Motorola I830 User Guide

							23
Receiving Calls
When you place a Direct Connect call, you must
enter the whole Direct Connect number including
the asterisks.
Tip:When you store a Direct Connect number in
Contacts it is good practice to include the
whole Direct Connect number including the
asterisks in case you travel with your
phone, or another Direct Connect user
whom you are trying to reach travels with
their phone, outside of your network.
Receiving CallsPhone CallsWhen you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Answering
If the flip is closed, presst.-or-
Open the flip.-or-
Presss.-or-
PressO.-or-
PressAunderYe s.-or-
Press any number key.To answer a call by opening the flip, you must have
theFliptoAnsfeatureturnedon(see“SettingFlip
Actions” on page 49). To answer a call by pressing
any number key, you must have the Any Key Ans
feature turned on (see “Phone Calls Features” on
page 108).
SendingtoVoiceMail
If the flip is closed, press..-or-
Presse.-or-
PressAunderNo.
Ending
If the flip is closed, press..-or-
Presse.-or-
Close the flip.
Direct Connect
®Calls
When you receive a Direct Connect call, your
phone emits a chirping sound or vibrates.
1Wait for the caller to finish speaking.
2Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3Release the PTT button to listen. 
						

							24Making CallsWays to Enter CallsUse the numbers on the keypad
Select the number from the recent calls list
Select the number from Contacts
Select a number stored in Datebook
Redial the last phone number called
Say a voice name into your phone
Use Speed Dial or Turbo Dial
®
Use One Touch Direct Connect to make a Direct
Connect call
Use a TTY device — see “Making TTY Calls” on
page 53From the KeypadTo enter the number you want to call, press the
numbers on the keypad.
Ifyoumakeamistake:
To clear a digit, pressAunderDelete.
To clear all digits, press and holdAunder
Delete.
To insert or delete a digit anywhere in the string
of digits you have entered, scroll left or right.
To c a n c e l , p r e s se.
From the Recent Calls ListThe recent calls list stores the last 20 calls you
made or received.
With the Flip Open
1From the main menu, selectRecent Calls.
2Scroll to the name or number you want to call.
With the Flip Closed
1Press.to display the most recent call.
2To view the rest of the recent calls list, press the
volume controls.
You can call the number displayed by pressingt
on the top of your phone.From ContactsIf you have numbers stored in Contacts, you can
use these numbers to make calls. For information
on entering numbers into Contacts, see “Creating
Entries” on page 38.
1From the main menu, selectContacts.
2Scroll to the name or number you want to call.
Tip:To find Contacts entries faster, use the
keypad to enter the first letter of the name. 
						

							25
Ways to Enter Calls
3Place the call now.-or-
Scroll left or right to display the Contacts type for
the number you want to call.
If you are making a Direct Connect call, your phone
places the call to the Direct Connect number stored
in the Contacts entry, even if the Direct Connect
icon is not displayed.
Ifyouaremakingaphonecall:
Your phone places the call to the phone number
assigned to the Contacts type displayed.
If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you
want to place the call to.
From DatebookIf you have numbers stored as part of events in
Datebook, you can use these numbers to make
calls. For information on storing events in
Datebook, see “Datebook” on page 98.
1From the main menu, selectDatebook.2Select the day of the event containing the
number you want to call.
3Highlight or select the event containing the
number you want to call.
For details, see “Making Calls From Datebook” on
page 103.
Redialing the Last NumberPress and holdsto place a call to the last phone
number you called.Using a Voice NameIfyouhavecreatedavoicenameinContactsfor
the number you want to call, say the voice name
intoyourphonetoenterthenumber.Seepage37
for information on voice names.
You can use a voice name to enter a number with
theflipopenorclosed.
1Press and holdtuntil a prompt appears
tellingyoutosaythevoicename.
2Speaking into the microphone, say the voice
name assigned to the number you want to call.
Your phone plays the name back to you.
If you are making a phone call, the call is placed
automatically. 
						

							26Making Calls
Tip:To stop a phone call from being completed,
press.if the flip is closed or presse.
If you are making a Direct Connect call, press and
holdthePTTbuttontoplacethecall.Using Speed Dial and Turbo Dial
®
Each phone number stored in Contacts is assigned
a Speed Dial number which you can use to call that
number.
Speed Dial
1From the idle screen, use the keypad to enter
the Speed Dial number assigned to the phone
number you want to call.
2Press#.
3Presss.
Tu rb o D i a l
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.Using One Touch Direct Connect
®
One Touch Direct Connect sets your phone to call
the most recent Direct Connect number on the
recent calls list, or a Direct Connect number you
choose, every time you press the PTT button. See
“Setting One Touch Direct Connect
®” on page 48.
Missed Phone CallsWhen you miss a call, this icon
V
and the number
of phone calls you have missed appear briefly.
With the Flip Open
Ifyouwanttodismissthemissedcallmessage,
pressAunderBack.-or-
If you want to view the missed call on the recent
calls list, pressAunderView.
With the Flip Closed
Ifyouwanttodismissthemissedcallmessage,
press..
If you want to view the missed call on the recent
calls list, press.twice.
Using SpeakerphoneTurning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
areonanactivephonecall.
With the Flip Open
To turn speakerphone on or off:
PressAunderSp kr.-or-
Presst. 
						

							27
Using Mute
With the Flip Closed
When you make a call with the flip closed,
speakerphone is always on.
Opening the flip turns speakerphone off.
Using MuteMuting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
To turn mute on:
PressAunderMute.
Whilemuteison,Unmuteappears as a display
option.
To turn mute off:
PressAunderUnmute.Making Emergency Phone
CallsYour phone supports emergency calling.
Emergency phone calls can be made even when
your SIM card is blocked or not in your phone.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phones GPS antenna has established a clear
view of the open sky and your local emergency
response center has the equipment to process
location information. See “GPS Enabled” on page
88, and particularly “IMPORTANT: Things to Keep
in Mind” on page 88 and “Making an Emergency
Call” on page 89, for more information on the
limitations of this feature. Because of the
limitations of this feature, always provide your best
knowledge of your location to the emergency
response center when you make an emergency
call.
Important: Emergency calls cannot be placed while
the keypad is locked.
Important: If you have not registered on the
network, emergency calls cannot be
placed while your SIM card is in your
phone. 
						

							28Making CallsImportant: If you are bringing your phone number
to Nextel from your previous carrier,
you may receive a temporary telephone
number while your Nextel phone is
being programmed with your
permanent phone number. If you make
a call to 911 and the call fails, the 911
emergency response center will not be
able to call you back on your Nextel
phone if in the meantime, your Nextel
phone has been programmed with your
permanent telephone number. If the call
is disconnected before location and
details have been provided, call 911
again and advise that you were
disconnected. 
						

							29
Call AlertsSending a call alert lets the recipient know you
want to talk to him or her on a Direct Connect call.
When you send a call alert, the recipient’s phone
emits a series of beeps, or vibrates, and displays
your name or Direct Connect number.
The recipient can:
Answer — begin a Direct Connect call with the
sender
Queue — store the call alert to the call alert
queue, which is a list of call alerts
Clear — dismiss and delete the call alertSending Call Alerts1Enter the Direct Connect number you want to
send to, as you would when making a Direct
Connect call.
2PressAunderAlert.Ready to Alertappears
on the display.
3Press the PTT button untilAlert Successful
appears on the display.
Note:If the alert is not successful, this may
meanthepersonyouaretryingtoreachis
on a call or has the phone turned off.
Receiving Call AlertsWhen you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls
or Direct Connect calls until you do.
To answer a call alert:
Press the PTT button to make a Direct Connect
call to the sender.
To queue a call alert:
PressAunderQueue.
To clear a call alert:
PressO.-or-
PressAunderClear.-or-
If the flip is closed, press..
Note:The recent calls list also stores call alerts
you have received. They appear as Direct
Connect calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.Using the Call Alert QueueWhen you queue a call alert, it remains in the call
alert queue until you make a Direct Connect call to
the sender or delete it. 
						

							30Call AlertsViewing Call Alerts1From the main menu, selectCall Alert.
2Scroll through the list.Viewing Date and TimeTo view the date and time a call alert was received:
1From the main menu, selectCall Alert.
2Select the call alert you want information on.Responding to Call Alerts in the
QueueAfter you queue a call alert, you can respond to it
by making a Direct Connect call to the sender or
sending a call alert to the sender.
Making a Direct Connect Call to the Sender
1From the main menu, selectCall Alert.
2Scrolltothecallalertyouwanttorespondto.
3PressthePTTbuttontobeginthecall.
This removes the call alert from the queue.
Sending a Call Alert to the Sender
1From the main menu, selectCall Alert.
2Scrolltothecallalertyouwanttorespondto.
3PressAunderAlert.Ready to Alertappears
on the display.4Press the PTT button untilAlert Successful
appears on the display.
Deleting Call AlertsTo delete a call alert from the queue:
1From the call alert queue, scroll to the call alert
you want to delete.
2Pressm.
3SelectDelete.
4PressOor pressAunderYe sto confirm.
To delete all call alerts from the queue:
1From the call alert queue, pressm.
2From the call alert menu, selectDelete All.
3PressOor pressAunderYe sto confirm.Sorting Call AlertsTip:Youmusthaveatleastonecallalertinthe
queue to access this feature.
To sort call alerts by the order they were received:
1From the main menu, selectCall Alert.
2Pressm.
3SelectSort By.
4SelectFirst on ToporLast on Top. 
						

							31
Recent CallsThe recent calls list stores the numbers of the 20
most recent calls you have made and received.
If the number of a recent call is stored in Contacts,
the name associated with the number appears on
the recent calls list.
An icon appears beside the name or number
indicating the Contacts type of the number used in
thecall.See“Contacts”onpage36.
For phone calls, an icon appears to the left of the
name or number giving more information about the
call:
Note:The recent calls list also stores call alerts
you have received. They appear as Direct
Connect calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.
Viewing Recent CallsWith the Flip Open
1From the main menu, selectRecent Calls.
2Scroll through the list.
To get more information on a recent call:
From the recent calls list, select the call you
want information on.
This displays information such as the name
associated with the call, the number, the date,
time, and duration of the call.
With the Flip Closed
1Press.to display the most recent call.
2To view the rest the recent call list, press the
volume controls.
3Press.to dismiss the recent calls list.
Tip:Presstto call the number displayed.Storing Recent Calls to
Contacts1From the recent calls list, scroll to the number
you want to store.
X
A call you made.
W
A call you received.
V
A missed call. Missed calls appear on the
recent calls list only if you have Caller ID. 
						

							32Recent Calls
2PressAunderSto re.-or-
IfSto reis not one of your options: Pressm.
SelectStore.
Tip:IfStoreis not on this menu, the number is
already stored in Contacts.
3To store the number as a new entry, select[New
Contact].-or-
To store the number to an existing entry, select
the entry.
4With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number. For information on
Contacts types, see page 36.
5If you want to add more information to the entry,
follow the applicable instructions in “Creating
Entries” on page 38.
6PressAunderDone.Deleting Recent CallsTo delete a call:
1From the recent calls list, scroll to the call you
want to delete.
2PressAunderDelete.-or-
IfDeleteis not one of your options: Pressm.
SelectDelete.3PressOor pressAunderYe sto confirm.
To delete all calls:
1From the recent calls list, pressm.
2SelectDelete All.
3PressOor pressAunderYe sto confirm.