MSI 865pe Neo2 V Manual

Using 2-, 4- or 6-Channel Audio Function
A-15
3. Xear 3D-5.1 Virtual SPEAKER SHIFTER
This part provides an advanced, amazing and considerate feature-
dynamically adjustable multi-channel sound system no matter  what listening
appliance you are using and what application you are running.
The default setting for SPEAKER SHIFTER is OFF, thus you have to click
on it to make it ON, in which all the speakers are available to adjust.
You may move Front-Left, Front-Right, Rear-Left, Rear-Right virtual speakers...

A-16
MS-6728 ATX Mainboard
Xear 3D- Play3D Demo
Xear 3D Advanced Program also provides interesting Play3D demo programs
for helping you configure your audio environment.
If you click One Touch Setup during the setup procedure when you insert
the MSI software driver, you may only see the Sound Effect tab in the Xear 3D
Advanced Program. Demo Program will not be installed automatically. Please
click C-Media Sound Drivers again for the complete installation of C-Media
applications. Please note the Setup...

Using 2-, 4- or 6-Channel Audio Function
A-17
The Xear3D Sound - Play3D Demo program is showed as follows:
Five built-in Sound Sources.
Six Envornment Effects,
which will synchronize with
the Environment setting on
“Sound Effect” part.
Five Moving Paths. 

A-18
MS-6728 ATX Mainboard
In the Moving Path selection, you may adjust your virtual speakers before
playing 3D audio applications like gaming. When clicking each of the Moving
Path icons (Drag Path, Horizontal Circle, Vertical Circle, Z Path and Random
Curve), a rea moving ball indicates the 3D source source position. The Drag
Path is recommended becuase it’s the most flexible one.
3D Sound Source position
indicator. 

Using 2-, 4- or 6-Channel Audio Function
A-19
Attaching Speakers
To perform multichannel audio operation, connect multiple speakers to
the system.  You should connect the same number of speakers as the audio
channels you will select in the software utility.
Using S-BRACKET connectors:
S-Bracket is an optional accessory.  It gives access to analog and digital
audio output by integrating both SPDIF (Sony & Philips Digital Interface) and
analog LINE OUT connectors.  To use the S-Bracket, you should select...

A-20
MS-6728 ATX Mainboard
4-Channel Analog Audio Output
Description:
Connect two speakers to back panel’s Line Out
connector and two speakers to one Line Out
connector of S-Bracket.
2-Channel Analog Audio Output
We recommend that you should still attach the speakers to BACK PANEL’s
Line Out connector during 2-channel audio mode even though S-Bracket’s
Line Out connectors function properly.
1 MIC
2 Line Out (Front channels)
3 Line In
4 Optical SPDIF jack
5 Coaxial SPDIF jack
6 Line Out (Center and...

Using 2-, 4- or 6-Channel Audio Function
A-21
6-Channel Analog Audio Output
Description:
Connect two speakers to back panel’s Line Out
connector and four speakers to both Line Out
connectors of S-Bracket. 1 MIC
2 Line Out (Front channels)
3 Line In
4 Optical SPDIF jack
5 Coaxial SPDIF jack
6 Line Out (Center and Subwoofer channel)
7 Line Out (Rear channels)
S-Bracket
1
2
3    Back Panel
6
7
4
5 

A-22
MS-6728 ATX Mainboard
1 Optical SPDIF jack
2 Coaxial SPDIF jack
3 Line Out
4 Line OutDescription:
Select the correct type of SPDIF jack to connect
SPDIF speakers.  For optical connection,
remove the plug from the S-Bracket before
inserting the fiber-optic cable to it.
Digital Audio Output (2-Channel only)
For digital audio output, use the SPDIF (Sony & Philips Digital Interface)
connectors supplied by S-Bracket.  First, connect the SPDIF speakers to the
appropriate SPDIF jack, and then select the...

T-1
Troubleshooting
Troubleshooting
Troubleshooting
Q: Where will I find the model number of the mainboard?
A: There are two places where you can find the model number of the mainboard:
1. Somewhere between the PCI slots you shall find MS-xxxx or the marketing
name like “K7T Turbo”. You can also find the version number beside it. 2. At
the back cover of the users manual.
Q: What do you mean by PCB version 1?
A: PCB is printed circuit board. Saying PCB version 1 is the same as saying
motherboard version...

T-2
MS-6728 ATX Mainboard
Q: I have high speed CPU cooling fan like Taisol CGK760092, Vantec CCK-
6035D & GlobalWin WBK38. Can I install the fan directly to the
motherboard?
A: We strongly recommend that you do NOT connect those described CPU
fan directly to your motherboard, as it draws so much power, that it could
damage it. Please use a 3-Pin to 4-Pin Cable that comes together with the fan.
Q: Can I use more than 512MB memory on Win9x or WinME?
A: No, you can’t. You can only use more than 512MB memory...