Miele G 892 Scu Plus Manual

In the event of a fault which you cannot
correct yourself please contact the
Miele Technical Service Department.
U1-800-999-1360
[email protected]
V1-800-565-6435
[email protected]
When contacting the Miele Technical
Service Department, please quote the
model and serial number of your
appliance.
These can be found on the data plate
on the upper inside edge of the
dishwasher door.Program update function - PC
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new...

To transport the dishwasher, e. g. when
moving to a new home, note the
following:
–Empty the dishwasher.
–Secure any loose parts, e. g. hoses,
cables, cutlery baskets.
–Transport the dishwasher in the
upright position.
If unavoidable it may be transported
on its back.
Do not transport it on its side or on
the door. Residual water in the
machine could leak and cause
electrical damage.
Transport
42 

User Maintenance Instructions
To prevent accidents
and machine damage,
read these instructions
beforeinstallation or use. 

Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
The filter system should be cleaned
every 4 - 6 months or whenever a
foreign object is trapped.
Cleaning the filter in the wash
cabinet
^Turn off the dishwasher before
cleaning.
^
Turn the handle counterclockwise to
release the triple filter system.^Lift the filter out of the...

To clean the underside of the filter, the
flap must be opened:
^Pull back the yellow clip.
^Rinse all parts under running water.
Scrub with a nylon brush if
necessary.
^Close the flap so that the clip
engages.^Return the filter so it lies flat in the
base of the wash cabinet.
^Lock the filter by turning the handle
clockwise.
,The dishwasher must not be
used without the filter locked in
place.
45 

Cleaning the spray arms
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^Turn off the dishwasher before
cleaning.
Remove the spray arms as follows:
^Remove the cutlery tray (if present).
^Press the top
spray arm upwards to
engage the inner ratchet and
unscrew the spray arm.
^
Lift up the middle
spray arm,a, to
engage the ratchet and unscrew the
spray arm,b.^Remove the lower basket.
^Pull the lower
spray arm firmly
upwards to...

Cleaning the wash cabinet
Generally, the wash cabinet is self
cleaning if the correct amount of
dishwasher detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer or the Miele Technical Service
Department.
Cleaning the door and door
seal
^Wipe the door seal with a damp cloth
to remove any food particles.
^Food residue and spilt liquids should
be wiped from the sides of the
dishwasher door. These are outside
of the wash cabinet and...

Cleaning the water inlet filter
A filter is incorporated in the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard, or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
Installing an in-line water filter
^If your water contains a large number
of insoluble substances, a filter
between the water valve and the
intake hose connection is
recommended. These filters can be
purchased from Miele’s Technical
Service Department.,The...

Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^Turn off the dishwasher.
^Remove the triple filter (see Cleaning
the filter in the wash cabinet).
^Use a jug or bowl to scoop water out
of the wash cabinet.
^
Tilt the locking clamp to the side.^Pull out the non-return valve and
rinse well under running water.
The drain pump is beneath the
non-return valve (see arrow).
^
Before returning the...

50