Miele T 8822 C Manual

Height 850 mm
Width 595 mm
Depth 587 mm
Depth with door open 1062 mm
Height for building under 820 mm
Width for building under 600 mm
Depth for building under 600 mm
Suitable for pushing under a
worktopyes
Suitable for stacking yes
Weight 51 kg
Drum volume 111 l
Maximum capacity 7 kg dry weight
Capacity of condensed water
containerapprox. 4.2 l
Drain hose length 1.5 m
Maximum delivery head 1.5 m
Maximum drain hose length 4 m
Length of connection cable 2 m
Voltage
Connected load
Fuse rating see data...

Altering the residual moisture
level in the Cottons
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier or damper, you can reduce
or increase the default residual
moisture in the Cottons programme.
Please note: TheCottons
programme will remain unchanged.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
\015Press...

Altering the residual moisture
level in the Minimum iron
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier or damper, you can reduce
or increase the default residual
moisture in the Minimum iron
programme.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
\015Press theStart/Stopbutton and keep
it pressed in...

Anti-crease
Anti-crease helps prevent creasing, if
laundry is not normally removed im
-
mediately after the end of a
programme.
The anti-crease function
–is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
–is used in all programmes except
Woollens handcare.
– should be left activated.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door...

Altering the volume of the
buzzer
The buzzer has two volumes.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
\015Press theStart/Stopbutton and keep
it pressed in whilst carrying out steps
-.
Switch the dryer on.
Wait until theStart/Stopbutton lights up
constantly...
. . . and then release theStart/Stop
button.
Press theLow temperaturebutton
three times.
– TheLow temperatureindicator light
will...

Altering the standard drying
level in the Automatic plus
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier or damper, you can reduce
or increase the default residual
moisture in the Automatic plus
programme.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
\015Press theStart/Stopbutton and keep
it pressed in...

Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be extended by 5 or 10 minutes,
if required. This makes the garments
easier to handle.
The cooling down time can only be
extended for programmes with drying
levels.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
\015Press theStart/Stopbutton and keep
it pressed in whilst carrying out steps...

Standby
To save energy, the display and the
programme sequence/check lights
go out after 10 minutes and the
Start/Stopbutton starts flashing
slowly.
To come out of standby mode
Turn the programme selector or
press a button. Neither will have any
effect if a programme is running.
On
The standby function is activated and
the display and programme
sequence/check lights will go out after
10 minutes:
– if a programme is not selected after
the dryer has been switched on.
– after a programme has started.
They...

Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
\015Press theStart/Stopbutton and keep
it pressed in whilst carrying out steps
-.
Switch the dryer on.
Wait until theStart/Stopbutton lights up
constantly...
. . . and then release theStart/Stop
button.
Press theLow temperaturebutton six
times.
– TheLow temperatureindicator light
will flash 8 times briefly.
Anumberto show which option is
selected will appear in the display
alternating with the letterP.
0On...

Memory function
The electronics will store in memory a
drying level or extra options for a
selected programme. The duration
selected for the timed drying
programmes will also be stored in
memory.
These settings will be selected
automatically the next time the
programme is chosen. You can either
accept these or change them by
pressing the appropriate button.
Please note: TheCottons
programme will remain unchanged.
Follow the steps (\015,,...) to
programme and store in memory.
Before you begin, ensure...