Motorola Sb1 Owners Manual

							Chapter 4 Accessories
Introduction
The SB1 accessories provide a variety of product support capabilities. Table 4-1 lists the SB1 accessories.
Table 4-1SB1 Accessories 
AccessoryDescription
Cradles
Single Slot Charging Cradle Charges the battery within the SB1.
Ten Slot Charge Only Cradle Charges up to ten SB1s.
Charging
Power Supply (12 VDC, 4.16 A) Provides power to the Ten Slot Charge Only Cradle.
Power Supply (5 VDC, 850 mA) Provides power to the Single Slot Charging Cradle.
Miscellaneous
Holster Provides a clip-on holder for the SB1.
Armband Provides a way to mount the holster for the SB1 on your arm.
Lanyard Use to hold the SB1 around your neck.
Headset Adapter Provides audio to a wired headset.
Speaker Adapter Provides speaker for Push-To-Talk functionality.
Earbud Headset Provides audio for hands-free PTT conversations. Contains ear fit 
speaker

, PTT button and volume control. 
						

							4 - 2 SB1 User Guide
Single Slot Charging Cradle
CAUTIONEnsure to follow the guidelines for battery safety described in Battery Safety Guidelines on page 5-1.
Use the Single Slot Charging cradle to charge the SB1 battery. To charge the SB1 battery:
Figure 4-1Single Slot USB Cradle
1.If attached, remove the SB1 from the lanyard or holster tether.
2.Slide the SB1 into the slot with the Scan button facing up and the displ\
ay facing out.
NOTEIf an Headset Adapter or Speaker Adapter is attached to the SB1 when placed into the cradle, the SB1 
beeps indicating that the audio functionality has been disabled. 
 
If the SB1 is playing audio when it is inserted into the cradle, the aud\
io is muted and un-muted when the 
SB1 is removed from the cradle. 
						

							LED Scan Button
Accessories 4 - 3
Figure 4-2Single Slot USB Cradle
The Charging screen displays and the SB1 LED Indicator indicates the SB1\
 battery charging status. The  battery charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications.
3.When charging is complete, the SB1 may be removed from the cradle. 
						

							4 - 4 SB1 User Guide
Ten Slot Charge Only Cradle
CAUTIONEnsure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 
5-1 .
Use the Ten Slot Charge Only cradle to charge up to ten SB1s simultaneously. To charge the SB1:
Figure 4-3Ten Slot Charge Only Cradle
1.If attached, remove the SB1 from the lanyard or holster tether.
2.Slide the SB1 into the slot with the Scan button facing up.
3.Push down on the SB1 until it snaps into place. Verify the SB1 is secure in the slot.
NOTEIf an Headset Adapter or Speaker Adapter is attached to the SB1 when placed into the cradle, the SB1 
beeps indicating that the audio functionality has been disabled. 
 
If the SB1 is playing audio when it is inserted into the cradle, the aud\
io is muted and un-muted when the 
SB1 is removed from the cradle. 
						

							LED Scan Button
Accessories 4 - 5
Figure 4-4Insert SB1 into Ten Slot Charge Only Cradle
The Charging screen displays and the SB1 LED Indicator indicates the SB1\
 battery charging status. The  battery charges in approximately four hours. See Table 1-1 on page 1-4 for charging status indications.
4.When charging is complete, the SB1 may be removed from the cradle. 
						

							4 - 6 SB1 User Guide
Headset Adapter
Use the Headset Adapter to add audio functionality to the SB1. To attach the Headset Adapter to the SB1:
1.Plug a headset plug into the headset jack on the Headset Adapter.
Figure 4-5Attach Headset Jack to Headset Adapter
2.Align the Headset Adapter magnets with the adapter mounting points on the back of the SB1.\
Magnets
Figure 4-6Align Headset Adapter with SB1
3.Lower the Headset Adapter onto the SB1. The Headset Adapter snaps onto the SB1. The SB1 sounds two 
beeps to indicate that the adapter is connected properly.
4.Ensure the adapter is laying flat on the SB1. If not, remove and re-atta\
ch. 
						

							Accessories 4 - 7
Figure 4-7Headset Adapter on SB1
To remove the Headset Adapter from the SB1, grasp the edge of the Headset Adapter at the top edge of the 
SB1 and lift.
Figure 4-8Remove Headset Adapter 
						

							4 - 8 SB1 User Guide
Speaker Adapter
Use the Speaker Adapter to add audio and Push-to-Talk functionality.
To install the Speaker Adapter onto the SB1:
1.Slide the Speaker Adapter onto the SB1 from the side ensuring that the Home button wraps a\
bout the SB1.
Magnets
Figure 4-9Align Speaker Adapter
2.Lower the Speaker Adapter onto the SB1. The Speaker Adapter snaps onto the SB1. The SB1 sounds 
three beeps to indicate that the adapter is connected properly.
3.Ensure the adapter is laying flat on the SB1. If not, remove and re-atta\
ch.
Figure 4-10Speaker Adapter Installed
NOTEWhen removing the Speaker Adapter from the SB1, the SB1 beeps indicating that the Speaker Adapter 
has been removed from the SB1. 
						

							Accessories 4 - 9
Holster
Use the holster to store the SB1 when not in use. The holster holds the SB1 on a belt or waist band and 
provides a tether to attach the SB1 to the holster.
Figure 4-11Holster 
Feed the clip end through the lanyard slot and snap together.
Figure 4-12Install Clip onto SB1
Place the SB1 into the holster with the Scan button facing down and the \
screen facing the holster.
Push the SB1 into the holster until it snaps into place.  
						

							4 - 10 SB1 User Guide
Figure 4-13Install SB1 onto Holster
To remove the SB1 from the holster, pull on the top of the SB1 away from the body.