Motorola Wing 5 Manual

DHCP-SERVER-POLICY 13 - 7
13.1.2.2.1 multiple-user-class
dhcp-class-mode
Enables the multiple user class option for the DHCP policy
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
multiple-user-class
Parameters
None
Examples
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#multiple-user-class
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#
Related Commands
noResets values or disables the DHCP user...

13 - 8 WiNG CLI Reference Guide
13.1.2.2.2 no
dhcp-class-mode
Negates a command or sets its default
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
no [multiple-user-class|option]
Parameters
• no multiple-user-class
• no option user-class 
Examples
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#no multiple-user-class
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#
Related Commands
no...

DHCP-SERVER-POLICY 13 - 9
13.1.2.2.3 option
dhcp-class-mode
Configures the DHCP server options for use with this DHCP user class
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
option user-class 
Parameters
• option user-class 
Examples
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#option user-class hex
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#
Related Commands
user-class  Configures a DHCP...

13 - 10 WiNG CLI Reference Guide
13.1.3 dhcp-pool
dhcp-server-policy
The DHCP pool commands create and manage a pool of IP addresses. These IP addresses are assigned to devices using 
the DHCP protocol. IP addresses have to be unique for each device in the network. As IP addresses are finite, DHCP 
mechanism enables the reuse of finite addresses by keeping track of their issue, release and reissue. 
The DHCP pool commands configure a finite set of IP addresses that can be assigned whenever a device...

DHCP-SERVER-POLICY 13 - 11
13.1.3.1 dhcp-pool
dhcp-server-policy
Configures a DHCP server address pool. An address pool is a set of IP addresses allocated to devices as they are authorized 
to access network resources. This enables the reuse of limited IP address resources for deployment in any network. A 
separate instance opens where you can configure DHCP pool parameters.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000...

13 - 12 WiNG CLI Reference Guide
Examples
rfs7000-37FABE(config-dhcp-policy-test)#dhcp-pool pool1
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#?
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#?
DHCP pool Mode commands:
  address              Configure network pools included addresses
  bootfile             Boot file name
  ddns                 Dynamic DNS Configuration
  default-router       Default routers
  dns-server           DNS Servers
  domain-name          Configure domain-name...

DHCP-SERVER-POLICY 13 - 13
13.1.3.2 dhcp-pool-mode
dhcp-pool
Configures the DHCP pool commands
Table 13.4 summarizes DHCP pool commands
Table 13.4dhcp-pool commands
Command Description Reference
addressSpecifies a range of addresses for a DHCP poolpage 13-14
bootfileAssigns a bootfile name. The bootfile name can contain letters, 
numbers, dots and hyphens. Consecutive dots and hyphens are not 
permitted page 13-15
ddnsConfigures dynamic DNS parameterspage 13-16
default-routerConfigures a default-router...

13 - 14 WiNG CLI Reference Guide
13.1.3.2.1 address
dhcp-pool-mode
Specifies a range of addresses for the DHCP pool. This is the range of IP addresses assigned to each device that joins the 
network.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
address [|range  ] {class }
Parameters
• address [|range  ] {class }
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#address range 1.2.3.4 5.6.7.8 
class...

DHCP-SERVER-POLICY 13 - 15
13.1.3.2.2 bootfile
dhcp-pool-mode
The Bootfile command provides a diskless node path to the image file while booting up. Only one file can be configured 
for each DHCP pool.
For more information on the BOOTP protocol with reference to the DHCP policy, see bootp.
Supported in the following platforms:
 AP300
 AP621
 AP650
 AP6511
 AP6521
 AP6532
 AP71XX
 RFS4000
 RFS6000
 RFS7000
 NX9000
 NX9500
Syntax
bootfile 
Parameters
• bootfile 
Examples...

13 - 16 WiNG CLI Reference Guide
13.1.3.2.3 ddns
dhcp-pool-mode
Configures Dynamic DNS (DDNS) parameters. Dynamic DNS provides a way to access an individual device in a DHCP 
serviced network using a static device name.
Depending on the DHCP server configuration, the IP address of a device changes periodically. To enable the device to be 
accessible, its current IP address has to be published to a server that can resolve the static device name used to access 
the device with its changing IP address....