Home
>
Midway
>
Games
>
Midway Cruis N Exotica Operations Manual For 39 Dedicated Game With Motion Seat
Midway Cruis N Exotica Operations Manual For 39 Dedicated Game With Motion Seat
Here you can view all the pages of manual Midway Cruis N Exotica Operations Manual For 39 Dedicated Game With Motion Seat. The Midway manuals for Games are available online for free. You can easily download all the documents as PDF.
Page 62
Service - 18 MOTION SEAT SERVICE Due to the weight of the seat pedestal assembly and the complexity of installation, servicing the seat requires special consideration. Observe all safety precautions and carefully read instructions thoroughly prior to performing a service procedure. Electrical Service Instructions The basics of servicing the Electrical Components… ¾ Switch off power to the game machine and seat assembly and unplug the AC line cords for both. ¾ Unlock and remove the rear door on the main...
Page 63
Service - 19 To service the H-Bridge Board Assembly… Refer to the Electrical Components Service illustration. ¾ Switch off power to the game machine and seat assembly and unplug the AC line cords for both. ¾ Expose the electrical component housing. Refer to the Basics of Electrical Components service instructions. ¾ Remove the hex head screws used to fasten the encoder junction plate and motor junction plate to the electrical housing. ¾ Lift up the encoder junction plate. Label and disconnect wiring....
Page 64
Service - 20 Mechanical Service Instructions The basics of servicing the Mechanical Components… ¾ Switch off power to the game machine and seat assembly and unplug the AC line cords for both. ¾ Remove all 4 of the tamper resistant screws used to fasten the rear door panel to the pedestal. ¾ Lift door panel off and set aside with hardware until reinstallation. ¾ Remove the interlock switch if servicing the motor, cam or encoder located on the right-hand side. Remove both hex head screws used to fasten...
Page 65
Service - 21 To service a Motor… Refer to the Motor and Encoder Service illustration. ¾ Switch off power to the game machine and seat assembly and unplug the AC line cords for both. ¾ Expose the motor cage. Refer to the Basics of Mechanical Components service instructions. ¾ Remove the nuts and split washers used to fasten the roller assembly to the top plate support. ¾ Loosen the socket head screw in the center of the roller assembly. Slide the roller assembly off of the cam on the motor and set it...
Page 66
Service - 22 To service an Encoder… Refer to the Motor and Encoder Service illustration. ¾ Switch off power to the game machine and seat assembly and unplug the AC line cords for both. ¾ Refer to the Basics of Mechanical Components service instructions. ¾ Remove the nuts and split washers used to fasten the roller assembly to the top plate support. ¾ Loosen the socket head screw in the center of the roller assembly. Slide the roller assembly off of the cam on the motor and set it aside. ¾ Remove 6...
Page 67
Service - 23 To service the Plastic Shroud… Refer to the Shroud and Gasket Service illustration. ¾ Switch off power to the game machine and seat assembly and unplug the AC line cords for both. ¾ Remove 3 tamper resistant screws from each side of the seat slide mounting plate. Lift the seat and mounting plate assembly off the pedestal and set aside. ¾ Remove the 26 screws used to fasten the metal retainer and rubber gasket to the bottom edge of the plastic shroud. Set the hardware and metal retainer...
Page 68
Service - 24 To service the Molded Seat Assembly… The Seat Assembly includes the pedestal base. Refer to the Seat Pedestal Service illustration. ¾ Switch off the power to the game machine and unplug the AC line cord. ¾ Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting plate assembly off the pedestal until the wiring is exposed. ¾ Disconnect the speaker cable and lift the seat the rest of the way up from the pedestal. ¾ Place the seat on its back,...
Page 69
WARNING USE OF NON-MIDWAY PARTS OR CIRCUIT MODIFICATIONS MAY CAUSE SERIOUS INJURY OR EQUIPMENT DAMAGE! USE ONLY MIDW AY AUTHORIZED PARTS. • For safety and reliability, substitute parts and modifications are not recommended. • Substitute parts or modifications may void EMC directive or FCC type acceptance.
Page 70
Parts - 2 Cabinet Front View 04-1063501-15090 04-12690-2 31-3463.1 04-12760-2 04-12760-1 01-14889 01-14522 03-9948 08-8016 5675-15773-0008-8383 A-22506 OTHER ASSEMBLIES DASH CABINET SPEAKER, 6.5 5555-16059-00 SPEAKER GRILL 01-13980 Motion Pedestal Assembly OTHER ASSEMBLIES CASTER ASSEMBLY A-232364701-00005-00 4320-01124-16 4700-00033-00 4700-00075-00B 4701-00005-00 04-12959 4320-01123-36B 04-12640.10