 
When this feature is enabled, the router will record the packet information pass through the router like IP 
address, port address, ACK, SEQ number and so on. And the router will check every incoming packet to 
detect if this packet is valid.  
DoS Attack Detection 
When this...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  29   
4.4.2 MAC Address Control 
 
 
 
MAC Address Control  allows you to assign different access right for different users and to assign a specific 
IP address to a certain MAC address. 
MAC Address Control  Check “Enable ” to enable the  “MAC Address Control ”. All of the settings 
in this page will take effect only when  “Enable ” is checked. 
Connection control  Check Connection control to enable the controlling of which...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  30    
Control table 
 
Control table  is the table at the bottom of the  MAC Address Control 
page. Each row of this table indicates the MAC address and the expected 
IP address mapping of a client. There are four columns in this table: 
 
 
MAC Address  MAC address indicates a specific client.  IP Address  Expected IP address of the corresponding 
client. Keep it empty if you dont care its IP 
address. 
C 
When Connection...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  31   
Previous page and Next Page
 To make this setup page simple and clear, we have divided the  “Control 
table ” into several pages. You can use these buttons to navigate to 
different pages. 
4.4.3 Packet Filtering 
   
 
Packet Filter  enables you to control what packets are allowed to pass the router. Outbound filter applies 
on all outbound packets. However, Inbound filter applies on packets that destined to Virtual...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  32   
For source or destination IP address, you can define a single IP address (4.3.2.1) or a range of IP 
addresses (4.3.2.1-4.3.2.254). An empty implies all IP addresses.  
For source or destination port, you can define a single port (80) or a range of ports (1000-1999). Add prefix 
T or U to specify TCP or UDP protocol, for example, T80, U53, U2000-2999. No prefix indicates both 
TCP and UDP are defined. An empty implies all...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  33   
Example 2: 
 
 
 
(1.2.3.100-1.2.3.119) They can do everything except read net news (port 119) and transfer files via FTP 
(port 21) 
Others are all allowed. 
 
After  Inbound Packet Filter  setting is configured, click the  save button. 
 
＊  Outbound Filter:  
To enable  Outbound Packet Filter  click the check box next to  Enable in the Outbound Packet Filter  
field.  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  34   
Example 1: 
 
 
(192.168.1.100-192.168.1.149)  They are allowed to send mail (port 25), receive mail (port 110), and 
browse Internet (port 80); port 53 (DNS) is necessary to resolve the domain name. 
 
(192.168.1.10-192.168.1.20)  They can do everything (block nothing) Others are all blocked. 
 
Example 2: