Miele Wt 2679 I Wpm Operating Instructions

							Control panel
aStart/Stopbutton
For starting the programme selected
and cancelling a programme once it
has started.
bDisplay with–,OK,+and
Load/Detergentbuttons
See the following page for more
details.
cmbutton
For selecting delay start and
setting the time of day.
dPC / Optical interface
This is used by service technicians to
run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
eExtra optionbuttons
with indicator lights
Various extra options can be added
to the programmes.fProgramme selector
For selecting washing and drying
programmes. The programme
selector can be turned clockwise or
anti-clockwise.
gWashing/Dryingbutton
for selecting:
– Washing
– Drying
– WashingandDrying.
hI-On/0-Offbutton
For switching the washer-dryer on
and off.
iDoorbutton
Opens the machine door.
Guide to the machine
11
 
						

							Display
When a programme is selected the
display can be used to select and
change programme parameters.
- / + buttons
For altering the parameters highlighted
in the display:
-decreases the parameter or moves
the highlighting upwards
+increases the parameter or moves
the highlighting downwards.
OK button
For confirming the parameter selected
and choosing the next parameter.
Load/Detergentbutton
For calling up the load size and the
detergent amount.With the programme selector at the
Further programmesposition, you can
select the following programmes via the
display:Dark garments,Shirts,Denim,
Sportswear,Outerwear,Proofing,
Curtains,Separate rinseandStarch.
Delay start and the soak time are
selected via the display.
The display shows the duration of the
programmes and the current time of
day.
TheSettingsJmenu is also operated
via the display.
Use
This washer-dryer can be used:
–to wash separately
max. load 5 kg (depending on
programme);
–to dry separately
max. load 2.5 kg (depending on
programme);
or
–
to wash and dry in a continuous
sequence
max. load 2.5 kg (depending on
programme).
Guide to the machine
12
 
						

							Before using the machine for the first
time ensure that it is correctly
installed and connected. See
Installation and connection. Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
The washer-dryer has a sensor which
measures the amount of laundry in the
drum. This determines the amount of
detergent required. To allow the load
size indicator to function correctly, you
must first run a wash programme
without any laundry
and without
detergent.
^Open the stopcock.
^Press theI-On/0-Offbutton in.
If the washer-dryer is being switched on
for the first time, the welcome screen
will appear.
M
Willkommen
The welcome screen will not appear
again once a programme lasting
longer than 1 hour has been
completed.
After a few seconds the display will
change to show the screen for selecting
your language.Setting the language
Cèeština
Fdansk
deutsch
H
^Use the–and+buttons to select the
language you want and confirm your
selection by pressing theOKbutton.
Setting the time of day
The display for setting the time will
appear.
12:00
Set the time
^Set the hour with the–and+buttons
and confirm your setting by pressing
theOKbutton. Now set the minutes.
After you have confirmed the minute
setting, the display will change to
show the reminder to remove the
transport struts.
Before using for the first time
13
 
						

							Reminder to remove transport struts
To avoid the risk of damage, the
transport struts must be removed
before the washer-dryer is used for
the first time. See Installation and
connection for instructions on how
to do this.
i
Remove transport
struts
OK
^After removing the transport struts (if
this has not already been done by
your fitter) press theOKbutton.
Running your first programme
Your washer-dryer is now ready for the
first programme to be run.
15:00
Select programme
^
Turn the programme selector to the
Cottonsposition.
^
Press theStart/Stopbutton.
^
When the programme has finished,
turn the programme selector toStop
and switch off the washer-dryer.
The load sensor must then be
calibrated to zero as you would with
bathroom scales.Calibrating the load size sensor to
zero
^Switch the machine on.
^Open the drum door.
^Turn the programme selector to the
Cottonsposition.
^Press and hold theLoad/Detergent
button pressed in until the following
message appears in the display:
i
Zero setting
OK
^Turn the programme selector toStop
and switch off the washer-dryer.
The machine is now ready for use.
Before using for the first time
14
 
						

							Energy and water consumption
–Water consumption and energy
usage are determined by the size of
the load.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
–Use theAutomaticandExpress
programmes for small loads.
–When smaller amounts of laundry are
washed using theCottons
programmes, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the
programme duration is adjusted
during the course of the wash
programme.
– Using theCottons60°C programme
instead of theCottons95°C
programme will give energy savings
of between 35% and 45%. This is
sufficient for most levels of soiling.
For stubborn or old stains, use the
Soakextra option.Detergent
–Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
–Reduce the amount of detergent for
smaller loads. Use theLoad/
Detergentbutton.
Choosing the correct extra option
(Pre-wash, Soak, Short)
Select:
A wash programme together with the
Shortextra option for light to normal
soilingwhere there are no obvious
marks.
A wash programme without any extra
options for normal to heavy soiling
.
A wash programme together with the
Soakoption for heavily soiled
laundry.
– Use the extra optionSoakinstead of
Pre-wash. If Soak is followed immedi-
ately by a main wash, the same suds
are used.
When drying straight afterwards
–
Select a high spin speed for the
wash programme, as well as for the
Thermospin, if tumble drying this
laundry afterwards. This saves time
and energy.
Washing and drying environmentally
15
 
						

							Brief instructions
The headings numberedA,B,C,...
show the operating sequence and can
be used as brief instructions.
Separate washing
ASort the laundry
^Empty all pockets.
,Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and components in the
machine.
^
Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturers
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
,Do not use solvent-based
cleaning agents in this machine.^Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in a
mixed load. Always wash whites and
coloureds separately.
–Curtains: Remove lead weights first
or place in a laundry bag.
–Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
– Knitted garments, trousers and jeans,
T-shirts and sweat shirts: Turn inside
out, if recommended by the
manufacturer.
– Close any zips, fasten hooks and
eyes etc before washing.
– Fasten duvet covers and pillow cases
to prevent small items from being
trapped inside them.
Do not wash any items in this machine
which are specified by the
manufacturer asnon-machine
washableon the care label. (h
symbol)
WASHING
16
 
						

							BSwitch the machine on
The interior drum lighting will come on.
CSelect a programme
^Select the programme you want.
The programme selected will appear in
the display.
Minimum iron
Further programmes:
When you turn the programme selector
toFurther programmes, a list of these
programmes will appear in the display.
EDark garments
Denim
ShirtsH
^Use the-or+button to highlight the
programme you wish to select and
confirm your selection by pressing
theOKbutton.
Wait until the display switches to show
the menu for the programme selected.
40°C900 rpm
Duration:1:00h
or
Denim
40°C900 rpm
Duration:1:00h
^Press theWashing/Dryingbutton
repeatedly untilonlythe Washing
indicator light is lit up.
TheDryingindicator light must not
be lit up as well as this would mean
that the washing programme would
be followed immediately by the
drying programme.
^
You can alter the highlighted
temperature with the-or+buttons.
Press theOKbutton to confirm the
temperature you want and move on to
the spin speed.
30°C900 rpm
Duration0:57h
^
You can then alter the highlighted
spin speed, selectrinse holdor
without spinwith the-or+buttons.
WASHING
17
 
						

							^You can select any extras options
with the extra option buttons.
^Each press of the top right hand
button selects the extra option in the
following order:Pre-washor
Soakor
no option is selected.
Not all the extra options are suitable for
use with every wash programme.
You can only select extra options which
are compatible with the basic
programme being used.
TheLow temperatureextra only
applies to drying.
^
Select Delay start, if required.DLoad the drum
^Press theDoorbutton to open the
drum door.
The load size indicator display will
appear.
Load 
						

							EAdd detergent
The load size indicator display will be
replaced with the detergent percentage
display.
Detergent 75%
A
40%Add slightly less than half the
amount recommended . . .
50%Add half the amount
recommended . . .
60%Add slightly more than half the
amount recommended . . .
75%Add three quarters of the
amount recommended . . .
100%Add the full amount
You also need to take the level of soiling
and water hardness into account.
too little detergent results in:
–
Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
–
Greasy particles clinging to the
laundry.
–
Limescale deposits on the heater
elements.
too much detergent results in:
–
Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.–High water consumption (an
additional rinse cycle will
automatically switch in).
–A burden to the environment.
^Pull out the detergent drawer and add
detergent to the compartments as
follows:
i= Detergent for the pre-wash
(
1/4of the total amount
recommended). This
compartment is also used for
starch formulations when
starching separately.
j= Detergent for the main wash
including Soak
§= Fabric conditioner or liquid
starch
^
Close the detergent drawer.
See Detergent for further information.
WASHING
19
 
						

							FStart the programme
^Press the flashingStart/Stopbutton.
The estimated programme duration will
count down in the display in one minute
steps. During the first 10 minutes the
machine measures how much water is
being absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washer-dryer
shows you when each section of the
programme is reached.
The drum lighting switches off once the
programme has started.
GRemove the laundry when the
programme has finished
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
Anti-crease
and
i
Programme finished.
Remove laundry, then
switch the machine off.
^
Turn the programme selector to the
Stopposition. Press theDoorbutton
to open the drum door.^Remove the laundry.
Only remove laundry from the
machine once the drum has stopped
turning. Reaching into a moving
drum is extremely dangerous and
could result in injury.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
Important!Always remove the
laundry before switching the machine
off. This is important to ensure that
the load size indicator works
correctly.
^Switch the machine off with theI-On/
0-Offbutton.
See After each washing or drying
programme for further information.
After washing a full load
If you have washed a full load of
laundry and you wish to dry the
laundry in the washer-dryer
afterwards you will have to remove
half the load. Carry out the drying
procedure in two batches.
WASHING
20