Miele T 8822 C Manual

Clean out airways indicator
Fluff should be removed after drying.
TheClean out airwaysindicator will
remind you to clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
You will have an idea of how often this
should be done after a few drying
programmes.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed....

Keypad tone
An audible tone sounds each time a
button is pressed.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
\015Press theStart/Stopbutton and keep
it pressed in whilst carrying out steps
-.
Switch the dryer on.
Wait until theStart/Stopbutton lights up
constantly...
. . . and then release theStart/Stop
button.
Press theLow temperaturebutton
nine times.
– TheLow temperatureindicator light
will...

Adjusting the dryers
electronics for very soft water
In some areas of the UK, water
is extremely soft which can affect
the sensitivity of the control
electronics. If the dryer is installed in
an area of very soft water, you
should contact your local water
supplier for information and advice
regarding water hardness and water
conductivity. If the water
conductivity is less than 150 µS, the
following programmable function will
need to be activated.
Important. This programmable function
should not be...

Extending the range of the
drying levels
You can extend the range of the
drying levels for many of the
programmes:
Machine iron+
(drier than Machine iron).
Slightly dry
(drier than Hand iron).
Normal+
(drier than Normal).
This programmable function is only
available for programmes with drying
levels.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
\015Press theStart/Stopbutton and keep
it pressed in...

65 

66 

67 

M.-Nr. 09 872 120 / 02Alteration rights reserved/3715
www.miele.com/marine-service
America: +1 609 419 4376
Australia, Asia, Oceania: +61 3 9764 7880 
Europe, Africa, Middle East: +49 5241 89 66 877
International Service Contacts 
E-mail: [email protected]
Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany