Metz Talio 37 Lcd Operating Instructions
Have a look at the manual Metz Talio 37 Lcd Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 23. Station Logo With the aid of the VPS signal, a station logo with a maximum length of 15 characters is automati- cally assigned to each station. If this automatic assignment does not work, or if you want to use a different logo, you can change the setting manually. Setting the station logo • Press the MENU key. • Press the white key to open the “station table”. • Press the F2key to enable editing of the station table. • Select the programme position whose logo you wish to change. • Press the cursor control key to move to the other column. • Use the corresponding numeric key (in the example: ) to select Logo input. • The various letters and digits can be selected with the aid of the cursor control key . • You can delete single characters with the red key or the complete logo with the IIkey. • Set the desired logo by repeatedly pressing the various numeric keys. The lowercase letters are displayed after the uppercase letters. • Press the OK key to save the new logo. • Press the EXIT key to close the TV menu. Opening the menu MENU F2 EXIT 0010Hessen 30009Südwest0008MDR0007PRO 70006RTL 20005RTL0004SAT 10003Bayern 30002ZDF 0001ARD &_ , ;ABC DEF GHIJKL%MNO MDR PQRS TUVWXYZ :clear all :delete character:select position :save :abort Sound corrections Colour standard Picture quality Picture correct. Enter logo Station contained in EPGFrequency/channel F1➔ OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. OKMENU – +
62 24. Sorting Stations You can move, copy and delete individual stations or groups of stations within the station table. Moving, copying and deleting stations • Press the MENU key to open the TV menu. • Press the white key to open the station table. • Use the cursor control keyto select the pro- gramme position which is to be moved, copied or deleted. You can also mark a contiguous block of positions by moving the cursor to the programme position at the end of the block. • Briefly press the OKkey to mark the programme position (in the example: position 008). Press and hold the OKkey to mark all programme positions in the previously selected block. • To copy this programme position, use the cursor to select the programme position before or after which the selected station is to be inserted. If the station(s) you have selected were pre- viously in programme positions with lower numbers than the insertion position, they are inserted before this position; if they previously had higher numbers, they are inserted after this position. • To move the selected station(s), select the programme position to which the station(s( is/are to be moved. • Use the -+ key to copy (+) or move (-) the sta- tion(s). • To delete a station, press the llkey. • Press the EXIT key to close the TV menu. Opening the menu MENU OK 0010Hessen 30009Südwest0008MDR0007PRO 70006RTL 20005RTL0004SAT 10003Bayern 30002ZDF 0001ARD 0020BR alpha00193 SAT0018Kinderkan.0017FRANKEN0016TELE-500159LIVE0014SuperRTL0013Kabel 10012VOX 0011West 3 Moving, copying, deleting: Select station with (hold down to select a block)Select new position with the cursor :move/copy, :delete : select :edit programme attributes or station list. F1➔ OK EXIT – +II F2
63 25. Registering AV DevicesOpening the menu MENUAV(audio/video) devicesare external devices which deliver video and/or audio signals (such as video recorders, DVD players, DVD recorders, etc.) and which can be connected to TV sets. All commonly available AV devices are listed in the menu AV devices. Note that you must always connect AV devices exactly as shown in the connection diagram in the TV menu of your TV set ! SVHS/Hi8 and Data Logic video recorders must always be connected to the EURO1 socket of the TV set. In the factory, the EURO1 socket is programmed for a video recorder and the EURO2 socket is programmed for a DVD player. Registering an AV device on the TV set • Press the MENU key to open the TV menu. • Press the yellow key to open the menu AV devices. • Use the cursor control key to select the AV device you wish to register and press the OK key. • Press numeric key !and use the -+ key to select the appropriate signal types (OUT/IN) for this device and press OK to confirm your selection. For details of the signal types, see page 66 and the operating instructions for the AV device being connected. • If desired, press numeric key , enter a diffe- rent name for this AV device and press OK. • Use the cursor control key to select Connect and press the OK key. Then connect the AV device to the corresponding EURO socket. i DataLogic Name Signal types Connect Other device 3 Other device 2 Other device 1 PC Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 Connect as follows: DVD/Videorec.1 CVBS CVBS EURO1:select :connect and clear..OK ✗ VCR➔➔ Caution! Connection of a new device may cau- se an existing connec- tion diagram to be changed. If so, you must reconnect the AV devices accordingly. OK OK EXIT F1➔
64 Data Logic video recorder Data Logic is a system which provides a dialo- gue between a TV set and a video recorder. This intelligent system offers the features such as: - Automatic transfer of the settings for terrestrial or cable TV stations (not DVB) to the video recorder. - Immediate recording - the video recorder records the programme currently displayed on the TV screen. - Automatic switching to the AV programme posi- tion. - Direct control of the video recorder from the timer menu of the TV set. - Automatic switching off of the video recorder when the TV set is switched to the standby state. In the menu AV devices check Xto the left of the field Data Logic for Video recorder 1 and connect the video recorder to the EURO1 socket. Data Logic will function correctly only if the AV-1 socket on the video recorder is con- nected to the EURO 1 socket on the TV set. Comparable dialogue systems are: QLink (Pan- asonic), EasyLink (Philips), Megalogic (Grundig), SMARTLINK (Sony). Registering a Data Logic video recorder on the TV set • Press the MENU key to open the TV menu. • Press the yellow key to open the menu AV devices. • Use the cursor control key to select the AV device to be connected and press the OK key. 25. Registering AV Devices Data Logic i Opening the menu This menu item is not avai- lable in a 2 ** menu. MENU OK Other device 3 Other device 2 Other device 1 PC Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 Connect as follows: CVBS VBS DVD/Videorec.1 CVBS EURO1:select :connect and clear.OKVCR➔➔ F1➔ DataLogicActivate TV-SPDIF-inpName Signal types Connect ✗ ✗
65 25. Registering AV Devices Data Logic Opening the menu • Press numeric key !, use the - +key to select the correct signal types (OUT/IN) and press the OK key. (See also the operating instructions of the AV device.) • If desired, press numeric key , enter a new name for the AV device and press the OK key. • Use the cursor control key to select Data Logic and press the OK key. • Use the cursor control key to select Connect and press the OK key. Then connect the AV device to the corresponding EURO socket. Data Logic: transferring the station table • Press the MENU key to open the TV menu. • Press the red key to open the menu Confi- guration. • Press numeric key to select Analogue TV. • Press the OK key and then press numeric key !to select Data Logic. • Press the OK key to transfer the pro- gramme positions from the TV set to the video recorder. OK EXIT Data Logic Terr. station search Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Start data transfer Programme position --- Change with Start data transfer with F1➔ OK MENU OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. – +
66 The signal type always refers to the input and output of the AV device. Some AV devices may use a composite video sig- nal (FBAS) for recording and playback operations and an RGB signal for displaying their menus. It is not possible to make a general statement in this respect. The operating instructions of the AV device concerned may provide some indication. If you connect such an AV device with the signal type composite video (FBAS) and recordings are played back correctly, but you cannot see the menu of the AV device, you must change the sig- nal type in the menu AV devices to RGB. Setting the signal type • Press the MENU key to open the TV menu. • Press the yellow key to open the menu AV devices. • Use the cursor control key to select the AV device whose signal type you wish to change and press the OK key. • Press numeric key !, use the cursor control key to select Signal OUT, and use the - +key to change the set- ting to RGB. • Press the OK key to confirm your selection. • Press the EXIT key to close the TV menu. Caution ! This may cause an existing con- nection diagram to be modified. If so, you must reconnect the AV devices accordingly. 25. Registering AV Devices Setting signal types RGB MENU Other device 3 Other device 2 Other device 1 PC Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 Signal IN CVBS Signal OUT RGB Change with Accept value with OK OK OK EXIT Opening the menu The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. – + F1➔ DataLogicActivate TV-SPDIF-inpName Signal types Connect ✗ ✗
67 25. Registering AV Devices Setting signal types DVI/HDMI The signal type always refers to the input and output of the AV device. AV devices equipped with a DVI or HDMI socket can be connected to the LCD TV with the aid of a DVI or HDMI cable, respectively. The connected device must be registered in the menu AV devices with Signal OUT set to DVI or HDMI, as applicable. Connection via a DVI or HDMI interface permits digital transfer of the picture signal from the device to the TV set. The sound signal must be connected with an addi- tional Cinch or optical (Toslink) audio cable. Setting the signal type DVI or HDMI • Press the MENU key to open the TV menu. • Press the yellow key to open the menu AV devices. • Use the cursor control key to select the AV device whose signal type you wish to change and press the OK key. • Press numeric key !, use the cursor control key to select Signal OUT, and use the - +key to change the set- ting to RGB. • Press the OK key to confirm your selection. • Press the EXIT key to close the TV menu. Other device 3 Other device 2 Other device 1 PC Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 Signal IN CVBS Signal OUT HDMI Change with . Accept value with . OK – + F1➔ DataLogicActivate TV-SPDIF-inpName Signal types Connect ✗ ✗
68 25.1 Removing AV DevicesOpening the menu MENU OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. OK This menu item is not available in a 2 ** menu. If desired, you can change the factory settings for AV devices (a video recorder on the EURO1 socket and a DVD player on the EURO2 socket). Removing an AV device from the TV set • Press the MENU key to open the TV menu. • Press the yellow key to open the menu AV devices. • Use the cursor control key to select the device you wish to remove and press the OK key. The cursor is on the line Connect. • Press the OK key again. A message is displayed, asking if you really want to change the connected device. • Press the OKkey again to remove the connected device. • Press the EXIT key to close the TV menu. Other device 3 Other device 2 Other device 1 PC Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 Connect as follows: DVD/Videorec. 1VCR F1➔ :select :connect and clear..OK DataLogicActivate TV-SPDIF-inpName Signal types Connect ✗ ✗
69 You can define an initial programme position in this TV set. This initial programme position is used primarily to select the AV programme position if you use an external receiver. Setting the initial programme position This menu item is not available in a 2 ** menu. Select a receiver (satellite or set-top box) in the menu AV devices and connect the receiver to the TV set (see also Section 25, Registering AV Devi- ces). • Press the AV key. • Use the numeric keys to select the position Sat/Set-top in the AV menu. • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Use the cursor control key to select Operation and then Initial pro- gramme position. • Press the OK key and, in the setting window, use the -+ key to select Yes. • Press the OK key to save the new setting. • Press the EXIT key to close the TV menu. The AV programme position will now be selected automatically when you switch on the TV set with the main power switch. 26. Initial Programme PositionOpening the menu MENU OK OK OK EXIT EPG settingsDisplay configuration2) Operating Sound settings HiFi output 2) Init. prog.position Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Switch on with this station? Yes Change with Accept value with F1➔ – + OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 2) Possible only on sets equipped with this function.
70 MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 27. Sound via HiFi Amplifier HiFi output On the rear of the TV set, you will find audio sockets and a digital audio-out socket (see page 79) which can be used to connect the TV set to a HiFi system (HiFi amplifier). Settings need to be made in the menu items HiFi output and Sound settings only if the TV set is connected to a HiFi system. If you want adjust the sound settings exclusively on the HiFi system, you must set the HiFi output to constant. You can then no longer adjust the volume and tone with the Metz remote control. The mute function remains active. If you want to be able to change the sound settings with the Metz remote control, you must set the HiFi output to variable. Setting the HiFi output • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Use the cursor control key to select Initial programme position. • Use the corresponding numeric key (in the example: !) to select HiFi output. • In the setting window, use the -+ key to set the desired parameters. • Press the OK key to save the new settings. • Press the EXIT key to close the TV menu. In normal TV Mode, the function Sound via... can be activated temporarily by pressing the yel- low key and using the -+ key. Opening the menu OK EXIT EPG settingsDisplay configuration2) Operating Sound settings HiFi output 2) Init. prog.position Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating HiFi output constant Output level 50% Change with Accept value with F1➔ – + OK