Miele Kfn 14827 Sdeed Operating And Installation Instructions

							~This appliance must not be used in
a non-stationary location (e.g. on a
ship).
~In countries where there are areas
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
Correct use
~Never handle frozen food with wet
hands. Your hands may freeze to the
frozen food. Danger of frost burn.
~Do not operate any electrical
equipment (e.g. an electric ice-cream
maker) inside the appliance. Danger of
sparking and explosion.
~Do not take ice cubes out with your
bare hands and never place ice cubes
or ice lollies in your mouth straight from
the freezer.
The very low temperature of the frozen
ice or lollies can cause frost burn to the
lips and tongue.
~Do not refreeze thawed or partially
thawed food. Defrosted food should be
used up as quickly as possible, as food
soon loses its nutritional value and goes
off. Defrosted food may only be
re-frozen after it has been cooked.
~Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
~Do not store cans or bottles
containing carbonated drinks or liquids
which could freeze in the freezer. The
cans or bottles could explode. Danger
of injury and damage to the appliance.
~When cooling drinks quickly in the
freezer, make sure bottles are not left in
for more than one hour; otherwise they
could burst. Danger of injury and
damage to the appliance.
~Observe the use by dates given on
food to avoid the risk of food poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
temperature at which it is stored. Follow
the instructions given on the food
manufacturers packaging regarding
storage conditions and use-by dates.
~Do not use sharp edged objects to
–
remove frost and ice,
–
separate frozen foods and remove
ice trays.
They will damage the evaporator,
causing irreversible damage to the
appliance.
~Never place electric heaters or
candles in the appliance to defrost it.
These can damage the plastic parts.
Warning and Safety instructions
11
 
						

							~Do not use defrosting sprays or
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
~Do not use any oils or grease on the
door seals, as these will cause the
seals to deteriorate and become
porous with time.
~If storing food which contains a lot of
fat or oil, make sure that it does not
come into contact with plastic
components as this could cause stress
cracks.
~Do not block the ventilation gaps in
the appliance as this would impair the
efficiency of the appliance, increase the
electricity consumption and could
cause damage to the appliance.
~The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
can lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
~Do not use a steam-cleaning
appliance to defrost or clean this
appliance. Steam could reach the
electrical components and cause a
short circuit.Stainless steel appliances
~Do not use sticky notes, transparent
adhesive tape, masking tape or other
types of adhesive on the surface of the
door.
These damage the surface, causing it
to lose its dirt repellent protective
coating.
~The high-quality surface of the door
is supsceptible to scratching.
Even fridge magnets can cause
scratching.
Disposal of your old appliance
~Before disposing of an old
appliance, first make the door latch or
lock unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
~Be careful not to damage any part of
the pipework whilst awaiting disposal,
e.g. by
–
puncturing the refrigerant channels
in the evaporator.
–
bending any pipework.
–
scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and safety instructions.
Warning and Safety instructions
12
 
						

							Normal energy
consumptionIncreased energy
consumption
Installation siteIn a ventilated room. In an enclosed, unventilated room.
Protected from direct sunlight. In direct sunlight.
Not near to a heat source (radiator,
oven).Near to a heat source (radiator,
oven).
Where the ideal ambient room
temperature is approx. 20°C.Where there is a high ambient room
temperature.
Do not cover the ventilation gaps
and dust them regularly.
Temperature setting
with a thermostat
which is approximate
(set in stages).With a medium setting of 2 to 3. With a high setting: the lower the
temperature in the compartment, the
higher the energy consumption.
Temperature setting
with a thermostat which
is exact to the degree
(digital display).Larder section 8 to 12 °C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer than
16 °C . Refrigerator section 4 to 5 °C
PerfectFresh zone just above 0 °C
Freezer section -18 °C
Wine storage section 10 to 12 °C
UseDrawers, shelves and racks
arranged as they were when the
appliance was delivered.
Only open the door when necessary
and for as short a time as possible.Frequent opening of the door for
long periods will cause a loss of
coldness.
Store food in an organised way. Searching for an item will mean the
door is open for longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.Hot food will cause the compressor
to run for a long time, as the
appliance will have to work harder
to reduce the temperature.
Store food covered or packaged. The evaporation or condensation of
liquids will cause a loss of coldness
in the refrigerator.
Place frozen food in the refrigerator
to defrost.
Do not over-fill the appliance to
allow air to circulate.
DefrostingDefrost the freezer section when a
layer of ice 0.5 cm thick has built
up.A layer of ice hinders the cold from
reaching the frozen food, and
increases energy consumption.
How to save energy
13
 
						

							Before using for the first time
Protective foil
On stainless steel appliances, the outer
surfaces are also covered with
protective foil.
^Do not remove the foil until the
appliance has been positioned in its
final location.
Cleaning and care
^On stainless steel appliances also
treat the side panels with the Miele
stainless steel conditioning agent
supplied as soon as you have
removed the protective foil.
The appliance doors have a special
finish which is resistant to soiling.Do
not useMiele stainless steel
conditioner on the appliance door.
Important. Each time it is used, the
Miele stainless steel conditioning
agent forms a water and dirt repellent
protective coating.
^
Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and then
dry with a soft cloth.
Active charcoal filters
(Active Air Clean charcoal filters)
^
Place the active charcoal filters
supplied in the holder, and place the
holder on one of the shelves in the
PerfectFresh zone (see Active
charcoal filters).
Operating the appliance
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Switching on
The PefectFresh zone and freezer
section are switched on together with
the On/Off sensor.
^Touch the On/Off sensor until the
temperature display lights up.
If the temperatures in the appliance are
not within the range that the appliance
is able to display, only bars will light up
in the temperature displays.
The PerfectFresh and the Freezer
symbols as well as the Alarm off sensor
will flash until the temperatures are
sufficiently low.
As soon as the temperatures are within
the range that the appliance is able to
display, the temperature display will
show the current temperature.
The appliance will start to cool, and the
interior lighting will come on when the
PerfectFresh zone door is opened.
Switching on and off
14
 
						

							To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18°C.
To switch between the PerfectFresh
zone and freezer section touch the
relevant sensor.
If you want to select the freezer section
(to check the temperature, for
example),
^
touch the freezer sensor. It will light
up yellow.
Depending on which zone/section you
have selected, you can
–
select either Super cool or Super
freeze, or
–
adjust the temperature.
Please refer to the relevant section for
more information.
Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
Switching off
^Touch the On/Off sensor until all of
the indicators go out. (If this does not
happen, the safety lock is still
activated).
If the PerfectFresh zone is switched on,
the PerfectFresh zone and the freezer
section will switch off one after the
other.
The interior lighting will not come on
when you open the door and the
cooling process will be switched off.
To switch the PerfectFresh zone off
separately
The PerfectFresh zone can be switched
off without having to switch off the
freezer section. This is useful e.g. whilst
on holiday.
^
Select the PerfectFresh zone.
The PerfectFresh symbol will light up
yellow.
Switching on and off
15
 
						

							^Touch the On/Off sensor until the
PerfectFresh symbol goes out.
The interior lighting will not come on
when you open the door and the
PerfectFresh zone is switched off.
The freezer section remains switched
on and the Freezer symbol is lit up.
To switch the PerfectFresh zone
back on again
^Select the PerfectFresh zone. The
PerfectFresh sensor lights up
yellow, then touch the On/Off sensor
until the temperature display lights
up, or
^
Switch the appliance off and then
back on again.
The appliance will start to cool, and the
interior lighting will come on when the
PerfectFresh zone door is opened.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^switch the appliance off,
^disconnect it from the mains. Switch
off at the wall and withdraw the plug
from the socket, or disconnect the
mains fuse,
^empty and clean the ice cube tray,
^close the stopcock for the water inlet,
^clean the appliance out and
^leave the doors ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left shut,
there is a danger of mould and odours
building up inside the appliance.
Switching on and off
16
 
						

							Settings mode
Certain settings on the appliance can
only be selected in the settings mode.
How to select the settings mode and
how to change the settings is
described in the relevant section of
these instructions.
Overview of functions that can be
selected in the settings mode:
To enter or leave the settings
modec
To switch the sensor tones
on/off
(see Switching on and off)b
To confirm that the active
charcoal filters have been
changed (see Active charcoal
filters)^
To switch the safety lock on/off
(see Switching on and off)u
To change the brightness of
the temperature display
(see The correct
temperature)d
To set the water intake time for
the ice cube maker
(see Making ice cubes)e
The door alarm is automatically
disabled when the appliance is in
the settings mode. As soon as the
door is closed, the door alarm is
activated again.Switching the sensor tones on/off
The sensor tone which sounds each
time a sensor is touched can be
deactivated.
^Touch and leave your finger on the
sensor.
^At the same time, briefly touch the
On/Off sensor (without letting go of
thesensor).
^Leave your finger on thesensor for
another 5 seconds untilcappears in
the display.
^Touch thesensor repeatedly untilb
appears in the display.
^
Touch the On/Off sensor.
^
By touching thesensor, you can
now select whether the sensor tones
are switched on or off:
b0: Sensor tones are switched off
b1: Sensor tones are switched on
b–: Return to menu.
The old setting lights up, and your
newly selected setting flashes.
^
Touch the On/Off sensor to confirm
the new setting.
^
Touch thesensor repeatedly until
cappears in the display.
^
Touch the On/Off sensor.
You have now left the settings mode.
Switching on and off
17
 
						

							Activating or deactivating the safety
lock
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
^Touch and leave your finger on the
sensor.
^At the same time, briefly touch the
On/Off sensor (without letting go of
thesensor).
^Leave your finger on thesensor for
another 5 seconds untilcappears in
the display.
^Touch thesensor repeatedly until
uappears in the display.
^
Touch the On/Off sensor.
^
By touching thesensor, you can
now select whether the safety lock is
switched on or off:
u0: The safety lock is deactivated
u1: The safety lock is activated
u–: Return to menu.
The old setting lights up, and your
newly selected setting flashes.
^
Touch the On/Off sensor to confirm
the new setting.
^
Touch thesensor repeatedly until
cappears in the display.
^
Touch the On/Off sensor.You have now left the settings mode.
The safety lock indicator
Xwill light up
in the temperature display when the
safety lock has been activated.
Switching on and off
18
 
						

							It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
The temperature in the appliance will
rise:
–the more often the door is opened
and the longer it is kept open,
– the more food that is stored in it,
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
...inthePerfectFresh zone
The temperature in the PerfectFresh
zone is controlled automatically, and is
maintained at0to2°C.
Setting the temperature in the
PerfectFresh zone
The temperature in the PerfectFresh
zone can be raised or lowered, e.g. if
you want to use it for storing items like
fish.
^Select the PerfectFresh zone.
The PerfectFresh symbol will light up
yellow.
^You can now adjust the temperature
in the PerfectFresh zone by touching
thesensor.
You can choose from settings
b1tob9:
b1: Lowest temperature,
b9: Highest temperature.
By touching the
sensor: the temperature will get
colder
sensor: the temperature will get
warmer.
The setting being set will flash in the
display.
The following information shows in the
display when the sensors are touched:
–
Touching a sensor once: thelast
setting selectedflashes.
The correct temperature
19
 
						

							–Each subsequent touch of a sensor:
changes the setting incrementally.
–Leaving a finger on the sensor:
changes the setting continuously.
Approx. 5 seconds after taking your
finger off a sensor, the current setting of
the PerfectFresh zone is automatically
shown.
The settings,b1tob9have specific
temperature ranges allocated to
them. The temperature itself will not
appear in the display.
b5is the default setting for the
PerfectFresh zone. If a setting ofb1
tob4is selected, the temperature
can fall below 0°C. Food could
freeze!
Dynamic cooling
The dynamic cooling fan automatically
switches on when the cooling system
for the PerfectFresh zone switches on.
It distributes the temperature in the
PerfectFresh zone to all areas more
evenly so that all the food will be chilled
to about the same degree.
...inthefreezer section
To freeze fresh food and to store frozen
food for a long time, a temperature of
-18 °Cis required. At this temperature
the growth of micro-organisms is
generally halted. As soon as the
temperature rises above -10 °C, the
micro-organisms become active in the
food again so that it cannot be kept as
long. For this reason, partially defrosted
or defrosted food must not be re-frozen.
Food may be re-frozen once it has
been cooked, as the high temperatures
achieved when cooking destroy most
micro-organisms.
Setting the temperature in the
freezer section
^
Select the freezer section.
The Freezer symbol will light up
yellow.
^
You can now use the arrow sensors
on either side of the temperature
display to set the temperature you
require.
By touching the
sensor: the temperature will get
colder
sensor: the temperature will get
warmer.
The correct temperature
20