MSI 865pe Neo2 V Manual

Using 2-, 4- or 6-Channel Audio Function
A-5
To have 4-/6-channel audio work, you must set appropriate configuration in
the C-Media software application. Click the C-Media Mixer  icon            from the
window tray on the bottom, and choose Open.
Then the “C-Media 3D Audio Configuration” will appear . Click on the
Speaker Output tab to configure the audio.
Speaker Output
1. Without the optional S-Bracket:
Software Configuration
h Bass Enhancement: You may enable the Bass Enhancement option to enhance...

A-6
MS-6728 ATX Mainboard
2. With the optional S-Bracket:
Attach the optional S-bracket and the audio output will function as the
screen showed. h Center/Bass Output Swap: Enabling this option will exchange the center/
bass output channel. PC speaker manufactures define typically that the center
signal is delivered by tip of the stereo plug and the bass signal is by ring of it,
as the figure showed below. However, some speakers have opposite definition.
Please use this option to solve the possible...

Using 2-, 4- or 6-Channel Audio Function
A-7
When you choose 6CH, the audio output will function as the screen showed
below.
Check the Speaker Test tab in the right side. It shows the speaker figure and
test environment complying with your speaker type settings as follows. You
can click Auto Test button or just click each speaker for testing your audio
connection. The sound will repeat unless you click Stop. 

A-8
MS-6728 ATX Mainboard
S/PDIF
Click on the S/PDIF tab and the following screen appears.
h Playing Audio (48 kHz Output): Playing Digital Audio to Digital S/PDIF
Output. Choosing this option allows the output digital playing audio from
your computer like DVD, VCD, digital CD, MP3, Wave... etc through S/PDIF
in 48KHz sample rate.
h Analog Input to S/PDIF-Out: Convert Analog Input to Digital S/PDIF Out.
This function is to convert analog input audio like Line-in, CD-in,
Microphone-in signal to S/PDIF...

Using 2-, 4- or 6-Channel Audio Function
A-9
h Select Source: Since the analog input signal needs to be recorded and
converted to digital format, you have to click Select Source button and
select one analog source in the “Select Source” window. Actually the selected
item synchronizes with the recording panel of Microsoft. Choose the Analog Input to S/PDIF-Out and then click the Select Source
button. Then the Select Source window appears. 

A-10
MS-6728 ATX Mainboard
You may regulate each volumn to the speaker for current playing digital
sound sources. If you use 2-channel speaker, only Front Left and Front Right
bars are available for you to configure. If you use 4-channel speaker, only
Front Left, Front Right, Rear Left and Rear Right bars are available. In 6-channel
mode, you may adjust all the speakers as showed above.
h Loudness (AGC): Loudness w/Auto-Gain-Control: When you want a higher
volume level of digital audio, you can enable...

Using 2-, 4- or 6-Channel Audio Function
A-11
Microphone
Click on the Microphone tab and the following screen appears.
h Mute Microphone: Check this item to disable microphone inputs.
h Microphone Selection: You may select the microphone input you are going
to use. But if your system does not support 2 microphone inputs, then you
won’t see two items.
The  real-panel microphone jack is sometimes shared by center/subwoofer
output and will be grayed as below: when you set 6CH speaker output. At
this moment,...

A-12
MS-6728 ATX Mainboard
Xear 3D
Click on the Xear 3D tab and the following screen appears.
C-Media UDA driver now supports Xear 3D-5.1 Virtual SPEAKER
SHIRFTER and sound effects. Just click the left button           in Xear 3D tab and
the new friendly/fancy graphic user interface will pop up as follows. 

Using 2-, 4- or 6-Channel Audio Function
A-13
From this part, you may choose the sound effect you like from 27 environ-
ment effects, 3 environment sizes and 10-band pre-set equalizer.
1. Sound Effect
You may choose the
provided environ-
ments by clicking the
buttons (Bathroom,
Concert Hall, Sewer
Pipe and Music Pub)
or use the drop-down
lists to choose more.Listening Environ-
ment Size.
10-Band Equalizer.
12 Pre-set Equalizer
Models. 

A-14
MS-6728 ATX Mainboard
You may click each speaker to get one channel sound. If it has sound, it will
be lighted up. You may also click each speaker to test your connection/
configuration. Moreover, it can help you to adjust your virtual speakers for
multi-channel audio applications, like DVD.
2. Demo Program
This part contains multi-channel music (including speakers testing) demo
program.
3 pieces of 5.1-channel
music for your selection.
5.1-channel speaker
environmenmt.