MSI Router RG60G User Manual

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  65   
b.  In the Gateway tab, add the IP address of this product (default IP is 192.168.1.254) in the New  gateway field and click  Add button.   
 
c. In the DNS Configuration tab, enter the DNS values which are provided by the ISP into  DNS 
Server Search Order  field and click Add  button.                
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  66                                              
 
Appendix B  802.1x Setting 
   
Figure 1: Testing Environment (Use Windows 2000 Radius Server)  B.1 Equipment Details 
PC1:  
Microsoft Windows XP Professional without Service Pack 1. 
D-Link DWL-650+ wireless LAN adapter 
Driver version: 3.0.5.0 (Driver date: 03.05.2003) 
PC2:   Microsoft Windows XP Professional with Service Pack 1a. 
Z-Com XI-725 wireless LAN USB adapter 
Driver version: 1.7.29.0 (Driver date: 10.20.2001) 
Authentication Server :  
Windows 2000 RADIUS server with Service Pack 3 and HotFix Q313664.  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  67   
  NOTE: Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3  and HotFix Q313664  (You can get more information from  
http://support.microsoft.com/default.aspx?scid=kb;  en-us;313664 ) 
  B.2 DUT
  
Configuration: 
1.Enable DHCP server. 
2.WAN setting: static IP address. 
3.LAN IP address: 192.168.1.254/24. 
4.Set RADIUS server IP. 
5.Set RADIUS server shared key. 
6.Configure WEP key and 802.1X setting. 
  The following tests will use the inbuilt 802.1X authentication method such as EAP_TLS, 
PEAP_CHAPv2 (Windows XP with SP1 only), and PEAP_TLS(Windows XP with SP1 only) using the 
Smart Card or other Certificate of the Windows XP Professional. 
  B.3 DUT and Windows 2000 Radius Server Setup 
a.  Setup Windows 2000 RADIUS Server 
 We have to change authentication method to MD5_Challenge or using smart  
 card or other certificate on RADIUS server according to the test condition. 
b.  Setup DUT  1. Enable the 802.1X (check the  “Enable checkbox “). 
2. Enter the RADIUS server IP. 
3. Enter the shared key. (The key shared by the RADIUS server and DUT). 
4. We will change 802.1X encryption key length to fit the variable test  
 condition.  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  68    
c.  Setup Network adapter on PC  Choose the IEEE802.1X as the authentication method. (Fig 2) 
 NOTE: 
 Figure 2 is a setting picture of Windows XP without service pack 1. If users upgrade  to service pack 1, then they can ’t see MD5-Challenge from EAP type list any more, 
but they will get a new Protected EAP (PEAP) option. 
d. Choose MD5-Challenge or Smart Card or other Certificate as the EAP type.  
d.1. If choosing use smart card or other Certificate as the EAP type, we select to  
 use a certificate on this computer. (Fig 3) 
d.2. We will change EAP type to fit the variable test condition.   
Figure 2: Enable IEEE 802.1X access control  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  69   
 
Figure 3: Smart card or other Certificate Properties 
 
 B.4 Windows 2000 RADIUS server Authentication testing: 
a. DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) 
a.1 Download and install the certificate on PC1. (Fig 4) 
a.2 PC1 choose the SSID of DUT as the Access Point. 
a.3 Set authentication type of wireless client and RADIUS server both to EAP_TLS. 
a.4 Disable the wireless connection and enable again. 
a.5 The DUT will send the users certificate to the RADIUS server, and then send the  message of authentication result to PC1. (Fig 5) 
a.6 Windows XP will prompt that the authentication process successful or not, and will         end the authentication procedure. (Fig 6) 
a.7 Terminate the test steps when PC1 get dynamic IP and PING remote host work. 
 
 
  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  70    
 
 
Figure 4: Certificate information on PC1 
   
Figure 5: Authenticating     
Figure 6: Authentication success  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  71   
b. DUT authenticate PC2 using PEAP-TLS. 
b.1 PC2 choose the SSID of DUT as the Access Point. 
b.2 Set authentication type of wireless client and RADIUS server both to PEAP_TLS. 
b.3 Disable the wireless connection and enable it again. 
b.4 The DUT will send the users certificate to the RADIUS server, and then 
  send the message of authentication result to PC2. 
b.5 Windows XP will prompt that the authentication process is successful or not  
  and will end the authentication procedure. 
b.6 Terminate the test steps when PC2 get dynamic IP and PING remote host work. 
  Support Type: The router supports the types of 802.1x Authentication: 
PEAP-CHAPv2 and PEAP-TLS. 
 
NOTE:  1.PC1 is on Windows XP platform without Service Pack 1. 
2.PC2 is on Windows XP platform with Service Pack 1a. 
3.PEAP is supported on Windows XP with Service Pack 1 only. 
4.Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption function is enabled.  
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  72    
 
Appendix C WPA-PSK and WPA 
   
 
Wireless Router:  LAN IP: 192.168.1.254 
                WAN IP: 192.168.122.216 
Radius Server:  192.168.122.1 
UserA :    XP Wireless Card:Ti-11g 
Tool:    Odyssey Client Manager 
Refer to:   www.funk.com   
Download:   http://www.funk.com/News&Events/ody_c_wpa_preview_pn.asp  
    
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  73   
Or Another Configuration:
 
    
WPA-PSK 
 
In fact, it is not necessary for this function to be authenticated by Radius Server, the client and wireless 
Router could be authenticated by themselves. 
 
Method1:
 
1. Go to the Web manager of Wireless Router to configure, as illustrated below: 
     
						

							
   
   
MSI RG60G

 
Turbo 802.11b/g 4 Port Wireless Broadband Router

 
 
  74   
2. Go to Odyssey Client Manager, first choose
 “ Network ” 
 You should verify if the software can show the wireless card beforehand. 
 Open  “ Adapters ”   
   
 
3. Add and edit following settings: