Miele T 8822 C Manual

Start the programme
TheStart/Stopbutton will flash when a
programme is being selected. The
flashing indicates that a programme
can be started.
Press theStart/Stopbutton.
TheStart/Stopbutton will now light up
constantly.
ThePerfect Dryindicator will flash or
light up constantly with the sensor
controlled drying programmes. It will
not come on at all with timed drying
programmes (see Operating the
tumble dryer).
Please note: The duration shown in the
display is an estimate and can vary.
Before the end of...

Extra options
Low temperature
Delicate and minimum iron fabrics with
thesymbol on the care label (e.g.
acrylic garments) are dried at a lower
temperature. The programme duration
is longer.
On some programmesLow
temperatureis permanently activated
and so cannot be deselected.
Buzzer
A buzzer sounds (at intervals for a
maximum of 1 hr) to let you know the
programme has finished.
A continuous alarm will sound if there is
a fault even if the buzzer has been
switched off.
Delay start
You can delay the start...

Cottons** Max. load 7 kg*
Use for Cotton items such as those described underCottons Normal
with normal residual moisture levels.
Notes
–Items are dried to aNormallevel only.
–TheCottonsprogramme is the most energy-efficient
for drying cotton items with normal residual moisture levels.
Cottons Max. load 7 kg*
Extra dry, Normal
Use for Single and multi-layered cotton fabrics such as towelling,
T-shirts, underwear, flannelette bed linen.
Notes
–SelectExtra dryfor multi-layered and very thick fabrics.
–Do...

Woollens handcare Max. load 2 kg*
Fabric type Woollen fabrics
Notes
–This programme only fluffs up woollen garments. They are
not dried completely by this programme.
–Remove garments as soon as the programme has finished
and leave to finish drying at room temperature.
Low temperature Low temperature cannot be deselected.
Proofing Max. load 2.5 kg*
Normal
Fabric type For drying microfibre fabrics, skiwear, fine, closeweave cotton
garments (poplin) or tablecloths which are suitable for drying
in a tumble...

Shirts Max. load 2 kg*
Normal, Hand iron
Fabric type Shirts and blouses.
Low temperature Select the Low temperature option for delicate fabrics with
thesymbol on the care label.
Cool air Max. load 7 kg*
Fabric type Any item which only needs airing.
Warm air Max. load 7 kg*
Fabric type
–Voluminous and multi-layered fabrics whose layers have
different drying characteristics, e.g. jackets, pillows.
–For drying individual items, e.g. bath towels, swimwear,
tea-towels.
Note – Do not select the longest drying...

Once a programme has started
- changing the programme
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
You will need to cancel the current
programme before you can select a
new one.
- cancelling the programme and then
selecting a different programme
Press theStart/Stopbutton.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press theStart/Stopbutton
again during the cooling...

The system lock prevents the dryer
being used without your knowledge.
It can be activated if wished.
The dryers electronics are then locked.
The dryer can still be switched on but a
programme cannot be started.
–If an attempt is made to start a
programme, the indicator light for the
Low temperaturebutton will come on
and a key symbol0-§will appear in
the display.
The door is not locked and can be
opened at any time.
To activate the lock
Before you begin, first ensure that
:
– The tumble dryer is switched...

Emptying the condensed
water container
The condensed water will be collected
in the condensed water container
unless the dryer has been connected
for external drainage (see Installation).
Empty the condensed water
container after every drying
programme.
TheEmpty containerindicator will light
up if the maximum level of the
condensed water container is reached.
The indicator light will go out when the
door is opened and closed again.

Pull out the condensed water
container.

To prevent water running out,...

Cleaning the fluff filters
The fluff which is created by the drying
process is collected by the fluff filters in
the door and the door opening. Clean
the filters aftereachdrying
programme*.
Cleaning them whilst dry
Tip: You can also use a vacuum
cleaner to remove the fluff.

Open the door and pull the fluff filter
(1) out of the door as illustrated.

Use your fingers to remove the fluff
from the surface of the filter.Remove any fluff from the hollow part
of the door opening. You could also
use a...

Cleaning them with water
If there is a great deal of compacted
fluff on any of the filters, they can be
removed and cleaned under hot
running water.
Open the door and pull the fluff filter
out of the door as described
previously.
The two filters in the door opening can
also be removed if you need to clean
them with water.

Turn dialand pull the filter by the
dial out of the door opening as shown
. Do the same on the other side.

Rinse all the filters under hot, running
water.

Then shake the...