Motorola Sb1 Owners Manual
Here you can view all the pages of manual Motorola Sb1 Owners Manual. The Motorola manuals for PDA are available online for free. You can easily download all the documents as PDF.
Page 41
Chapter 4 Accessories Introduction The SB1 accessories provide a variety of product support capabilities. Table 4-1 lists the SB1 accessories. Table 4-1SB1 Accessories AccessoryDescription Cradles Single Slot Charging Cradle Charges the battery within the SB1. Ten Slot Charge Only Cradle Charges up to ten SB1s. Charging Power Supply (12 VDC, 4.16 A) Provides power to the Ten Slot Charge Only Cradle. Power Supply (5 VDC, 850 mA) Provides power to the Single Slot Charging Cradle. Miscellaneous Holster...
Page 42
4 - 2 SB1 User Guide Single Slot Charging Cradle CAUTIONEnsure to follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. Use the Single Slot Charging cradle to charge the SB1 battery. To charge the SB1 battery: Figure 4-1Single Slot USB Cradle 1.If attached, remove the SB1 from the lanyard or holster tether. 2.Slide the SB1 into the slot with the Scan button facing up and the displ\ ay facing out. NOTEIf an Headset Adapter or Speaker Adapter is attached to the SB1...
Page 43
LED Scan Button Accessories 4 - 3 Figure 4-2Single Slot USB Cradle The Charging screen displays and the SB1 LED Indicator indicates the SB1\ battery charging status. The battery charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications. 3.When charging is complete, the SB1 may be removed from the cradle.
Page 44
4 - 4 SB1 User Guide Ten Slot Charge Only Cradle CAUTIONEnsure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1 . Use the Ten Slot Charge Only cradle to charge up to ten SB1s simultaneously. To charge the SB1: Figure 4-3Ten Slot Charge Only Cradle 1.If attached, remove the SB1 from the lanyard or holster tether. 2.Slide the SB1 into the slot with the Scan button facing up. 3.Push down on the SB1 until it snaps into place. Verify the SB1 is secure in...
Page 45
LED Scan Button Accessories 4 - 5 Figure 4-4Insert SB1 into Ten Slot Charge Only Cradle The Charging screen displays and the SB1 LED Indicator indicates the SB1\ battery charging status. The battery charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications. 4.When charging is complete, the SB1 may be removed from the cradle.
Page 46
4 - 6 SB1 User Guide Headset Adapter Use the Headset Adapter to add audio functionality to the SB1. To attach the Headset Adapter to the SB1: 1.Plug a headset plug into the headset jack on the Headset Adapter. Figure 4-5Attach Headset Jack to Headset Adapter 2.Align the Headset Adapter magnets with the adapter mounting points on the back of the SB1.\ Magnets Figure 4-6Align Headset Adapter with SB1 3.Lower the Headset Adapter onto the SB1. The Headset Adapter snaps onto the SB1. The SB1 sounds two...
Page 47
Accessories 4 - 7 Figure 4-7Headset Adapter on SB1 To remove the Headset Adapter from the SB1, grasp the edge of the Headset Adapter at the top edge of the SB1 and lift. Figure 4-8Remove Headset Adapter
Page 48
4 - 8 SB1 User Guide Speaker Adapter Use the Speaker Adapter to add audio and Push-to-Talk functionality. To install the Speaker Adapter onto the SB1: 1.Slide the Speaker Adapter onto the SB1 from the side ensuring that the Home button wraps a\ bout the SB1. Magnets Figure 4-9Align Speaker Adapter 2.Lower the Speaker Adapter onto the SB1. The Speaker Adapter snaps onto the SB1. The SB1 sounds three beeps to indicate that the adapter is connected properly. 3.Ensure the adapter is laying flat on the SB1....
Page 49
Accessories 4 - 9 Holster Use the holster to store the SB1 when not in use. The holster holds the SB1 on a belt or waist band and provides a tether to attach the SB1 to the holster. Figure 4-11Holster Feed the clip end through the lanyard slot and snap together. Figure 4-12Install Clip onto SB1 Place the SB1 into the holster with the Scan button facing down and the \ screen facing the holster. Push the SB1 into the holster until it snaps into place.
Page 50
4 - 10 SB1 User Guide Figure 4-13Install SB1 onto Holster To remove the SB1 from the holster, pull on the top of the SB1 away from the body.