Miele Wt 2679 I Wpm Operating Instructions

							Lock
The system lock prevents your
machine being used without your
knowledge.
When the system lock has been
activated, you have to enter a code after
switching the machine on. Otherwise
the machine cannot be operated.
To activate the lock
CBackA
XActivate
^SelectActivateand confirm your
selection.
^The display will now request that a
code is entered. The code is125and
cannot be altered.
To enter the lock code
The code is:125
0__
Enter code
^
Use the+button to enter the first
number. Confirm your selection of this
number by pressing theOKbutton.
Now set the second number.
^
Repeat the process until all three
numbers have been entered.^After the last number has been
entered, press theOKbutton.
Yes125No
Confirm code
^Confirm the code with theOKbutton
or if you want to correct a mistake,
press the–button.
^The lock will now be activated when
the machine is switched off.
To unlock the washer-dryer
When the machine is switched on
again, the display will request the lock
code.
^Enter lock code 125 as described
above and confirm the entry.
W
Entry OK
Lock deactivated
The machine is now unlocked.
To deactivate the lock
Proceed as for activating the lock.
Settings menuJ
81
 
						

							Temperature
You can choose for the temperature
to be displayed as°C/Celsiusor
°F/Fahrenheit.
A tick will appear beside the option to
show that it has been set.
^Select the option you want and
confirm your selection.
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are two volumes.
Normal
(the machine is delivered with
this option selected)
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
Loud
The buzzer sounds at maximum volume
at the end of a programme or when
Rinse hold is reached.
A tick will appear beside the option to
show that it has been set.
^
Select the option you want and
confirm your selection.
Keypad tones
An audible tone sounds each time a
button is pressed.
The machine is delivered with the
keypad tone switched off.
A tick will appear beside the option to
show that it has been set.
Display contrast
There are ten different display
contrast settings.
The machine is delivered with the
display contrast on setting 5.
The display contrast will change as
soon as a different setting is chosen.
^Set the display contrast you require.
Display brightness
There are ten different display
brightness settings.
The machine is delivered with the
display brightness on setting 5.
The display brightness will change as
soon as a different setting is chosen.
^
Set the display brightness you
require.
Settings menuJ
82
 
						

							Standby
To save energy, the display goes out
after 10 minutes and the indicator
light for theStart/Stopbutton will start
flashing slowly.
There are two options:
On
Standby is activated:
–if a programme is not selected after
the machine has been switched on.
–after a programme has started.
– at the end of a programme.
Not in current Prog.
(the machine is
delivered with this option selected)
Standby is activated:
– if a programme is not selected after
the machine has been switched on.
– at the end of a programme.
Pressing one of the buttons switches
the display back on again.
A tick will appear beside the option to
show that it has been set.
Memory
If an extra option has been selected
for a programme, or the
recommended spin speed has been
altered, the machine will store the
changes in memory at the start of a
programme.
When this programme is chosen again
these settings will appear in the display.
The machine is delivered with the
memory function deactivated.
A tick will appear beside the option to
show that it has been set.
Set extended cool-down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The cooling down phase can be
lengthened from 0 min (standard
cooling down phase = default setting)
to 18 minutes.
The programme duration will increase
accordingly.
To close the Settings menu
CBackA
LanguageF
Time...H
^
SelectBackand confirm your
selection.
Settings menuJ
83
 
						

							Alteration rights reserved/2208M.-Nr. 06 533 690 / 02