Midway Kart Fury 39in Operations Manual

							C.A.R.T. FURY15
CHAPTER 3 SERVICE
To service the Power Supply, continued…
Remove the two front and two rear screws from the supply, then lift it off of the power chassis.  Note volt-
age setting.
Perform the desired repair or equipment replacement.
Be sure to set the voltage switch to the correct value prior to reinstallation.  
Set the supply on the power chassis and align the mounting holes.  Install the four screws and the two 
power connectors.
To service the Transformer…
Switch off the power to the game machine and unplug the AC line cord.
Unlock and remove the rear door.
If the power to the Video Game Machine (VGM) was only recently disconnected, the transformer may 
still be warm. Allow the transformer to cool completely before handling.
Label and disconnect all wiring, including ground.
Remove the screws used to fasten the transformer to the base of the cabinet.
Perform the desired repair or equipment replacement.
To service Fan Assembly…
Switch off the power to the game machine and unplug the AC line cord.
Unlock and remove the rear door. 
Remove the perforated metal cover to expose the fan assembly and set aside. 
Unplug the fan power connector from the wiring. 
Remove the screws used to fasten a fan down and then lift fan out. 
Perform the desired repair or equipment replacement. 
To service Speakers in Head Rest…
Refer to the Seat Pedestal Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Remove the tamper resistant screws from the speaker grille.
Remove the tamper resistant screws used to fasten the speaker plate to the seat and pull forward.
Label and disconnect wires, including ground.
Remove the nuts used to fasten the speaker to the plate and remove speaker(s).
Perform desired repair or equipment replacement.
Reinstall the speaker(s) to the speaker plate and reattach wiring, including ground. Attach the speaker 
plate to the seat.
Reinstall speaker grille and fasten in place with hardware provided.
To service Speaker in Seat Back… 
Refer to the Seat Pedestal Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Remove the tamper resistant screws used to fasten the grille to the seat and pull forward.
Label and disconnect wires, including ground.
Remove 4 Phillips head screws used to fasten the speaker to the seat and remove speaker.
Perform desired repair or equipment replacement.
Reinstall speaker and reattach wiring, including ground.
Reinstall speaker grille and fasten in place with hardware provided.
DANGER 
High voltage present. Exercise extreme caution while servicing transformer. 
						

							16 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
To service the Seat Slide Assembly… 
Refer to the Seat Pedestal Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Disconnect the Seat Assembly from the cabinet by removing the tamper resistant screws used to fasten 
the assembly to the slide rails in the cabinet.
Slide the Seat Assembly halfway back along the rails to expose wiring. 
Disconnect the speaker cable and slide the seat the rest of the way off the rails.
Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting 
plate assembly off the pedestal and set aside.     
Slide the seat assembly forward, and remove the two tamper resistant screws from the rear of the metal 
panel on top of the pedestal assembly. 
Slide the seat assembly backward and remove the two tamper resistant screws from the front of the 
metal panel. 
Lift the metal panel out of the pedestal base and turn the unit over.
Remove the four nuts holding the metal panel to the slide assembly. Set the metal panel aside and slide 
assembly is exposed. 
Perform the desired repair or equipment replacement. 
Reinstall by performing the steps in reverse and fasten in place using the hardware provided.  
IMPORTANT:
 Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and torque 
each bolt to seven to nine ft.-lbs. (0.7 to 1.0 Nm) if it was loosened (see illustration).
To service the Seat Assembly… 
The Seat Assembly includes the pedestal base. 
Refer to the Seat Pedestal Service illustration.
Switch off the power to the game machine and unplug the AC line cord.
Disconnect the Seat Assembly from the cabinet by removing 8 tamper resistant screws used to fasten 
the assembly to the slide rails in the cabinet.
Slide the Seat Assembly halfway back along the rails to expose wiring. 
Disconnect the speaker cable and slide the seat the rest of the way off the rails.
Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting 
plate assembly off the pedestal. 
Place the seat on its back, on a flat surface. Perform the desired repair or equipment replacement. 
Reinstall using the hardware provided.  
IMPORTANT:
 Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and torque 
each bolt to seven to nine ft.-lbs. (0.7 to 1.0 Nm) if it was loosened (see illustration). 
						

							C.A.R.T. FURY17
CHAPTER 3 SERVICE
SEAT PEDESTAL SERVICE 
						

							18 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 3 SERVICE
NOTES 
						

							WARNING:  Use of Non-Midway parts or circuit modifications may cause serious injury or 
equipment damage!  Use only Midway authorized parts.  
• For safety and reliability, substitute parts and modifications are not recommended.                           
• Substitute parts or modifications may void EMC directive or FCC type acceptance. 
CHAPTER FOUR
PARTS
C.A.R.T. FURY 
						

							CHAPTER 4 PARTS
2    MIDWAY AMUSEMENT GAMES, LLC
4320-01164-20B
4701-00005-00 4700-00033-00
04-12959
4700-00075-00B 4701-00005-00
4020-01100-20
Cabinet Front View
Pedestal Assembly
04-12760-1
04-12760-2
OTHER COMPONENTS
  04-12461-1  LEFT DASH BRACKET
  04-12461-2  RIGHT DASH BRACKET
  5555-16059-00  6.5 SUB WOOFER SPEAKER
  01-13980  FRONT SPEAKER GRILLE
  01-13550  CABINET BOTTOM EDGE04-10635 01-15090 04-12690-303-9947
31-3536
23-672323-682203-9976 08-8016 5675-15773-00A-22506
08-8383 
						

							CHAPTER 4 PARTS
3C.A.R.T. FURY
Caster & Leveler Assemblies
Marquee Interior View
04-12690-3
03-9956
5555-15098-00
08-8383
20-9275-304-12786
5675-15773-00 08-8016
FRONT
PERSPECTIVE
VIEW 
						

							CHAPTER 4 PARTS
4    MIDWAY AMUSEMENT GAMES, LLC
Cabinet Rear View
Rear Door Assembly
5675-15773-0003-8326
A-23353
01-8989
01-11291
03-7602 4108-01219-11
4420-01141-00
4320-01164-20B
4320-01164-20B11-1367
4420-01141-00
01-11285
20-10350 01-7264 
						

							CHAPTER 4 PARTS
5C.A.R.T. FURY
Marquee Assembly
31-3536
03-995603-99474108-01219-20
03-9633
04-13062A-22506 01-15090
4506-01106-24B
11-1377
5555-15098-00 4108-01219-20
4406-01128-00
04-12690-34408-01128-00
4700-00033-00B
4020-01100-16
4320-01124-16
04-12786
01-15091
RM-22-3808-8383
4700-00135-004108-01219-11
20-9275-3
4408-01128-00
4700-00135-00
Pedal Assembly 20-10135 
						

							CHAPTER 4 PARTS
6    MIDWAY AMUSEMENT GAMES, LLC
Seat Pedestal Assembly
31-3538
01-15250
OTHER COMPONENTS
  H-23579  SEAT SPEAKER CABLE
  01-15251.1  ROLL BAR BRACKET
04-12911 04-10872
23-6822 04-11293.2
4020-01148-404322-01070-12
4701-00006-00
01-135514700-00131-00
4702-00014-00B 5555-16059-00 4110-01001-20
4108-01193-10B
04-12674-1
4020-01100-084108-01193-10B
04-12815-101-14945.2-2 31-3525-2
4108-01193-10B01-14939-2 01-14939-1 01-14945.2-1 31-3525-1
4408-01119-00
03-99755555-16234-00
4108-01042-12