Minolta Di450 User Manual

6-14
When a Message Appears
Chapter 6
4. When the Message “Misfeed detected.” Appears
Misfeed Location Displays
Different procedures are used to clear a misfed sheet of paper depending on the location. First, isolate the
location, then clear the misfeed according to the procedure applicable to the misfeed occurring at that
particular location.
A blinking dot “ ” indicates that there is a misfeed at that location. A lit dot “ ” indicates that there
might be a sheet of paper stopped at that location....

6-15
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Machine p. 6-16
Duplex Unit p. 6-20
Electronic Document Handler p. 6-22
Finisher FN-105 p. 6-32
Mailbin Finisherp. 6-34
4002P191AC
4002P192AB
4002P194AB
4002P196AC
4002P197AB
Paper Feed Cabinet p. 6-18
Intelligent Multi Bypass Tray p. 6-21
Finisher FN-5 p. 6-24
Finisher FN-106 p. 6-32
Large Capacity Cassette p. 6-36
4002P258AA
4002P193AB
4002P195AB
4002P196AC
4002P198AB
Downloaded From ManualsPrinter.com Manuals 

6-16
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Misfeed Clearing Procedures
Remove the papers from the Exit Tray and
open the Front Door.
Open Upper Left Door [L1].
Turning Misfeed Removal Knob [M1], pull
out the sheet of paper.Opening Misfeed Clearing Guide [M2],
remove the sheet of paper.
Close Upper Left Door [L1] and reinstall the
Exit Tray.
Open Middle Left Door [L2].
Pull out the sheet of paper. Then, close
Middle Left Door [L2].
Machine
CAUTION
The area around...

6-17
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Pull down Transport Section Release Lever
[M3] to the front.
Remove the sheet of paper.
Push Transport Section Release Lever [M3]
back into the original position and close the
Front Door.
Open Upper Right Door [R1].Pull out the sheet of paper from the Paper
Take-up Section. Then, close the Upper
Right Door [R1].
Slide out the drawer being used and take out
the paper stack left in it.
Reload the paper stack in the drawer...

6-18
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Lower Right Door [R2].
Pull out the sheet of paper from the Paper
Take-up Section. Then, close Lower Right
Door [R2].
Slide out the drawer being used and take out
the paper stack left in it.
Reload the paper stack in the drawer and
slide the drawer back into the machine.To reset the paper misfeed indication on the
Touch Panel, open and close the Front Door.
2Way Paper Feed Cabinet
1
4002O274AA
R2
2
4002O275AA
R2
3...

6-19
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Lower Right Door [R2].
Pull out the sheet of paper from the Paper
Take-up Section. Then, close Lower Right
Door [R2].
Press the Paper Descent key and then slide
the drawer out.
Take out the paper stack left in the drawer.Reload the paper stack in the drawer and
slide the drawer back into the machine.
To reset the paper misfeed indication on the
Touch Panel, open and close the Front Door.
Large Capacity Cabinet
1...

6-20
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Open Middle Left Door [L2] and Lower Left
Door [L3].
Pull out the sheet of paper. Then, close
Middle Left Door [L2] and Lower Left Door
[L3].
Open Lower Right Door [R2].
Pull out the sheet of paper from the Paper
Take-up Section. Then, close Lower Right
Door [R2].Slide out Duplex Unit.
Open Misfeed Clearing Guide [D] and
remove the sheet of paper.
Close Misfeed Clearing Guide [D] and slide
the Duplex Unit back into the...

6-21
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Remove the paper stack from the Intelligent
Multi Bypass Tray and open Upper Right
Door [R1].
Pull out the sheet of paper from the Paper
Take-Up Section. Then, close Upper Right
Door [R1].
Reload the paper stack back on the tray.
To reset the paper misfeed indication on the
Touch Panel, open and close the Front Door.
Intelligent Multi Bypass Tray
1
4002O219AB
R1
2
4002O220AA
R1
3
4002O221AB
4
4002O206AC
Downloaded From...

6-22
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Remove the originals from the Document
Handling Tray.
Open Misfeed Clearing Guide [F1].
Open Misfeed Clearing Guide [F2] and
gently pull out the original.
Pull up Document Handling Tray [F3] until a
click is heard and then gently pull out the
original.Open Misfeed Clearing Tray [F4] and then
gently pull out the original.
Pinching the lever on Document Handling
Tray [F3], bring the tray back down.
Raise the Electronic...

6-23
4. When the Message “Misfeed detected.” Appears
When a Message Appears
Chapter 6
Opening [F6] Lever, gently pull out the
original.
Lower the Electronic Document Handler.
Close Misfeed Clearing Guides [F1] and
[F2].
Reload the originals as instructed on the
Touch Panel.9
4002O230AB
F6
10
4002O231AC
11
4002O232AC
F1
F2
12
4002O233AC
Downloaded From ManualsPrinter.com Manuals