Home > MSI > Motherboard > MSI 865pe Neo2 V Manual

MSI 865pe Neo2 V Manual

Here you can view all the pages of manual MSI 865pe Neo2 V Manual. The MSI manuals for Motherboard are available online for free. You can easily download all the documents as PDF.

Page 61

3-6
MS-6728 ATX Mainboard
Standard CMOS Features
The items inside STANDARD CMOS SETUP menu are divided into 9
categories.  Each category includes none, one or more setup items.  Use the
arrow keys to highlight the item you want to modify and use the  or
 keys to switch to the value you prefer.
System Time
This allows you to set the system time that you want (usually the current
time).  The time format is   .
System Date
This allows you to set the system to the date that you want (usually the current...

Page 62

3-7
BIOS Setup
Current Language
This allows you to switch the language of
BIOS. Setting options: English, China
(Simplified Chinese), Chinese (Traditional
Chinese), Japanese, Korea,.
Primary/Secondary/Third/Fourth IDE
Master/Slave
Press PgUp/ or PgDn/ to select the hard
disk drive type. The specification of hard disk
drive will show up on the right hand according
to your selection.
Type Select how to define the HDD parameters
Cylinders Enter cylinder number
Heads Enter head number
Write Precompensation...

Page 63

3-8
MS-6728 ATX Mainboard
Advanced BIOS Features
Quick Boot
Setting the item to Enabled allows the system to boot within 5 seconds since
it will skip some check items.  Available options: Enabled, Disabled.
Boot Device Select
Press  to enter the sub-menu screen.
Boot Device Priority: 1st/2nd/3rd
The items allow you to set the sequence of boot devices where AMIBIOS
attempts to load the operating system.  The settings are:
IDE-0The system will boot from the first HDD.
IDE-1The system will boot from the...

Page 64

3-9
BIOS Setup
ARMD-HDDThe system will boot from ARMD device, such as MO
or ZIP drive, that functions as hard disk drive.
CD/DVDThe system will boot from the  CD-ROM/DVD-ROM.
Legacy SCSIThe system will boot from the SCSI.
Legacy NETWORK
 The system will boot from the Network drive.
BBS-0The system will boot from the first BBS (BIOS Boot
Specification) compliant device.
BBS-1The system will boot from the second BBS (BIOS Boot
Specification) compliant device.
BBS-2The system will boot from the third BBS...

Page 65

3-10
MS-6728 ATX Mainboard
Try Other Boot Device
Setting the option to Yes allows the system to try to boot from other
devices if the system fails to boot from the 1st/2nd/3rd boot device.
Full Screen LOGO Show
This item enables you to show the company logo on the bootup screen.  Settings
are:
Enabled          Shows a still image (logo) on the full screen at boot.
DisabledShows the POST messages at boot.
S.M.A.R.T. for Hard Disks
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis &...

Page 66

3-11
BIOS Setup
OptionDescription
SetupThe password prompt appears only when end users try to
run Setup.
Always A password prompt appears every time when the com-
puter is powered on or when end users try to run Setup.
Password Check
This specifies the type of AMIBIOS password protection that is implemented.
Setting options are described below.
Boot To OS/2
This allows you to run the OS/2
® operating system with DRAM larger than
64MB.  When you choose No, you cannot run  the OS/2® operating system
with...

Page 67

3-12
MS-6728 ATX Mainboard
Option Description
Disabled The specified ROM is not copied to RAM.
Enabled The contents of specified ROM are copied to RAM
for faster system performance.
Cached The contents of specified ROM are not only copied
to RAM, the contents of the ROM area can be writ-
ten to and read from cache memory.
APIC ACPI SCI IRQ
This field is used to enable or disable the APIC (Advanced Programmable
Interrupt Controller).  Due to compliance to PC2001 design guide, the system is
able to run in...

Page 68

3-13
BIOS Setup
Advanced Chipset Features
DRAM  Timing Setting...
Press  and to enter the sub-menu screen.
Configure SDRAM Timing by SPD
Selects whether DRAM timing is controlled by the SPD (Serial Presence
Detect) EEPROM on the DRAM module.  Setting to Enabled enables the
following fields automatically to be determined by BIOS based on the
configurations on the SPD.  Selecting Disabled allows users to configure
these fields manually.
MSI Reminds You...
Change these settings only if you are familiar with...

Page 69

3-14
MS-6728 ATX Mainboard
CAS# Latency
This controls the timing delay (in clock cycles) before SDRAM starts
a read command after receiving it.  Settings: 2, 2.5 (clocks).  2 (clocks)
increases the system performance the most while 2.5 (clocks) provides
the most stable performance.
RAS# Precharge
This item controls the number of cycles for Row Address Strobe
(RAS) to be allowed to precharge.  If insufficient time is allowed for
the RAS to accumulate its charge before DRAM refresh, refresh may
be...

Page 70

3-15
BIOS Setup
dedicated to graphics memory address space.  Host cycles that hit the aperture
range are forwarded to the AGP without any translation.  The option allows the
selection of an aperture size of 4MB, 8MB, 16MB, 32MB, 64MB, 128MB, and
256 MB.
Internal Graphics Mode Select
The field specifies the size of system memory allocated for video memory.
Settings: Disabled, 1MB, 4MB, 8MB, 16MB, 32MB. 
Start reading MSI 865pe Neo2 V Manual

Related Manuals for MSI 865pe Neo2 V Manual

All MSI manuals