Motorola Sb1 Owners Manual

ABOUT THIS GUIDE
Introduction
This guide provides information about using the SB1 smart badge and acce\
ssories.
NOTEScreens and windows pictured in this guide are samples and may differ from actual screens.
Documentation Set
The documentation set for the SB1 is divided into guides that provide in\
formation for specific user needs.
•SB1 Regulatory Guide - provides all regulatory and safety information.
•SB1 User Guide - describes how to use the SB1.
•SB1 Integrator Guide - describes how to set up and...

x SB1 User Guide
2.Touch . The Settings screen appears.
3.Touch . The More Settings screen appears.
4.Touch Software Version. The  Software Version screen lists the operating system (OS), RhoElements, 
application folder and SB1 Shell version numbers.
Chapter Descriptions
Topics covered in this guide are as follows:
•Chapter 1, Getting Started, describes the SB1’s physical characteristics, how to charge the SB1 and start 
the SB1 for the first time.
•Chapter 2, Operation, provides basic instructions for...

About This Guide xi
Related Documents and Software
The following items provide more information about the SB1.
•SB1 Regulatory Guide, p/n 72-162415-xx
•SB1 Integrator Guide, p/n 72E-164712-xx
•SB1 Programmer’s Guide, p/n 72E-170991-xx
For the latest version of this guide and all guides, go to: 
http://supportcentral.motorola.com
Service Information
If you have a problem with your equipment, contact Motorola Solutions Gl\
obal Customer Support for your 
region. Contact information is available at:...

xii SB1 User Guide 

CHAPTER 1 GETTING STARTED
Introduction
The SB1 is a brand new category of mobile device that employers can give to every retail associate. This truly 
smart badge is full of the features every associate needs to deliver the best customer experience, with the 
connectivity needed to keep them productive, every minute of every day. The badge each associate wears can 
allow associates to: access a personalized task list; accept tasks and acknowledge completion; scan a bar 
code to check price and inventory;...

1 - 2 SB1 User Guide
Features
The features of the SB1 are shown in Figure 1-1.
Home Button*E Ink
® Display
Scan Button
Lanyard Slot
Bar Code Reader
LED
Adapter Mounting Points
I/O Contacts
Charging 
Contacts
* The Home button can be programmed to add a pause button function. See th\
e  SB1 Programmer’s Guide.
Figure 1-1SB1 smart badge 

Getting Started 1 - 3
Charging the SB1
CAUTIONFollow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1. 
 
The SB1 must be charged within the 0 °C to +35 °C (32 °F to 95\
 °F) ambient temperature range.
 
When the SB1 is off it displays the Regulatory Label information screen.
Figure 1-2Out of the Box Screen
Use the Single Slot Charging cradle or Ten Slot Charge Only cradle to charge the SB1. To charge the SB1, 
slide it into the cradle slot with the Scan button facing...

1 - 4 SB1 User Guide
 
Figure 1-4Calibration Screen
Leave the SB1 in the cradle until it is fully charged. The LED indicates the SB1 battery charging status. The 
battery fully charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications. 
When the LED lights green remove the SB1 from the cradle.
Carefully press and briefly hold finger tip on the center of the  Calibration screen target. Repeat the procedure 
as the target moves and stops at dif
 ferent locations on the...

Getting Started 1 - 5
Figure 1-6Battery Charging Screen
Resetting the SB1
If the SB1 stops responding to input, perform a reset. A reset stops all running applications and any unsaved 
data is lost. Simultaneously press and hold the Home and Scan buttons fo\
r five seconds. When the SB1 beeps 
release the buttons and then it resets.
Powering Off the SB1
Power off the SB1 when not using for long periods of time.
1.Press the Home button.
2.Touch . The Settings screen appears.
3.Touch . The More Settings...

1 - 6 SB1 User Guide