Motorola I60c User Guide

							13
Turning Your i 60c Phone On/Off
If your display reads No Service or doesn’t change to the idle screen when you 
turn on your phone, and you know you are in a Nextel coverage area, contact 
Nextel Customer Care. For details on Nextel coverage areas, go to nextel.com.
To power the phone off:
4If you have enabled your SIM PIN security feature (see “Enabling/
Disabling the PIN Security Feature” on page 15), the Enter SIM PIN 
Code screen displays. Enter your SIM PIN (see “Entering the SIM 
PIN” on page 17).
Press C under OK.
5As your phone connects to the Nextel 
National Network, you will see We l c o m e  
To  N e x t e l and a connecting message. 
When the idle screen appears on the 
display as shown here, you are ready to 
use your i60c phone!
1Press and hold p on the keypad until a tone briefly sounds and 
Powering Off displays.
2Close the phone cover.
3Push down the antenna.
O 
						

							14
nextel.com
Enabling Over-the-Air-Radio-Service Software 
(OARSS) Security
To receive OARSS programming, you must enable OARSS security the first 
time you power on your phone or within 20 days of first activation of your 
phone. See “Receiving OARSS Programming” on page 14.
Receiving OARSS Programming
If you have been set up to receive OARSS programming, you will receive your 
Private ID and Talkgroup lists for Direct Connect use, your Personal Telephone 
Number, and the Nextel Customer Care number via a Net Alert message.
In order to receive your programming, you must have enabled OARSS security 
(see “Enabling Over-the-Air-Radio-Service Software (OARSS) Security” on 
page 14). Within 24 hours of enabling OARSS security, you will receive a Net 
Alert message containing your lists.
Accepting Your Phone’s Programming
1When you power on your phone for the first time, after the idle screen 
appears, you will be prompted to select OK to update your browser info.
NOTE: If you press C under LATER, you will be prompted to enable 
security each time you power on your phone until you press 
C under OK. It is recommended that you do not choose 
LATER.
2Press A under OK. 
3You are prompted to enable security. Press C under YES.                      
A series of screens display. If you subscribe to a Nextel OnlineSM 
Service plan, your home page displays.
4Press * to return to the idle screen. 
1You will receive a Net Alert with the message New Browser Message – 
Receive Programming Info.
2Press A under GOTO.
3You are prompted to accept changes to your phonebook. Press A 
under OK.
4A confirmation screen displays. Press A under OK. 
						

							15
SIM Card
NOTE: Closing the phone cover does not terminate Over-The-Air 
Programming in progress.
SIM Card
Your phone comes with a built-in level of security protection through the use of 
the SIM card. The SIM card stores all your Phonebook information and your 
Nextel account identification information. Since this information is stored on 
the SIM card, not in your phone itself, you can remove the information by 
removing the SIM card.
NOTE: Except for making emergency calls, your phone will not 
function without the SIM card.
The SIM card is located in the SIM card holder on the back of the phone, 
underneath the battery. You can verify the SIM card is in place by removing the 
battery and viewing the SIM card through the SIM card cover.
See “Inserting/Removing the SIM Card” on page 19 for information on locating 
the SIM card. If there is no SIM card in your phone, notify your Nextel 
Authorized Representative.
SIM Card Personal Identification Number (PIN) 
To prevent unauthorized use of your account, you can protect your SIM card by 
enabling the SIM PIN security feature. With the SIM PIN enabled, you must 
enter your PIN each time the phone is powered on. You can change or disable 
your PIN if desired.
NOTE: It is recommended that you enable the SIM PIN security feature 
to prevent fraudulent use of the SIM card, your i60c phone, and 
your account.
Enabling/Disabling the PIN Security Feature
Once the PIN security feature is enabled, you are prompted to enter your PIN 
each time you turn on your phone. Until a valid PIN is entered, you can use the 
phone only to make emergency calls. 
5You are prompted again to accept changes to your phonebook. Press A 
under OK.
6A confirmation screen displays. Press A under OK.
7Press * to return to the idle screen. 
						

							16
nextel.com
After the PIN is accepted, the phone registers on the network and the idle screen 
displays.
When the PIN security feature is disabled, the phone can be used without 
entering a PIN.
IMPORTANT: It is recommended that you enable the PIN security 
feature to protect personal data on your SIM card. This 
prevents anyone from using your phone and accessing 
your personal data.
1At the idle screen, press q and then 
press R to scroll to Settings.
2Press C under SELECT. The Settings screen displays.
3Press R to scroll to Security. Press C 
under SELECT to access the Security 
screen.
4At the Security screen, press R to scroll to SIM PIN. Press C under 
SELECT to access the SIM PIN screen. 
5Press R to scroll to On or Off. On enables the SIM PIN security 
feature; Off disables the SIM PIN security feature. Press C under 
SELECT.
6At the Verify SIM PIN Code screen, enter the current SIM PIN and 
press C under OK.
NOTE: The default SIM PIN is 0000.
      
B
          
C 
						

							17
SIM Card
Once you have enabled the SIM PIN security feature, it is recommended that 
you change your PIN to a number known only to you (see “Changing the PIN” 
on page 17).
Entering the SIM PIN
IMPORTANT: Incorrectly entering your PIN three times causes the SIM 
card to be blocked. To unblock your SIM card, you must 
contact Nextel Customer Care. For more information, 
see “Unblocking the PIN” on page 19.
If you enter an incorrect PIN, the message SIM PIN incorrect: Try again 
appears on your phone’s screen. After three consecutive incorrect attempts, the 
SIM card is blocked. Once blocked, the phone will not allow you to enter your 
PIN again, even after powering the phone off and back on. If this happens, see 
“Unblocking the PIN” on page 19.
Changing the PIN
NOTE: In order to change the PIN, the SIM PIN security feature must be 
set to On. See “Enabling/Disabling the PIN Security Feature” on 
page 15.
1From the Enter SIM PIN Code screen, 
enter your 4- to 8-digit PIN. An asterisk 
appears for each character entered. The 
default SIM PIN is 0000.
NOTE: Other than emergency dialing, 
you will be unable to use any of 
the phone functions, including 
receiving phone calls, until you 
enter the PIN.
2Press C under OK.
P 
						

							18
nextel.com
1From the idle screen, press q and then 
press R to scroll to Settings.
2Press C under SELECT. The Settings screen displays.
3Press R to scroll to Security. Press C 
under SELECT to access the Security 
screen.
4At the Security screen, press R to scroll to New Passwords. Press C 
under SELECT to access the New Passwords screen.
5At the New Passwords screen, press R to scroll to SIM PIN and press 
C under SELECT.
6At the Enter Old SIM PIN Code screen, enter the current SIM PIN 
and press C under OK.
NOTE: The default SIM PIN is 0000.
7At the Enter New SIM PIN Code screen, enter a new 4- to 8-digit SIM 
PIN and press C under OK.
8At the Re-enter New SIM PIN Code screen, re-enter the new SIM PIN 
to confirm, and press C under OK.
NOTE: The default SIM PIN is 0000.
       
B
       
C 
						

							19
SIM Card
Unblocking the PIN
If you forget your PIN and unsuccessfully enter it three times, access to your 
phone will be blocked.
NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code 
from Nextel Customer Care, then read and understand the PIN 
unblocking sequence. When entering the key press sequence, 
each key press must occur within 5 seconds of the prior key 
press.
IMPORTANT: If you unsuccessfully enter the PUK code ten times, the 
SIM card is permanently blocked and must be replaced. 
If this happens, all data will be lost. You will get a 
message to contact your service provider. Contact 
Nextel Customer Care for assistance. If the SIM card is 
blocked, the 
i60c phone only allows outgoing 
Emergency calls.
To unblock the PIN:
Inserting/Removing the SIM Card
IMPORTANT: If you remove your SIM card and insert another SIM card into your 
phone, some information does not display when you use the phone with 
the new SIM card. All Phonebook information remains stored on your 
original SIM card. The following information does not display:
IMPORTANT: Do not touch the gold-colored areas of the SIM card.
To avoid loss or damage, do not remove your SIM card from your phone 
unless absolutely necessary.
1Press * * 0 5s.
2Enter the 8-digit PUK code.
3Press s.
4Enter a new 4- to 8-digit SIM PIN and press s. 
5Re-enter your SIM PIN and press s. 
If you entered the codes properly, the SIM Unlocked screen displays.
  Recent Calls list  Call Forwarding settings
  Net Alert notifications  Information stored in Memo
  Browser Bookmarks 
						

							20
nextel.com
Inserting SIM Card
1With the phone powered off, remove the battery cover and battery. See 
“Detaching the Battery” on page 10.
2With the antenna facing away from you 
and the back of the phone exposed and 
facing up, locate the SIM card holder.
3Hold the SIM card with the gold contact 
side facing down and the cut corner in the 
lower left. Do not touch the gold-colored 
areas of the SIM card.
SIM card 
holder
cut corner 
						

							21
SIM Card
Removing SIM Card
NOTE: To remove your SIM card, you will need a ballpoint pen.
4Carefully slide the SIM card to the right and into 
the phone, until it lies flat in the SIM card holder.
1With the phone powered off, remove the battery cover and battery. See 
“Detaching the Battery” on page 10.
2With the antenna facing away from you 
and the back of the phone exposed and 
facing up, insert the tip of a ballpoint pen 
into the slot to the right of the SIM card, 
along the right edge of the SIM card. 
slot 
						

							22
nextel.com
3With your other hand, gently press the 
PUSH tab to the left of the SIM card. Hold 
this tab down. 
4While holding the tab down, slide the SIM card to the left by moving 
the ballpoint pen to the left within the slot. 
5When the ballpoint pen has moved the SIM card to the left as far as 
possible, very carefully lift the SIM card out of the phone. Do not touch 
the gold-colored areas of the SIM card. 
NOTE: Protect the SIM card as you would any delicate object. When 
the SIM card is not in the phone, you should store it in 
something protective, such as a mailing envelope.
tab