Midway Kart Fury 39in Operations Manual

							C.A.R.T. FURY3
CHAPTER 2 DIAGNOSTICS
DIAGNOSTIC MENU
To verify the condition of the electrical and electronic hardware in the game, select Diagnostics Menu at 
the Main Menu. Diagnostic tests assist you in checking and adjusting the game’s major systems. It is 
important to periodically run diagnostics to improve and maintain game performance and player satisfac-
tion. 
Use the Volume Up or Volume Down button to highlight the desired Diagnostic Menu option and press the 
Test button to enter. 
MONITOR SET-UP
To verify color clarity of the monitor, select MONITOR SETUP at the Main Menu.
 
Use the Volume Up or Volume Down button to highlight the desired monitor setting and press the Test but-
ton. Watch for the following results on-screen during this test.
Main Menu, continued
Diagnostics Menu
DIAGNOSTICS
MONITOR SETUP
SYSTEM INFORMATION
SOUND SUBSYSTEM
DISK TESTS
SWITCH TESTS
DIP SWITCH TESTS
LAMP AND LED TESTS
WHEEL FORCE FEEDBACK TEST
CONTROL TEST
SPEAKER TEST
LINK TEST
EXIT
Main Menu
Diagnostic Menu, continued
Monitor Setup
MONITOR SET-UP
COLOR BARS
CROSS HATCH
RED SCREEN
BLUE SCREEN
GREEN SCREEN
WHITE SCREEN
BLACK SCREEN
50% GRAY SCREEN
25% GRAY SCREEN
EXIT 
						

							4MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
COLOR BARS.
 Observe 4 color bars in different shades appear on-screen as aids in adjusting the green, 
blue, and red color levels. Each color should appear sharp and clear. Check video brightness and contrast.
The CROSSHATCH PATTERNS
 test fills the screen with a series of dots within a grid. Observe the dots 
are perfectly round and that both the grid and dots are clear. Inspect monitor convergence, linearity, and 
screen size.
The single color screens, RED SCREEN, BLUE SCREEN, GREEN SCREEN
, etc., fills the screen with a 
single color to be observed for complete saturation and clarity. 
If any of the tests show a need for CRT adjustment, use the proper knobs on the Monitor Controls board.
SYSTEM INFORMATION
To verify game serial number and date code select System Information at the Main Menu. Use the Start 
button or Test button to exit this menu screen.
TYPICAL SYSTEM INFORMATION SCREEN
SOUND SUBSYSTEM TEST
To Verify proper operation of the sound electronics select Sound Subsystem Test at the Main Menu.
Observe the following information on the screen.
Main Menu
Diagnostic Menu, continued
Monitor Setup, continued
Main Menu
Diagnostic Menu, continued
System Information
SYSTEM INFORMATION
MIDWAY AMUSEMENT GAMES, LLC
MC VEGAS SYS
SERIAL NUMBER 022373
GAME: XXX
DATE OF MANUFACTURE:09/09/99
PRESS START TO EXIT
Main Menu
Diagnostic Menu, continued
Sound Subsystem Test 
						

							C.A.R.T. FURY5
CHAPTER 2 DIAGNOSTICS
DISK TESTS
To verify hard disk drive information and perform tests, select Disk Test at the Main Menu. Use the Volume 
Up and Volume Down buttons to highlight an item. Use the Test or Start button to select an item.
Select DISK INFORMATION
 to learn information about the IDE disk drive.
Select SEQUENTIAL
 READ
 to view the sequential sector read without the cache.
Select SEQUENTIAL
 CACHE
 READ
 to view the sequential sector read with the cache.
Select RANDOM
 READ
 to view the random sector read without the cache.
Select RANDOM
 CACHE
 READ
 to view the random sector read with the cache.
Select DATA
 INTEGRITY
 TEST
 to perform a disk data integrity test.
Select FILE
 SYSTEM
 CHECK
 to test the integrity of files on the disk.
Select SURFACE
 SCAN
 to perform a scan of the disk’s surface. 
Main Menu
Diagnostic Menu, continued
Sound Subsystem Test, continued
SOUND SUBSYSTEM TEST
BOOT VERSION D1.06
SDRC VERSION 5A
PORT STATUS GOOD
CHECKSUM EC40
SRAM OK
DRAM OK
TONE STATUS GOOD
OS VERSION 2.42
PRESS TEST OR START TO EXIT
Main Menu
Diagnostic Menu, continued
Disk Tests Menu
DISK TESTS
DISK INFORMATION
SEQUENTIAL READ
SEQUENTIAL CACHE READ
RANDOM READ
RANDOM CACHE READ
DATA INTEGRITY TEST
FILE SYSTEM CHECK 
SURFACE SCAN
EXIT 
						

							6MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
SWITCH TESTS
To verify proper operation of switch and button inputs in the game, select Switch Test at the Main Menu. 
Use the Volume Up or Volume Down button to highlight the Switch Test option and press the Test button to 
access it. Press any switch on the control panel or coin door to cause the corresponding indicator on the 
screen to illuminate. Each illuminated square represents one completed switch circuit.
DIP SWITCH TEST
To verify the functionality of both 8-position DIP switches on the CPU Board, select DIP SWITCH TEST at 
the Main Menu. Observe immediate on-screen results by changing the setting on a switch.
Use the Volume Up or Volume Down button to highlight the DIP Switch Test option and press the Test but-
ton to access it. The current settings appear on-screen. Consult the table on the next page to determine if 
changes are required. The default switch positions are all OFF for standard operation.
A vertical bar next to the switch position column indicates a common switch function.
Main Menu
Diagnostic Menu, continued
Switch Tests Menu
SWITCH TESTS
VIEW 1 X
VIEW 2 X
VIEW 3 X
BOOST X
GEAR 1 X
GEAR 2 X
GEAR 3 X
GEAR 4 X
LEFT COIN X
RIGHT COIN X
P1 START X
SLAM TILT X
TEST X
SERVICE CREDIT X
CENTER COIN X
EXTRA COIN X
VOL DOWN X
VOL UP X
BILL VALID. X
PRESS VIEW 1 AND VIEW 2 TO EXIT
Main Menu
Diagnostic Menu, continued
DIP Switch Test 
						

							C.A.R.T. FURY7
CHAPTER 2 DIAGNOSTICS
TYPICAL DIP SWITCH SCREEN
Setting Table for DIP Switch U13
DIP SWITCH SETTING FOR COINAGE 
There are many ways to select the type and quantity of currency recognized by the game machine.
1. The most common coin combinations for several countries are pre-programmed and may be selected 
from the table when Standard Pricing is activated (see Game Adjustments).
2. DIP Switch settings may be changed with the power switched on. Set any switch and then observe the
screen to verify that the desired selection is enabled. NOTE: 
If CMOS Coin Settings are active, switch
settings for an individual Country will have no effect.
3. Some European countries may accept currency used in other countries. The most popular coinage
settings are listed beneath in the Pricing Table.
Main Menu
Diagnostic Menu, continued
DIP Switch Test, continued
DIP SWITCH TEST
DIP SWITCH U13
8 OFF UNUSED
7 OFF UNUSED
6 OFF USA 1
5 OFF USA 1
4 OFF USA 13...
3 OFF USA 13...
2 OFF USA 13...
1 OFF DIP COINAGEDIP SWITCH U12
8 OFF GAME MODE
7 OFF UNUSED
6 OFF BRAKE ENABLED
5 OFF UNUSED 
4 OFF UNUSED 
3 OFF UNUSED 
2 OFF UNUSED 
1 OFF UNUSED 
PRESS ANY BUTTON TO EXIT
FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
DIP COINAGE
CMOS COINAGE OFF
ON*
OFF*
OFF
ON
ON
OFF
OFF
ON
ON
ON 
USA 13 GER1 FR ECA1 UK1 ECA
USA 11 GER2 FR ECA2 UK2 ECA
USA 10 GER3 FR ECA3 UK3 ECA
USA 1 GER4 FR ECA4 UK4
USA DC8 GER5 FR ECA5 UK5
USA DC6 GER ECA1 FR ECA6 UK6 ECA
USA DC5 GER ECA2FR ECA7 UK7 ECA
USA DC1 GER ECA3 FR ECA8 
FREE PLAY (UK)OFF*
ON
OFF
ON
OFF
ON
OFF
ON
ONOFF*
OFF
OFF
OFF
ON
ON
ON
ON
ON
USA 
FRANCE
GERMANY
UK**OFF*
ON
OFF
ONOFF*
OFF
ON
ON 
						

							8MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
Setting Table for DIP Switch U12
(Factory default settings in boldface type)
LAMP & LED TESTS
To verify the proper operation of lamps and LED’s, select the LAMP & LED TESTS at the Main Menu. 
Use the Volume Up or Volume Down button to highlight Lamp & LED Test and press the Test button. Dur-
ing the test observe the selected lamp(s) switches turn on or off when the corresponding selection is made.
Main Menu
Diagnostic Menu, continued
DIP Switch Test, continued
FUNCTION SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
UNUSED OFF
ON  
UNUSED
 OFF
ON
UNUSEDOFF
ON
UNUSEDOFF
ON
UNUSEDOFF
ON
BRAKE ENABLED
BRAKE DISABLEDOFF
ON
UNUSEDOFF
ON
GAME MODE
TEST MODE  OFF
ON
Main Menu
Diagnostic Menu, continued
Lamp and LED Tests 
						

							C.A.R.T. FURY9
CHAPTER 2 DIAGNOSTICS
LAMP TESTS
To detect intermittent or faulty incandescent bulbs, select LAMP TEST at the Main Menu. This test ensures 
that the incandescent bulbs critical to game operation function properly. 
Use the Volume Up or Volume Down button to highlight Lamp Test and press the Test button. During the 
test observe the Lamp(s) turn ON according to the option selected.
LED TESTS
To verify that the LED’s function properly, select LED TEST at the Main Menu. This test allows you to con-
trol and test the illumination of the LED’s located on the dash PCB.
Use the Volume Up or Volume Down button to highlight LED Test and press the Test button. During the test 
observe the LED’s turn ON. 
Main Menu
Diagnostic Menu, continued
Lamp and LED Tests, continued
Lamp Tests
LAMP TEST
PRESS VIEW 1 TO LIGHT PREVIOUS LAMP
PRESS VIEW 2 TO LIGHT NEXT LAMP
PRESS VIEW 3 TO LIGHT ALL LAMPS
START LAMP OFF
VIEW 1 LAMP OFF
VIEW 2 LAMP OFF
VIEW 3 LAMP OFF
BOOST LAMP OFF
PRESS TEST OR START TO EXIT
Main Menu
Diagnostic Menu, continued
Lamp and LED Tests, continued
LED Tests
LED DISPLAY TESTS
ALL LED’S ON THE DISPLAY SHOULD BE ON
PRESS TEST OR START TO EXIT 
						

							10 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
WHEEL FEEDBACK TEST
To verify the proper directional movement of the steering wheel, select Wheel Feedback Test at the Main 
Menu. Make sure hands and other objects are clear of the steering wheel when this test is selected 
because the steering wheel automatically rotates on its own. 
Use the Volume Up or Volume Down button to highlight Wheel Feedback Test and press the Test button. 
Observe and follow the on-screen instructions for conducting the test. During the test observe the steering 
wheel is turned automatically. Upon completion of the test, the message TEST COMPLETE appears on-
screen. Press the Test or Start button to exit test once this message appears.
CONTROL TEST
To verify the presence of steering wheel control, gas pedal and brake pedal control, select Control Test at 
the Main Menu.
Use the Volume Up or Volume Down button to highlight Control Test and press the Test button. During the 
test observe the selected control input or switch turns on or off when the corresponding selection is made. 
NOTE: 
Information regarding the brake pedal will not appear if DIP 6 on DIP Switch U12 
is ON.
Main Menu
Diagnostic Menu, continued
Wheel Feedback Test
WHEEL FEEDBACK TEST
CAUTION: WHEEL IN MOTION
PRESS VIEW 1 TO START TEST
PRESS TEST OR START TO EXIT
Main Menu
Diagnostic Menu, continued
Control Test
CONTROL TEST
WHEEL XX
BRAKE PEDAL XX
GAS PEDAL XX
SWITCHES
GEAR OFF
BOOST OFF
VIEW 1 OFF
VIEW 2 OFF
VIEW 3 OFF
PRESS TEST OR START TO EXIT 
						

							C.A.R.T. FURY11
CHAPTER 2 DIAGNOSTICS
SPEAKER TEST
To verify proper operation of the sound components, select Speaker Test at the Main Menu. This test 
allows you to access and listen to the sound emitted from the speakers used in the game. 
Use the Volume Up or Volume Down button to highlight the Speaker Test option and press the Test button. 
Use the Volume Up or Volume Down button to highlight an option within the test itself and press the Test 
button to activate the test option.
LINK TEST
To verify communications between the game machine and others connected to it, select Link Test at the 
Main Menu.
Use the Volume Up or Volume Down button to highlight Link Test and press the Test button. This test runs 
automatically and will display results on-screen. 
Press the Test button to exit from this menu screen.
Main Menu
Diagnostic Menu, continued
Speaker Test
SPEAKER TEST
FRONT CHANNEL
CENTER CHANNEL
REAR CHANNEL
100HZ TONE
1KHZ TONE
PLAY TUNE
EXIT
Main Menu
Diagnostic Menu, continued
Link Test
LINK TEST
NETWORK HARDWARE:   OK
GAME LINK NUMBER:   1
SERIAL NUMBER:   022373
NET VERSION:   0909
LOOPBACKS PASSED:   0
LOOPBACKS FAILED:   0
GAMES ON NETWORK
GAME LINK NUMBER: X       
SERIAL NUMBER: X       
NET VERSION: X
PRESS TEST OR START TO EXIT 
						

							12 MIDWAY AMUSEMENT GAMES, LLC 
CHAPTER 2 DIAGNOSTICS
AUDITS
Press the Volume Up or Volume Down button to highlight Game Audits in the Main Menu and press the 
Test button. To move between pages in an Audit Table, press the View 1/Volume Up or View 2/Volume 
Down button. Press the Test or Start button to return to the Main Menu from this screen.
The Game Audits Table displays the play statistics. The left side of the table names the Audit item; the right 
side shows the amount of play. Record these statistics before any service or repairs are done.
COIN AUDITS
To keep track of the number of coins collected, press the Volume Up or Volume Down button to highlight 
Coin Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press 
the View 1/Volume Up or View 2/Volume Down button. Press the Test or Start button to return to the Main 
Menu from this screen. 
AUDIT TABLE, PAGE 1 
Main Menu
Game Audits
AUDITS
COIN AUDITS
CREDITS AUDITS
GENERAL GAME AUDITS
PLAYER SELECTION AUDITS
TRACK AUDITS
EXCEPTION DUMP
CLEAR AUDITS
EXIT
Main Menu
Audits, continued
Coin Audits
COIN AUDITS
LEFT SLOT COINS 
RIGHT SLOT COINS
BILLS 
CENTER SLOT COINS 
EXTRA SLOT COINS 
GAME STARTS
SERVICE CREDITS
TOTAL PAID CREDITS 
TOTAL 
PRESS TEST OR START TO EXIT