Miele H 6860 Bp Manual

Cleaning and care
131
Preparation
You will need a container of approx. 1
litre capacity.
A plastic tube (with suction cup) is
supplied with your oven so that you
do not have to hold the container with
the descaling agent underneath the
water intake pipe.
We recommend using the descaling
tablets supplied. They have been
specially developed for Miele for
optimum results.
Other descaling agents, which
contain other acids besides citric
acid and/or other undesirable
substances, such as chlorides for
example,...

Cleaning and care
132
0004Place the container with the
descaling solution on the floor of the
oven.
0004Attach the plastic tube to the end of
the water intake pipe. Place the other
end in the bottom of the descaling
solution container, and secure the
plastic tube to the container with the
suction cup.
0004Confirm with OK.
The intake process will begin. You can
hear the pump while this is happening.
The intake process can be interrupted
and restarted at any time by selecting
Stop or Start .
The amount of...

Cleaning and care
133
At the end of the activation phase the
steam injection system will need to be
cleaned to remove all traces of
descaling solution.
Cleaning is carried out by flushing
approx. 1 litre of fresh tap water
through the system. The water is
collected in the universal tray. This
process is repeated three times.
0004Take the universal tray out of the oven
and empty it. Place the tray back in
the oven again on the top shelf level.
0004Detach the plastic tube from the
container.
0004Rinse the...

Cleaning and care
134
The Evaporate residual moisture
process will begin after the third rinsing
process.
0004Remove the container and tube from
the oven.
0004Close the door.
0004Confirm with OK.
Steam can cause scalding.
Do not open the door while the
residual water is being evaporated.
The oven heating will switch on and the
duration for the evaporation process will
count down in the display.
During the evaporation process, the
duration may be adjusted by the system
according to how much water is...

What to do if ...
135
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
If having followed the suggestions below, you still cannot resolve the problem,
please contact Miele (see back cover for contact details).
Danger of injury. Installation, maintenance and repairs may only be carried
out by a suitably qualified and competent person. 
Repairs and other work by unqualified persons could be dangerous. Miele
cannot be held liable for unauthorised work....

What to do if ...
136
ProblemCause and remedy
The oven does not heat
up.Demo mode has been activated.
The oven can be operated but does not heat up.0004 Deactivate demo mode. See "Settings -
Showroom programme".
Power cut - process
cancelled  appears in the
display.There has been a power cut which has caused a
current process to stop.
0004 Switch the oven off and then back on again.
0004 Start the programme again.
12:00 has appeared in
the display.The power supply was interrupted for longer than...

What to do if ...
137
ProblemCause and remedy
Function currently not
available appears in the
display after selecting
the Descale function.The steam injection system is faulty.
0004 Call Miele Service.
Fault with moisture control
the automatic programmes
will run without moisture
appears in the display
after selecting an
Automatic programme.The steam injection system is faulty.
0004 Call Miele Service.
In the meantime a programme without moisture
can be run.
Fault with moisture control -
Moisture plus...

What to do if ...
138
ProblemCause and remedy
Browning is uneven.The wrong temperature or shelf level was selected.0004 There will always be a slight unevenness. If the
unevenness is pronounced, check that the correct
temperature and shelf level have been selected.
The material or colour of the baking tin is not suitable
for the oven function.
0004 When using Conventional heat  use matt, dark
coloured pans. Light coloured, shiny pans will not
produce as desirable results.
The catalyser has been set at...

What to do if ...
139
ProblemCause and remedy
The side oven lighting
does not turn on.The halogen lamp needs replacing.
Danger of burning.
Make sure the oven heating elements are switched
off and that the oven cavity is cool.
0004 Disconnect the appliance from the mains.
0004 Remove the side rails.
0004 Release the lamp cover from its holder using the
tool supplied.
0004 Replace it with a new halogen lamp (Osram 66725
AM/A, 230 V, 25 W, G9).
0004 Press the lamp cover back into its retainer and refit
the...

After Sales / Guarantee
140
After sales service
In the event of any faults which you
cannot easily remedy, please contact
–your Miele Dealer, or
–Miele Service.
See end of this booklet for contact
details.
Please note that telephone calls may
be monitored and recorded for training
purposes.
N.B. A call-out charge will be applied to
service visits where the problem could
have been resolved as described in
these instructions.
When contacting your Dealer or Miele,
please quote the model and serial
number of...