Miele Wt 2670 Wpm Operating Instructions

Load Consumption data
Energy Water Duration
in kWh in litres Short Normal
Washing
Cottons95°C 5.0 kg 1.70 42 1 h 53 min 2 h 08 min
60°C1)5.0 kg 0.85 42 1 h 29 min 1 h 58 min
40°C1)5.0 kg 0.49 42 1 h 29 min 1 h 58 min
Minimum iron40°C1)2.5 kg 0.44 49 1 h 05 min 1 h 20 min
Delicates30°C 1.0 kg 0.33 65 49 min 59 min
Automatic40°C 2.5 kg 0.30 - 0.60 30 - 50 1 h 00 min 1 h 15 min
Express40°C 2.5 kg 0.30 30 - 32 min
Woollens/30°C 2.0 kg 0.22 35 - 39 min
Silks/30°C 1.0 kg 0.24 39 - 36 min
Drying...

Height 850 mm
Width 595 mm
Depth 580 mm
Depth with door open 975 mm
Height for building under 820 mm
Width for building under 600 mm
Depth for building under 600 mm
Weight 101 kg
Maximum floor load 1600 Newton (approx. 160 kg)
Capacity - Washing
Capacity - Drying5.0 kg dry laundry
2.5 kg dry laundry
Voltage see data plate
Connected load see data plate
Fuse rating see data plate / plug
Consumption data see Consumption data
Water flow pressure minimum 100 kPa (1 bar)
Water flow pressure maximum 1000 kPa...

The Settings menu is used to alter the
machines electronics to suit
changing requirements.
Settings can be altered at any time.
To open theSettingsmenu
ASwitch on the machine. The main
menu will appear.
15:03
Select programme
BAfter a few seconds an additional line
will appear in the display.
15:03
Select programme
SettingsF...
CConfirm your selection by pressing
theOKbutton.
DThis will take you into theSettings
menu.
CBackA
LanguageF...
Time...H
EUse the–and+buttons to select the
setting you want and...

Time of day
You first have to decide whether you
want the time to show in the display.
Then you have to select either a 24 hour
or 12 hour clock.
Then set the current time of day.
To select a 24 hour or 12 hour clock
^Use the–and+buttons to select the
clock option setting you want and
confirm your selection by pressing
theOKbutton.
The display for setting the time of day
will then appear.
To set the time of day
00:00
Set the time
^Set the hour with the–and+buttons
and confirm your setting by pressing...

Gentle action
Activating gentle action reduces the
drum action and is suitable for
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
Gentle action can be activated for the
Cottonsand theMinimum iron
programmes.
If Gentle action has been activated the
wash rhythm will be gentle in all Cottons
and Minimum iron programmes.
The machine is delivered with the
Gentle action...

Distribution controller
The maximum final spin speed is
limited to prevent the laundry sticking
to the drum. (This setting is only
available when washing and drying in
a continuous sequence).
There are 4 different options:
1200 rpm (factory default setting)
1100 rpm
1000 rpm
900 rpm.
A tick will appear beside the option to
show that it has been set.
Alter time
The machine is designed to dry
effectively using as little energy as
possible. However, it ispossible to
lengthen or shorten the drying time
by up...

Lock
The system lock prevents your
machine being used without your
knowledge.
When the system lock has been
activated, you have to enter a code after
switching the machine on. Otherwise
the machine cannot be operated.
To activate the lock
CBackA
XActivate
^SelectActivateand confirm your
selection.
^The display will now request that a
code is entered. The code is125and
cannot be altered.
To enter the lock code
The code is:125
0__
Enter code
^
Use the+button to enter the first
number. Confirm your...

Temperature
You can choose for the temperature
to be displayed as°C/Celsiusor
°F/Fahrenheit.
A tick will appear beside the option to
show that it has been set.
^Select the option you want and
confirm your selection.
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are two volumes.
Normal
(the machine is delivered with
this option selected)
The buzzer sounds at the end of a
programme or when Rinse hold is
reached....

Standby
To save energy, the display goes out
after 10 minutes and the indicator
light for theStart/Stopbutton will start
flashing slowly.
There are two options:
On
Standby is activated:
–if a programme is not selected after
the machine has been switched on.
–after a programme has started.
– at the end of a programme.
Not in current Prog.
(the machine is
delivered with this option selected)
Standby is activated:
– if a programme is not selected after
the machine has been switched on.
– at the end of a...

Alteration rights reserved/2208M.-Nr. 06 533 680 / 02