Motorola I530 User Guide

							 13
 SIM Card Security
Turning the PIN Requirement On and 
OffWhen the SIM PIN requirement is off, your phone 
can be used without entering a PIN.Important:  When the SIM PIN requirement is off, the 
personal data on your SIM card is not 
protected. Anyone can use your phone 
and access your personal data.When the SIM PIN requirement is on, you are 
prompted to enter your PIN each time you power on 
your phone.
Note:If a SIM PIN is required, your phone will not 
function until the SIM PIN is entered, 
except for making emergency calls.
1From the main menu, select Settings > Security 
> SIM PIN.
2Scroll to On or Off.
3Press A under Select.
4Enter the current SIM PIN.
Note:When you receive your phone, the SIM PIN 
is 0000. Change your PIN to prevent 
fraudulent use of the SIM card (see 
“Changing the PIN”).
5Press A under Ok.
Entering the PIN1When the Enter SIM PIN Code screen appears 
after you power on your phone, enter your SIM 
PIN.
2Press A under Ok.
The message SIM Unlocked displays.Important:  If you enter your PIN incorrectly 3 times, 
your SIM card is blocked. To unblock 
your SIM card, you must contact Nextel 
Customer Care. See “Unblocking the 
PIN”.Changing the PINNote:The SIM PIN requirement must be turned 
on in order to access this feature.
1From the main menu, select Settings > Security 
> Change Password > SIM PIN.
2At the Enter Old SIM PIN Code screen, enter the 
current SIM PIN.
3Press A under Ok.
4At the Enter New SIM PIN Code screen, enter 
the new 4- to 8-digit SIM PIN.
5Press A under Ok.
6At the Re-enter New SIM PIN Code screen, 
re-enter the new SIM PIN to confirm.
7Press A under Ok. 
						

							14Getting Started
Changed: SIM PIN displays.Unblocking the PINIf you enter your PIN incorrectly three times, your 
SIM card is blocked. To unblock your SIM card, you 
must contact Nextel Customer Care to get a PIN 
Unblock Code (PUK).Important:   If you unsuccessfully enter the PUK code 
10 times, your SIM card is permanently 
blocked and must be replaced. If this 
happens, all data is lost. You will get a 
message to contact Nextel Customer 
Care. Except for making emergency 
calls, your phone will not function with a 
blocked SIM card.To unblock the PIN:
1Press * # m 1.
2At your Nextel Customer Care representative’s 
request, provide the information needed to give 
you a PUK code.
3Select Unblock PIN.
4Enter the PUK code.
5Enter a new 4- to 8-digit SIM PIN.
6Re-enter your SIM PIN. 
Note:These steps must be performed in quick 
succession.If you entered the codes properly, SIM Unlocked 
appears on the display.
Inserting and Removing Your SIM CardImportant:  Do not touch the gold-colored areas of 
your SIM card.The SIM card is designed for optimal Contacts 
storage and feature use. For Nextel SIM card 
compatibility information, visit www.nextel.com/sim.
If you remove your SIM card and use it with another 
phone, or use another SIM card with your phone, 
the following information is erased:
The recent calls list
Call forwarding settings
Net alerts
Information stored in Memo
3 most recent GPS Enabled locations
Voice records*
Vo i c e  n a m e s *
Note:In some cases, Contacts may not be 
accessible if you move your SIM card to 
another phone. Contacts entries created 
with your i530 phone are not readable by 
an older iDEN SIM-based phone.
* See “Optional Features” on page 89. 
						

							 15
 Locking the Keypad
Inserting Your SIM Card
1With your phone powered off, remove the battery 
door and battery.
2Hold your SIM card as shown.
3Carefully slide your SIM card into your phone until 
it lines up with the marks above and below the 
SIM card holder.Removing Your SIM Card
Important:  To avoid loss or damage, do not remove 
your SIM card from your phone unless 
absolutely necessary.1With your phone powered off, remove the battery 
door and battery.
2Slide your SIM card out of the SIM card holder.
Note:Protect your SIM card as you would any 
delicate object. Store it carefully.Locking the KeypadLocking the phone’s keypad prevents its buttons 
from being pressed. When the keypad is locked, you 
can only:
Power the phone on and off
cut corner
SIM card 
holder
SIM card 
holder 
						

							16Getting Started
Unlock the keypad
Respond to incoming calls, messages, and alertsImportant:  Emergency calls cannot be placed while 
the keypad is locked.To lock the keypad:
1From the idle screen, press m.
2Press *.
If you press a key while the keypad is locked, 
instructions for unlocking the keypad display briefly.
To unlock the keypad:
1From the idle screen, press m.
2Press *.
While the keypad is locked, you can respond to 
incoming calls, messages, and alerts just as you do 
when the keypad is not locked. When finished, press 
e to return to the idle screen. The keypad remains 
locked.
You also have the option of setting your phone to 
automatically lock the keypad if there has been no 
activity for a specified time.
1From the main menu, select Settings > Security 
> Keypad Lock.
2To lock the keypad immediately, select Lock 
Now. You will be given the option to press m and 
* to lock and unlock the keypad.3To set a specific time for the keypad to lock if 
there has been no activity, select Auto Lock and 
press A under Change.
The keypad can be set to lock in 5, 10, 15 or 20 
minutes if the keypad is not touched during the 
specified time. To turn the auto lock off, repeat step 
3 and select Off.
AccessoriesYour phone comes with a Standard Lithium Ion 
Battery and standard travel charger.
Various accessories are available for use with your 
i530 phone, including vehicle power charger, 
holsters and cases, batteries, Hands-Free 
accessories and more.
To order additional accessories, go to 
www.nextel.com or call 1-800-Nextel6. You can also 
contact your Nextel Authorized Sales 
Representative or stop by any Nextel-owned Retail 
Store. For information on Nextel retail store 
locations, go to www.nextel.com. 
						

							 17
 Wireless Local Number Portability: Bringing Your Phone Number From Another Carrier
Wireless Local Number 
Portability:  Bringing Your 
Phone Number From Another 
CarrierIf you are bringing your phone number from another 
carrier, there is additional information about certain 
features on your Nextel phone that you need to be 
aware of.  911If you are bringing your phone number to Nextel 
from your previous carrier, you may receive a 
temporary telephone number while your Nextel 
phone is being programmed with your permanent 
phone number. If you make a call to 911 and the call 
fails, the 911 emergency response center will not be 
able to call you back on your Nextel phone if in the 
meantime, your Nextel phone has been 
programmed with your permanent telephone 
number.  If the call is disconnected before location 
and details have been provided, call 911 again and 
advise that you were disconnected.
Voice MailIt is recommended that you do not activate your 
Nextel voice mail until your permanent number has 
been activated on your Nextel phone.  Messages left 
in your Nextel voice mail box will be lost after your 
permanent number has been activated on your 
Nextel phone.
Go to www.nextel.com/WLNP for more details.Nextel
® Customer Care
Nextel Customer Care: 1-800-639-6111 or dial 611 
from your i530 phone.
Nextel Worldwide Customer Care: +1-360-662-5202 
(toll-free from your i530 phone). 
						

							18Getting Started
i530 Phone Menu Tree 

 Recent Calls   
 
Recent Calls (if any)
     
 
Store
     
 
View
     
 
Delete
     
 
Delete All
     
 
Call Alert  Queue
     
 
Call Setup

 Call Alert   
 
Call Alerts (if any)
     
 
View
     
     
 
Store
     
 
Delete
     
 
Delete All
     
 
Sort By
     
 
Recent Calls



 Net

 Settings   
 
Display/Info
   
 
Phone Calls
   
 
DC/GC Options
   
 
Volume
   
 
Security
   
 
Advanced

 Ring Tones   
 
VibeAll On/Off
   
 
Available Ring Tones
   
 
Vibrate
         
   Silent
              
    Assign w/vibe
              
  
Overview
              

  
Memory Usage
              

  
Delete

 My Info   
 
Name
   
 
Line 1
         
 Line 2
   
 
Direct Connect
   
 
Group ID
   
   
 
Carrier IP
   
 
IP1 Address
   
 
IP2 Address
   
 
CKT
   
 
Service Status

 Downloads

 GPS   
 
Position
   
 
Privacy
   
 
Interface

 Contacts   
 
[New Contact]
               
 New
     
 
Search
     
 
Capacity
               
 Filter
               
 Call Setup
   
 
Contacts (if any)
     
 
View
     
 
New
               
 Search
     
 
Edit
     
 
Delete Contact
     
 
Delete Number
     
 
Capacity
     
 
Filter
     
 
Call Setup
    

 Messages   
 
Voice Mail
   
 
Text Msgs
     
 
Memory Meter
   
 
Net Alert

 Call Forward   
 
All Calls 
   
 - To
       

  Retrieve Status
         

   Detailed
  - If Busy
                 - If No Answer
  - If Unreachable
       

  Retrieve Status

 Memo   
 
Store
   
 
Cancel
   
 
Delete

 Call Timers   
 
Last Call
   
 
Phone Reset
   
 
Phone Lifetime
   
 
DC/GC Reset
   
 
DC/GC Lifetime
   
 
Circuit Reset
   
 
Circuit Lifetime
   
 
Kbytes Reset
    
						

							 19
Making CallsYour i530 phone makes 2 types of calls: digital 
cellular phone calls and Direct Connect calls. With 
Direct Connect calls, you use your phone as a 
long-range, digital walkie-talkie.Phone Calls1Enter the number you want to call.
2To place the call, press s.
3To end the call:
Press e. -or-
Close the flip.
To end a call by closing the flip, you must have the 
Flip to End feature turned on (see “Setting Flip 
Actions” on page 78).Direct Connect
TM
 Calls
1Enter the Direct Connect number you want to call.
2Press and hold the PTT button on the side of your 
phone. Begin talking after your phone emits a 
chirping sound.
3Release the PTT button to listen.Tip:To let someone know you want to talk to him 
or her on a Direct Connect call, send a call 
alert. See “Call Alerts” on page 25.
Dialing Direct Connect
TM Numbers
Every Direct Connect number has 3 parts — an area 
ID, a network ID, and a member ID — with an 
asterisk between each of these parts. For example: 
999*999*9999.
When you place a Direct Connect call in, you must 
enter the whole Direct Connect number including 
the asterisks.
Ti p:When you store a Direct Connect number in 
Contacts it is good practice to include the 
whole Direct Connect number including the 
asterisks in case you travel with your phone, 
or another Direct Connect user whom you 
are trying to reach travels with their phone, 
outside of your network.Receiving CallsPhone CallsWhen you receive a phone call, your phone rings, 
vibrates, or lights up its backlight.
Answering
If the flip is closed, press t. -or- 
						

							20Making Calls
Open the flip. -or-
Press s. -or-
Press A under Ye s. -or-
Press any number key.
To answer a call by opening the flip, you must have 
the Flip to Ans feature turned on (see “Setting Flip 
Actions” on page 78). To answer a call by pressing 
any number key, you must have the Any Key Ans 
feature turned on (see “Phone Calls Features” on 
page 87).
Sending to Voice Mail
If the flip is closed, press .. -or-
Press e. -or-
Press A under No.
 Ending
If the flip is closed, press .. -or-
Press e. -or-
Close the flip.Direct Connect
TM Calls
When you receive a Direct Connect call, your phone 
emits a chirping sound or vibrates.
1Wait for the caller to finish speaking.2Press and hold the PTT button on the side of your 
phone. Begin talking after your phone emits a 
chirping sound or vibrates.
3Release the PTT button to listen.
Call IconsWhen you make a call, call icons appear in the text 
area of the phone’s display.
When you miss a call, this icon appears in the text 
area:Ways to Enter a NumberTo enter the number you want to call, you can:
Use the numbers on the keypad
Select the number from the recent calls list XPlacing a phone call.
WReceiving a phone call.
YPhone call is active.
ZPhone call is on hold.
UPhone call ended.
VYou missed a phone call. 
						

							 21
 Ways to Enter a Number
Select the number from Contacts
Use One Touch Direct Connect to make a Direct 
Connect call
Redial the last phone number called 
Use Speed Dial or Turbo Dial
®
Use a TTY device — see “Making TTY Calls” on 
page 81From the KeypadTo enter the number you want to call, press the 
numbers on the keypad.
If you make a mistake:
To clear a digit, press A under Delete.
To clear all digits, press and hold A under Delete.
To insert or delete a digit anywhere in the string of 
digits you have entered, scroll left or right.
To cancel, press e.From the Recent Calls ListThe recent calls list stores the last 20 calls you 
made or received.
To select a number from the recent calls list as the 
number you want to call:
1From the idle screen, scroll down. -or-From the main menu, select Recent Calls.
2Scroll to the name or number you want to call.
From ContactsIf you have numbers stored in Contacts, you can 
use these numbers to make calls. For information on 
entering numbers into Contacts, see “Creating 
Entries” on page 37.
Calling from the Contacts List
1From the main menu, select Contacts.
2Scroll to the name or number you want to call.
Ti p:To find Contacts entries faster, use the 
keypad to enter the first letter of the name.
3Place the call now. -or-
Scroll left or right to display the Contacts type for 
the number you want to call.
If you are making a Direct Connect call, your phone 
places the call to the Direct Connect number stored 
in the Contacts entry, even if the Direct Connect 
icon is not displayed.
If you are making a phone call:
Your phone places the call to the phone number 
assigned to the Contacts type displayed. 
						

							22Making Calls
If the Contacts type displayed is not a phone 
number, your phone places the call to the phone 
number stored in the Contacts entry.
If the Contacts type displayed is not a phone 
number and you have more than one phone 
number stored in the Contacts entry, your phone 
prompts you to select the phone number you want 
to place the call to.
Calling from a Contacts Entry
1From the main menu, select Contacts.
2Scroll to the name or number you want to call.
3Press A under View. -or-
If Vi ew is not one of your options: Press m. Select 
View.
4Place the call now. -or-
Scroll to view more numbers. When you place the 
call, it is made to the number displayed.Using One Touch Direct Connect
TM
One Touch Direct Connect sets your phone to call 
the most recent Direct Connect number on the 
recent calls list, or to a Direct Connect number you 
choose, every time you press the PTT button. See 
“Setting One Touch Direct Connect” on page 77.
Redialing the Last NumberPress and hold s to place a call to the last phone 
number you called.Using Speed Dial and Turbo Dial
®
Each phone number stored in Contacts is assigned 
a Speed Dial number which you can use to call that 
number.
Speed Dial
1From the idle screen, use the keypad to enter the 
Speed Dial number assigned to the phone 
number you want to call.
2Press #.
3Press s.
Turbo Dial
From the idle screen, press and hold the Speed 
Dial number (1 through 9) assigned to the phone 
number you want to call.Using SpeakerphoneTurning on speakerphone makes incoming sound 
come out of the phone’s speaker instead of the 
earpiece. Speakerphone is available whenever you 
are on an active phone call.