Miele Pw 6065 Operating Manual

1. Sort the laundry
^Empty all pockets.
,Foreign objects left in pockets
(e.g. nails, coins, paper clips, etc.)
can cause damage to clothes and
the machine.
^Pre-treat stains.
Tough stains (blood, egg, coffee, tea
etc.) or badly soiled areas (collars and
cuffs) should be penetrated with a stain
remover or a paste made from powder
detergent and warm water. Dab stains
with a damp light colored cloth. Do not
rub!
,Do not use chemical solvents in
the machine.
^
Sort the laundry.General tips
–Dark fabrics...

2. Load the washer
^Open the drum door using thea
button.
The drum light lights.
^Load the laundry loosely into the
drum.
For best results, wash mixed loads of
small and large items. This will improve
washing effectiveness and help
distribute the load evenly.
For the lowest energy and water
consumption load the washer to its
max. capacity. See Program guide.
Note: Overloading the washer will affect
wash results and cause wrinkling.
^Close the drum door.
Close the drum door. To prevent
damage to the door...

4. Adding detergent
Use detergent according to the laundry
soiling and water hardness.
Too little detergent may cause:
–ineffective cleaning of laundry;
fabrics may become gray and stiff
over time.
–grease stains on the laundry.
–hard water deposits on the heating
element.
Too much detergent may cause:
– oversudsing with minimal drum
movement; poor wash, rinse and
spin results.
– higher environmental burden.
See Detergent for more information.^Pull out the detergent dispenser
drawer and add detergent.
j=...

5. Starting a program
Start flashes when a program can be
started.
^Press the Start button.
The Start button lights.
The display shows the approximate
program run time. It will count down in
minutes. The first 10 minutes the
washer calculates the water
absorbency of the laundry. The overall
program time may be shortened or
lengthened.
Additionally the sequence cycle is
displayed. The washer shows the
current program step.
The drum light turns off after the
program starts.
Press one of the following...

The washer has the option to save the most used wash
programs on the direct select buttons. The option Save
must be selected in the Settings - Supervisor level.
Contact Technical Service for access to this level.
Selecting/Changing a Favorite
Main menu
1 Cottons Uni. 60°CProgram selection
2 Minimum iron 40°C SettingsF
3 Delicates 40°C
4 WoollensH30°C12:00
^Press any direct select button, e.g.D.
Basic menu
Cottons Uni.60°C1400 rpm
Duration 0:45 h
Extras
HDelay Start
Y
HSave
HBackA
H
^Turn the jog shuttle...

– Selecting a temperature
Cottons Uni.60°C 1400 rpm
Temperature
cold - 60°Ca
^Select the desired temperature with the jog shuttle and
confirm. The basic menu shows again.
– Selecting the spin speed
Cottons Uni. 60 °C1400rpm
Spin speed
0 - 1400 rpmt
^Select the desired spin speed with the jog shuttle and
confirm. The basic menu shows again.
Selecting Extras
^Press the direct select buttonD. The sub-menu Extras
shows.
Cottons Uni.60°C1400 rpm
OptionsPre-wash
Starch Stop Rinse hold
BackA
^
Select the...

Saving a Favorite
The basic menu shows all selected components.
Cottons Uni.40°C1400 rpm
Pre-wash
Duration 00:53:00 h
Extras
HDelay StartY
HSave
HBackA
H
^Press the direct select buttonF.
Assigning a direct select button
Cottons Uni.40°C1400 rpm
Pre-wash
until now : Cottons Uni. 60°C1400 rpm
Saving to :1
2 3 4 BackA
^Select the desired number for the favorite with the jog
shuttle and confirm. The favorite is saved with the individual
selections and shows in the main menu.
To assign more favorites, repeat...

The basic wash programs can be enhanced with Extras.
Accessing the sub-menu "Extras"
Cottons Uni.60°C1400 rpm
Duration 0:45 h
Extras
HDelay StartY
HBackA
H
^Press the direct select buttonD. The sub-menu Extras
shows.
Selecting Extras
Cottons Uni.60°C1400 rpm
OptionsPre-wash
Starch Stop Rinse hold
BackA
^Select the desired Extras with the jog shuttle and confirm.
– Repeat if another Extra is desired.
– A selected Extra is marked with a tick.
Pre-wash
For laundry with heavy soiling e.g. dust,...

Rinse Stop
The washer stops after the last rinse, the laundry remains
soaking in water. This will prevent wrinkles if the laundry is not
removed immediately at the end of the wash program.
Intensive*
For laundry with normal to heavy soiling or stains.
The total time for the wash program will be extended.
Water plus*
The washer comes factory set with the Extra selection Water
plus activated. The water level during washing and rinsing is
increased.
Other settings for Water plus can be selected. See...

The delay start option allows you to select the program end
time. The program start can be delayed between 30 minutes
and 24 hours.
Select the sub-menu Delay Start
Cottons Uni.60°C1400 rpm
Duration 0:45 h
Extras
HDelay StartY
HBackA
H
^Press the direct select buttonE. The Delay Start menu
shows.
Select the Delay Start time
The program end can be selected in 30 minute steps.
Cottons Uni.60°C1400 rpm
12:03Start time:15:45
Finish:16:30
^Select the desired program end time with the jog shuttle
and confirm....