MSI Hetis 865gv-e Manual

Chapter 2
2-4 Install at least one DIMM module into the slots.  Memory modules can
be installed into the slots in any order.  You can install either single or double-
sided modules to meet your need.
S (Single Side): 64MB ~ 512MB             D (Double Side): 128MB ~ 1GB Combination Slot 
1 2 DDR 1 S/D S/D DDR 2 S/D S/D Total Memory 64MB~2GB 64MB~2GB  DDR  Module Combination DDR Population Rules
Install at least one DIMM module on the slots. Each DIMM slot supports
up to a maximum size of 1GB. Users can...

Introducing Mainboard
2-5 1.The DDR DIMM has only one notch on the center of module.  The module
will only fit in the right orientation.
2.Insert the DIMM memory module vertically into the DIMM slot. Then
push it in.
 3.The plastic clip at each side of the DIMM slot will automatically close.VoltnotchInstalling  DDR Modules 

Chapter 2
2-6 ATX 20-Pin Power Connector: ATX1
This connector allows you to connect to an ATX power supply. To
connect to the ATX power supply, make sure the plug of the power supply is
inserted in the proper orientation and the pins are aligned. Then push down the
power supply firmly into the connector. The power connector supports instant
power on function which means that system will boot up immediately when the
power supply connector is inserted on the board.
ATX 12V Power Connector: JPW1
This 12V...

Introducing Mainboard
2-7 2.5 Front Panel
Audio Ports
These audio ports allow you to connect the front audio device.SPDIF-Out Jack
The connector allows you to connect to Sony & Philips Digital Inter-
face (SPDIF), developed jointly by the Sony and Philips corporations .  A
standard audio file transfer format, SPDIF allows the transfer of digital audio
signals from one device to another without having to be converted first to an
analog format.Mini IEEE 1394 Port:
J1394-2USB Ports Audio Ports
Optical...

Chapter 2
2-8 USB Ports
The mainboard provides a UHCI (Universal Host Controller Interface)
Universal Serial Bus root for attaching USB devices such as keyboard, mouse
or other USB-compatible devices.  You can plug the USB devices directly into
these connectors.  The mainboard supports USB 1.1 & 2.0 devices.Mini IEEE 1394 Port: J1394-2
The mainboard provides one mini IEEE 1394 port.  It is designed for you
to connect the IEEE 1394 device with external power.  The IEEE 1394 high-
speed serial bus...

Introducing Mainboard
2-9 The Rear Panel provides the following connectors:Mouse/Keyboard  Connectors
The mainboard provides two standard PS/2®
 mini DIN connectors for
attaching PS/2®
 mouse and keyboard. 2.6 Rear Panel
PS/2 Keyboard (6-pin Female)2
13
45 6
1
23
45 6 PS/2 Mouse (6-pin Female)MIC -in Line-in Line-out
TV1 DVI Port
VGA Port USB Ports Keyboard J1394-1COM
Parallel Port
LAN Jack
MousePINSIGNALDESCRIPTION
1Mouse DATAMouse DATA
2NCNo connection
3GNDGround
4VCC+5V
5Mouse ClockMouse clock
6NCNo...

Chapter 2
2-10TV1
ConnectorTV
ProjectorThe mainboard supports 4- or 6- channel audio function.  For more
information, refer to Appendix. Audio Ports
Line Out is a connector for Speakers or Headphones.  Line In is used for
external CD player, Tape player, or other audio devices.  MIC is a connector for
stereo microphones.
Composite Connector: TV1
You can connect a TV or video device to TV1 connector for video-out
function which allows you to output the image to a TV or video device.1/8” Stereo Audio...

Introducing Mainboard
2-11 RJ-45 LAN Jack
The mainboard provides one standard RJ-45 jack for connection to
Local Area Network (LAN).  You can connect a network cable to the LAN jack.
This Giga-bit LAN enables data to be transferred at 1000, 100 or 10Mbps.
USB  Ports
The mainboard provides a UHCI (Universal Host Controller Interface)
Universal Serial Bus root for attaching USB devices such as keyboard, mouse
or other USB-compatible devices.  You can plug the USB device directly into
the connector.  The...

Chapter 2
2-12131
14 25
PINSIGNALDESCRIPTION
1STROBEStrobe
2DATA0Data0
3DATA1Data1
4DATA2Data2
5DATA3Data3
6DATA4Data4
7DATA5Data5
8DATA6Data6
9DATA7Data7
10ACK#Acknowledge
11BUSYBusy
12PEPaper End
13SELECTSelect
14AUTO FEED#Automatic Feed
15ERR#Error
16INIT#Initialize Printer
17SLIN#Select In
18GNDGround
19GNDGround
20GNDGround
21GNDGround
22GNDGround
23GNDGround
24GNDGround
25GNDGround Pin DefinitionParallel Port
The mainboard provides a 25-pin female centronic connector as LPT.  A
parallel port is a...

Introducing Mainboard
2-13 Pin
1
2
3
4
5
6
7
8
9
10
11
12DVI-I Connector
Signal Assignment
T.M.D.S.* Data2-
T.M.D.S. Data2+
T.M.D.S. Data2/4 Shield
T.M.D.S. Data4-
T.M.D.S. Data4+
DDC Clock
DDC Data
N/C
T.M.D.S. Data1-
T.M.D.S. Data1+
T.M.D.S. Data1/3 Shield
T.M.D.S. Data3-Pin
13
14
15
16
17
18
19
20
21
22
23
24Signal Assignment
T.M.D.S. Data3+
+5V
GND (for +5V)
Hot Plug Detect
T.M.D.S. Data0-
T.M.D.S. Data0+
T.M.D.S. Data0/5 Shield
T.M.D.S. Data5-
T.M.D.S. Data5+
T.M.D.S. Clock Shield
T.M.D.S. Clock+...