MSI Router RG60G User Manual
Have a look at the manual MSI Router RG60G User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 62 MSI manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MSI RG60G Turbo 802.11b/g 4 Port Wireless Broadband Router 55 4.6.4 SNMP Setting In short, SNMP, the Simple Network Management Protocol, is a protocol designed to give users the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events. ＊ Enable SNMP You must check either Local or Remote or both to enable SNMP function. If Local is checked, this device will response request from LAN, while this device will response request from WAN if Remote is checked,. ＊ Get Community Setting the community of GetRequest your device will response. ＊ Set Community Setting the community of SetRequest your device will accept.
MSI RG60G Turbo 802.11b/g 4 Port Wireless Broadband Router 56 Chapter 5 Configuring Turbo Mode With Client 5.1 Setup 5.1.1 Plug in your Turbo G WLAN Client Device (ex. PCI Card, USB Stick, Cardbus …etc) and follow on-screen setup steps to finish MSI Wireless Network Card Setup driver installation. 5.1.2 Choose MSI Configuration Tool for MSI Utility configuration.
MSI RG60G Turbo 802.11b/g 4 Port Wireless Broadband Router 57 5.1.3 Select Optimize for performance mode. 5.1.4 Wait a few seconds until Setup has finished installing.
MSI RG60G
Turbo 802.11b/g 4 Port Wireless Broadband Router
58
5.2 Configuration
To connect MSI Turbo G Router, configure the settings as below:
MSI RG60G
Turbo 802.11b/g 4 Port Wireless Broadband Router
59
5.3 Confirmation
You may find out whether you
’re in Turbo Mode by checking the following default value.
MSI RG60G
Turbo 802.11b/g 4 Port Wireless Broadband Router
60
Appendix A TCP/IP Configuration
for Windows 95/98 T
his section introduces you how to install TCP/IP protocol into your personal computer. And we
supposed that you have been successfully installed one network card on your personal computer. If not,
please refer to your network card manual. Moreover, the Section B.2 tells you how to set TCP/IP values for
working with this NAT Router correctly. A.1 Install TCP/IP Protocol into Your PC
a. Click
Start button and choose Settings, then click Control Panel .
b. Double click Network icon and select Configuration tab in the Network window.
c. Click Add button to add network component into your PC.
d. Double click Protocol to add TCP/IP protocol.
MSI RG60G Turbo 802.11b/g 4 Port Wireless Broadband Router 61 e. Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window. f. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install procedure and restart your PC to enable the TCP/IP protocol. A.2 Set TCP/IP Protocol for Working with NAT Router a. Click Start button and choose Settings, then click Control Panel . b. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window.
MSI RG60G Turbo 802.11b/g 4 Port Wireless Broadband Router 62 c. Click Properties button to set the TCP/IP protocol for this NAT Router. d. Now, you have two setting methods: d.1 Check Obtain an IP address automatically in the IP Address tab.
MSI RG60G Turbo 802.11b/g 4 Port Wireless Broadband Router 63 d.2 Do not enter any value under the Gateway tab. d.3 Choose Disable DNS in the DNS Configuration tab.
MSI RG60G Turbo 802.11b/g 4 Port Wireless Broadband Router 64 B.1 Configure IP manually a. Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.168.1.254. So please use 192.168.1.xxx (xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field.