Mitel SX 200 ML PABX Instructions Guide
Here you can view all the pages of manual Mitel SX 200 ML PABX Instructions Guide. The Mitel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 521
Loss and Level Plan Table 8-3 Conferencing Loss Plan (continued) Originating Circuit Connecting Circuit Loss (ctB) TX Direction Loss (dB) Rx Direction Dl-l- -3.0 -9.0 sATT -3.0 -3.0 sDTT -3.0 -3.0 SCTT -3.0 -9.0 sATT -3.2 -3.2 sDTT -3.2 -3.2 SCTT -3.2 -9.2 ONS(D) -6.0 -6.0 OPSS OPSS -6.0 -6.0 OPSL -3.0 -3.0 ACO(D) -4.0 -4.0 AJ-W’I -5.0 -5.0 ATO( D) -6.0 -6.0 DC0 -3.0 -3.0 DTO -3.0 -9.0 DlT -3.0 -9.0 sATT -3.0 -3.0 SD-IT -3.0 -3.0 SC-l-r -3.0 -9.0 ONS(D) -3.0 -3.0 OPSL OPSL 0 0...
Page 522
Engineering Information Table 8-3 Conferencing Loss Plan (continued) Originating Circuit AT-WI ATO sATT Connecting Circuit Loss (d6) TX Direction Loss (dB) Rx Direction ATO( D) -4.0 -4.0 DC0 -1 .o -1 .o DTO -1 .o -7.0 D-i-r -1 .o -7.0 sATT -1 .o -1 .o SDTT -1 .o -1 .o scl-r -1 .o -7.ci ONS(D) -5.0 -5.0 OPSS -5.0 -5.0 OPSL -2.0 -2.0 AT-W) -4.0 -4.0 ACO( D) -3.0 -3.0 ATO( D) -5.0 -5.0 DC0 -2.0 -2.0 DTO -2.0 -8.0 D-l-r -2.0 -8.0 sATT -2.0 -2.0 sDTT -2.0 -2.0 SCTT -2.0 -8.0 ONS(D)...
Page 523
Loss and Level Plan Table 8-3 Conferencing Loss Plan (continued) Originating Circuit Connecting Circuit Loss (dB) TX Direction Loss (dB) Rx Direction ATO( D) -3.0 -3.0 DC0 0 0 DTO 0 -6.0 Dll- 0 -6.0 sA-IT 0 0 sDTT 0 0 SCTT 0 -6.0 ONS(D) -3.0 -3.0 sDTT OPSS -3.0 -3.0 OPSL 0 0 ACO(D) -1 .o -1 .o A-WV -2.0 -2.0 ATO( D) -3.0 -3.0 DC0 0 0 DTO 0 -6.0 Dll- 0 -6.0 sATT 0 0 sDTT 0 0 SCTT -6-O -6.0 ONS(D) -9,o -3.0 SC-i-r OPSS -9.0 -3.0 OPSL -6.0 0 ACO(D) -7,o -1 .o AT(D) -8.0 -2.0...
Page 524
Engineering Information Table 8-3 Conferencing Loss Plan (continued) Originating Circuit Connecting Circuit Loss (dB) TX Direction Loss (dB) Rx Direction ATO( D) -3.0 -3.0 DC0 0 0 DTO 0 -6.0 D-IT 0 -6.0 sAll- 0 0 sDTT 0 0 SCTT 0 -6.0 ONS(D) -9.0 -3.0 D-I-0 OPSS -9.0 -3.0 OPSL -6.0 0 ACO(D) -7.0 -1 .o AJ-W) -8.0 -2.0 ATO( D) -9.0 -3.0 DC0 -6.0 0 DTO -6.0 -6.0 D-I-F -6.0 -6.0 sA-IT -6.0 0 sDTT -6.0 0 SC-l-r -6.0 -6.0 ONS(D) -9.0 -3.0 D-i-r OPSS -9.0 -3.0 OPSL -6.0 0 ACO(D) -7.0...
Page 525
Loss and Level Plan Tone Levels 8.4 All of the tones used by the PABX are provided by the Digital Signal Processor on the Main Control Card. The system provides eight tone channels, each of which can generate either a dual or single frequency tone. One channel is used to generate a signal which controls the frequency and amplitude of the ringing generator output. Three channels are used for DTMF tone generation, and the remaining four are used to generate the system call progress tones. Most call...
Page 527
9 Call Progress Tones and Ringing Cadences This Part describes the different call progress tones and ringing cadences that are available to support PABX requirements. North America Tone Plan 9.1 Table 9-l identifies the tones that are generated by the PABX in North America. Table 9-l North America Tone Generation Table Tone Frequency 1 Frequency 2 Level With No Interface Gain/Loss Ringing 20 Hz --- 90 Vrms Dial tone 350 Hz 440 Hz -10.75 dBm0 Busy tone 480 Hz 620 Hz -20.00 dBm0 Ringback...
Page 528
Engineering Information Table 9-2 North America Digital Bay Ringer Caclencing Discriminating Ring (Option 17) enabled and Discriminating Ring Always (Option 18) disabled ONS/OPS Internal (standard) .9 on 3.1 off repeating Mexico ONS/OPS External (discriminating) .350 on .200 off .350 on 3.1 off repeating SUPERSET Telephones Internal (standard) 1 on 3 off repeating SUPERSET Telephones External (discriminating) .400 on .200 off .400 on 3.0 off repeating Tone Plan 9.2 Table 9-3...
Page 529
Call Progress Tones and Ringing Cadences Ringer Cadencing Table 9-4 identifies the ringer cadencing that is provided by the PABX in Mexico. Table 9-4 Mexico Digital Bay Ringer Cadencing Discriminating Ring (Option 17) enabled and Discriminating Ring Always (Option 18) disabled ONS/OPS ONS/OPS SUPERSET SUPERSET Internal (standard) External Telephones Telephones (discriminating) Internal (standard) External (discriminating) .9 on 4.1 off .350 on .200 off 1 on 4 off .400 on .200 off repeating...
Page 530
Engineering Information Ringer Cadencing Table 9-6 identifies the ringer cadencing that is provided by the PABX in Hong Kong and Taiwan. Table 9-6 Hong Kong / Taiwan Digital Bay Ringer Cadencing Discriminating Ring (Option 17) enabled and Discriminating Ring Always (Option 18) disabled ONS/OPS internal (standard) .9 on 3.1 off repeating Malaysia ONWOPS External (discriminating) .350 on .200 off .350 on 3.1 off repeating SUPERSET Telephones Internal (standard) 1 on 3 off repeating...