MSI Router RG60G User Manual

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  5  
Chapter 2 Hardware Installation 
  2.1 Panel Layout 
 
2.1.1 Front Panel  
   
     Figure 2-1 Front Panel 
  LED  Function   Color  Status  Description 
POWER   Power 
indication  Green 
On  Power is being applied to this product.  Status 
System status   Green 
Blinking  M1 is flashed once per second to indicate system is alive.  On 
The WAN port is linked. WAN 
WAN port 
activity  Green 
Blinking  The WAN port is sending...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  6   
2.1.2 Rear Panel 
   
Figure 2-2 Rear Panel 
 
  Port  Description 
Power  Power inlet 
WAN Port  T he port where you will connect your cable (or DSL) modem or Ethernet 
router. 
LAN Port 1-4  The port s where you will connect networked computers and other 
devices. 
 
  Antenna 
Power  LAN Ports 1~4 
WAN Port  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  7 
 
  2.2 Procedure for Hardware Installation 
 
1.  Decide where to place your Wireless Broadband Router  
You can place your Wireless Broadband Router on a desk or other flat surface, or you can mount it on 
a wall. For optimal performance, place your Wireless Broadband Router in the center of your office (or 
your home) in a location that is away from any potential source of interference, such as a metal wall or 
microwave...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  8   
Chapter 3 Network Settings and                
Software Installation 
T
o  use this product correctly, you have to properly configure the network settings of your computers and 
install the attached setup program into your MS Windows platform. 
  3.1 Make Correct Network Settings of Your Computer 
 
The default IP address of this product is 192.168.1.254, and the default subnet mask is 255.255.255.0. 
These addresses can...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  9 
 
There must be something wrong in your installation procedure. You have to check the following items in 
sequence: 
1. Is the Ethernet cable correctly connected between this product and your computer?  Tip: The LAN LED of this product and the link LED of network card on your computer must be lighted. 
2. Is the TCP/IP environment of your computers properly configured?  Tip: If the IP address of this product is...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  10    
 
Chapter 4 Configuring Wireless 
Broadband Router  T
his  product provides Web based configuration scheme, which is configuring by your Web browser, 
such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, 
Macintosh or UNIX based platforms. 
 
   
 
 
 
 
 
 
 
  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  11   
4.1 Start-up and Log in 
 
 
 
Activate your browser, and  disable the proxy or add the IP address of this product into the exceptions . 
Then, type this product ’s IP address in the Location (for Netscape) or Address (for IE) field and press 
ENTER. For example:  http://192.168.1.254 . 
After the connection is established, you will see the web user interface of this product. To log in as an 
administrator, enter the...

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  12    
Setup Wizard will guide you through a basic configuration procedure step by step.  Press  ”Next ”. 
   
 
Setup Wizard - Select WAN Type : For detail settings, please refer to  4.3.1 IP Setting. 
 
  4.3 Setup 
 
  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  13   
4.3.1 IP Setting  – WAN Type, IP Mode 
   
 
Press  “Change ” 
   
 
This option is primary to enable this product to work properly. The setting items and the web appearance 
depend on the WAN type. Choose correct WAN type before you start. 
 
  

   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  14  1. 
LAN IP Address :  the local IP address of this device. The computers on your network must use the 
LAN IP address of your product as their Default Gateway. You can change it if necessary.  
2.  WAN Type : WAN connection type of your ISP. You can click  Change button to choose a correct one 
from the following four options: 
A. Static IP Address: ISP assigns you a static IP address. 
B. Dynamic IP Address: Obtain an IP...