MSI Hetis 865gv-e Manual

             Getting Started
1-3 † Rear I/O
- PS/2 keyboard/Mouse x 1
- Serial Ports x 2
- Parallel Port x 1
- VGA Port x 1
- DVI connector for LCD monitor x 1 (optional)
- TV-Out Connector x 1 (optional)
- S-Video Connector x 1 (optional)
- Audio Ports (Line-In x 1, Line-Out x 1, Mic-In x 1)
- USB2.0 Ports x 2
- RJ45 LAN Jack x 1
- IEEE1394 (6 pins) x 1 (optional)
† Internal I/O
- IDE (2x20)  x 1
- CD Audio Input (1x4) x 1
- Internal Speaker Header x 1
- I2
C Connector x 1
- Internal USB Connector...

Chapter 1
1-4Front View
1.  Power Switch6.  4-pin IEEE 1394 Port (optional)
2.  Power LED7.  4 x USB 2.0 Ports
3.  HDD LED8.  Mic-in (pink), Line-out (green)
4.  Optical Drive (optional)9.  SPDIF-out
5.  Card Reader (optional)1.2 System Configuration 

             Getting Started
1-5 Rear View
1.  Mic-in10.  Power Jack
2.  Line-in11.  S-Video out (optional)
3.  Line-out12.  Serial Ports
4.  AV-out (optional)13.  Parallel Port
5.  DVI Port(optional)14.  PCI Slots
6.  VGA Port15.  RJ-45 LAN Jack
7.  2 x USB 2.0 Ports16.  PS/2 Mouse
8.  PS/2 Keyboard17.  Voltage Selector (115/230V)
9.  6-pin IEEE 1394 Port (optional)18.  Ventilation Hole 

Chapter 1
1-6 Chassis Design
† Dimension: 309mm (H) x 85mm (W) x 325mm (D)
† Minimized screw structure
† Detachable bay housing
† Multiple ventilation holes
1.  CPU Fan Ventilation Hole5.  System Ventilation Holes
2.  CPU Fan Ventilation Hole6.  Power Supply Ventilation Hole
3.  System Fan Ventilation Hole7.  Front I/O Release Button
4.  Built-in Speaker 

             Getting Started
1-7 1.3 Thermal Solution
To prevent the system from overheating, we have adopted a specially
designed CPU cooler and multiple ventilation holes for better cooling effects.
The specially designed CPU cooler supports Intel Northwood FSB 800 CPU up
to 3.0GHz and Prescott up to 3.4GHz and above.  The following figures illustrate
how the system fan effectively exhausts hot air through multiple ventilation
holes.CPU Fan
Air Flow Direction
CPU FanAir In
Air Out 

Chapter 1
1-8Power SupplyPower
Supply FanVentilation
HoleSystem FanVentilation HoleVentilation
HoleCPU FanVentilation Holefront panel 

             Getting Started
1-9 System Air Flow Direction
After the installation is completed, please keep
other objects away from the ventilation hole at
least 2.5cm and above.  Do not block the ventila-
tion hole. 
 
 System Fan
CPU CoolerPower SupplyPower
Supply
Fanfront panel
 
  

2
This chapter tells you basics of the CPU, memory modules, and
expansion cards, as well as how to setup the jumpers on the mainboard.
Also, it provides the instructions on connecting the peripheal devices,
such as the mouse, keyboard, etc.
While doing the installation, be careful in holding the compo-
nents and follow the installation procedures. Introducing Mainboard 

Chapter 2
2-2 2.1 Mainboard Layout
MS-7065 (V1.X) MainboardBATT+
JBAT1J3
COM2
ATX
Power SupplyBIOS
PCI Slot 1
JCD1
smsc
LPC47M997-NR
RTL8110SVIAVT6307
Codec
IDE1
SATA2SATA1
JPW1
CPUFAN1
SYS_FAN1
JFP1
Top : mouse 
Bottom: keyboard
Top: LAN Jack
Bottom: USB ports 
J1394-2
Intel
865GV
chipsetICH 5
1394 port
Top : Parallel Port
Bottom: 
VGADVI-I connector
(optional)
TV1TOP:COM1Bottom:
green:Line-out
blue:Line-in
pink:Mic-in1394 port 
pink: MIC-in
green:Line-Out
USB ports
USB ports
SPDIF
DDR1DDR2
CON1
JTV1 

Introducing Mainboard
2-3 The mainboard supports Intel®
 PentiumTM 
4 Northwood/Prescott
processors.  The mainboard uses a CPU socket called Socket 478 for easy CPU
installation. When you are installing the CPU, make sure the CPU has a heat
sink and a cooling fan attached on the top to prevent overheating.
(For the latest information about CPU, please visit http://www.msi.com.tw/
program/products/mainboard/mbd/pro_mbd_cpu_support.php) 2.2 CPUNote:
1. Read the instructions on the cooler before you start...