MSI Router RG60G User Manual

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  45   
4.4.9 DMZ 
 
 
 
＊  IP Address of DMZ Host 
DMZ (DeMilitarized Zone) Host is a host without the protection of firewall. It allows a computer to be 
exposed to unrestricted 2-way communication for Internet games, Video conferencing, Internet telephony 
and other special applications.  
NOTE: This feature shall be used only when necessary.  
＊  Non-standard FTP port 
You have to configure this item if you want to access an FTP server of which port number is not 21. This 
setting will be lost after rebooting.  
 
 
 
 
 
 
 
  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  46   
4.4.10 Special AP 
 
 
 
Some applications might require multiple connections, like Internet games, Video conferencing, Internet 
telephony, etc. Because of the firewall function, these applications cannot work with a pure NAT router. The 
Special Applications  feature allows some of these applications to work with this product. If the 
mechanism of Special Applications fails to make an application work, try setting your computer as the  DMZ 
host instead. 
1.  Trigger : the outbound port number issued by the application. 
2.  Incoming Ports : when the trigger packet is detected, the inbound packets sent to the specified port 
numbers are allowed to pass through the firewall. 
This product provides some predefined settings Select your application and click  “Copy  to ” to add the 
predefined setting to your list. 
NOTE: At any given time, only one PC can use each Special Application tunnel. 
 
 
 
 
 
 
  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  47   
4.5 Administration 
 
 
 
4.5.1 Change Password 
   
 
You can change password here. Changing the system password for security reason is  highly 
recommended.  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  48   
4.5.2 Firmware Upgrade 
 
 
 
You can upgrade firmware by clicking  Firmware Upgrade button. 
 
4.5.3 Backup Setting 
   
 
 
You can backup your settings by clicking the  Backup Setting button and save it as a bin file. Once you 
want to restore these settings, please click  Firmware Upgrade button and use the bin file saved.  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  49   
4.5.4 Reset to factory default 
 
 
You can also reset this product to factory default by clicking the  Reset to default button. 
 
4.5.5 Reboot 
   
You can also reboot this product by clicking the  Reboot button. 
 
4.5.6 System Time 
   
  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  50  ＊
 Get Date and Time by NTP Protocol 
Select if you want to Get Date and Time by NTP Protocol.  
＊  Time Server 
Select a NTP time server to consult UTC time  
＊  Time Zone 
Select a time zone where this device locates.  
＊  Set Date and Time manually 
Select if you want to Set Date and Time manually.  
＊  Function of Buttons 
＊  Sync Now:  Synchronize system time with network time server.  
＊  Daylight Saving:  Set up where the location is.  
 
4.5.7 Remote Access 
   
 
＊  Remote Administrator Host/Port 
In general, only Intranet user can browse the built-in web pages to perform administration task. This feature 
enables you to perform administration task from remote host. When enabled, only the specified IP address 
can perform remote administration. If the specified IP address is 0.0.0.0, any host can connect to this 
product to perform administration task. You can use subnet mask bits /nn notation to specified a group of 
trusted IP addresses. For example, 10.1.2.0/24.  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  51   
NOTE: When Remote Administration is enabled, the web server port will be shifted to 88. You can also 
change web server port to other port. 
＊
 Administrator Time-out 
The time of no activity will logout automatically. Set it to zero to disable this feature. 
 
4.5.8 Network wake-up 
   
 
＊  MAC Address for Wake-on-LAN 
Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order to enjoy 
this feature, the target device must be Wake-on-LAN enabled and you have to know the MAC address of 
this device, say 00-11-22-33-44-55. Clicking  Wake up button will make the router to send the wake-up 
frame to the target device immediately.  
 
 
  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  52   
4.5.9 Diagnostic 
 
 
 
This is the graphic interface of  “Ping ” command; you can enter the Domain Name or IP address to ping if it 
is working. 
  4.6 Status 
 
  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  53   
4.6.1 System Status 
   
 
This item shows the static data of the router. 
 
4.6.2 System Log 
   
 
You can View system log by clicking the  View Log button  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  54   
4.6.3 Log Notification 
 
This page supports two methods to export system logs to specific destination by means of syslog (UDP) 
and SMTP (TCP). The items you need to setup including:  
＊  IP Address for Syslog 
Host IP of destination where syslogs will be sent to. 
Check  Enable  to enable this function.  
＊  E-mail Alert Enable 
Check if you want to enable Email alert (send syslog via email).  
＊  SMTP Server IP and Port 
Input the SMTP server IP and port, which are concated with  :. If you do not specify port number, the 
default value is 25. 
For example, mail.your_url.com or 192.168.1.100:26.  
＊  Send E-mail alert to 
The recipients will receive these logs. You can assign more than 1 recipient, using   ;  or   ,   to separate 
email addresses.