Motorola Wing 5 Manual

DHCP-SERVER-POLICY 13 - 37
13.1.3.3 static-binding
dhcp-pool-mode
Configures static IP address information for a particular device. Static address binding is executed on the device’s 
hostname, client identifier, or MAC address. Static bindings allow the configuration of client parameters, such as DHCP 
server, DNS server, default routers, fixed IP address etc.
Table 13.5static-binding commands
Command Description Reference
static-bindingConfigures a static binding policypage 13-38 

13 - 38 WiNG CLI Reference Guide
13.1.3.3.1 static-binding
static-binding
Configures static address bindings
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
static-binding [client-identifier |hardware-address ]
Parameters
• static-binding [client-identifier |hardware-address ]
client-identifier  Enables static binding configuration for a client based on its client identifier as 
provided by DHCP option 61 and...

DHCP-SERVER-POLICY 13 - 39
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#static-binding client-identifier 
test
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-test)#?
DHCP static binding Mode commands:
  bootfile             Boot file name
  client-name          Client name
  default-router       Default routers
  dns-server           DNS Servers
  domain-name          Configure domain-name
  ip-address           Fixed IP address for host
  netbios-name-server  NetBIOS (WINS)...

13 - 40 WiNG CLI Reference Guide
13.1.3.3.2 static-binding-mode
Table 13.6 summarizes static binding mode commands
Table 13.6static-binding Commands
Command Description Reference
bootfileAssigns a bootfile name for the DHCP configuration on the network poolpage 13-41
client-nameConfigures a client namepage 13-42
default-routerConfigures default router or gateway IP addresspage 13-43
dns-serverSets the DNS server’s IP address available to all DHCP clients connected 
to the DHCP poolpage 13-44...

DHCP-SERVER-POLICY 13 - 41
13.1.3.3.3  bootfile
static-binding-mode
The Bootfile command provides a diskless node the path to the image file used while booting up. Only one file can be 
configured for each static IP binding.
For more information on the BOOTP protocol with reference to static binding, see bootp.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
bootfile 
Parameters
• bootfile 
Examples...

13 - 42 WiNG CLI Reference Guide
13.1.3.3.4  client-name
static-binding-mode
Specifies a name for a client
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
client-name 
Parameters
• client-name 
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#client-name RFID
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#
Related Commands
 Specify a name for a client where this static binding...

DHCP-SERVER-POLICY 13 - 43
13.1.3.3.5  default-router
dhcp-pool-mode
Configures a default router or gateway IP address for the static binding configuration
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
default-router  {}
Parameters
• default-router  {}
Usage Guidelines
The IP address of the router should be on the same subnet as the client subnet.
Examples...

13 - 44 WiNG CLI Reference Guide
13.1.3.3.6  dns-server
dhcp-pool-mode
Configures the DNS server for this static binding configuration. This DNS server supports the client for which the static 
binding has been configured.
For this client, the DNS server’s IP address maps the host name to an IP address. DHCP clients use the DNS server’s IP 
address based on the order (sequence) configured.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000...

DHCP-SERVER-POLICY 13 - 45
13.1.3.3.7  domain-name
dhcp-pool-mode
Sets the domain name for the static binding configuration
For this client, the DNS server’s IP address maps the host name to an IP address. DHCP clients use the DNS server’s IP 
address based on the order (sequence) configured.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
domain-name 
Parameters
• domain-name 
Examples...

13 - 46 WiNG CLI Reference Guide
13.1.3.3.8  ip-address
static-binding-mode
Configures a fixed IP address for a host
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
ip-address 
Parameters
• ip-address 
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#ip-address 172.16.10.9
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-1)#
Related Commands
  Configures a fixed host IP address in...