Metz Talio 37 Lcd Operating Instructions
Have a look at the manual Metz Talio 37 Lcd Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 18. Special Functions Direct recording of a programmeOpening the menu If you wish to record the programme you are cur- rently watching, you can start a direct (one-touch) recording to make the current programme availa- ble to a recording device connected to the EURO sockets. Starting a direct recording: • Press the F2key. If you press F2briefly, the function programmed for F2 (see Section 18.1, Programming the Function keys) is executed. If you hold down F2for about two seconds, all possible selections are displayed. • Press numeric key to open the timer menu window. The timer menu window displays the programme position, the date and the EPG data for the current programme or for the next two hours. • If there is more than one AV device connected to your TV set, use the cur- sor control key to select the propo- sed recording device and use the -+ key to select the desired device. • Press the OK key to save the settings. On the recording device (e.g. video recor- der), select the AV programme position and start the recording by pressing the appropri- ate button (REC, OTR, etc.). Recording Yes Reminder No Pr 6 SAT 1 Date 01.05. Start 22:45 End 23:40 VPS no Recording device Videorecorder Change with :select :save the timer OK F2 – +
42 Adjusting the picture format: • Briefly press the F3key to open the window with special picture functions. • Press numeric key to select the function Picture format menu. • Use the P+/P- rocker key to select the desired function. After selection of a picture format, you can also adjust the zoom setting by pressing the -+ key within five seconds. • The settings made here (except for the automatic zoom set in the TV menu) remain active until you switch to a dif- ferent programme position or switch off the TV set. Zoom / Picture position After selecting the function Zoom, you can adjust the zoom factor with the -+key. In addition, you can move the picture position 4)up and down on the screen in order, for example, to keep the station logo or the subtitles visible. To change the picture position, press and hold the F3 key until the selection is displayed. Then press numeric key and use the P+/P- rocker key to move the picture. Standard 4:3 This is the standard setting for all programmes in the 4:3 picture format. Panorama With the aid of the panorama function, you can expand programmes broadcast in 4:3 format to fill the screen of a 16:9 TV set. The picture is expanded uniformly in the horizontal direction. You can also zoom the picture. The panorama function can be activated and deactivated in the menu item General picture settings of the menu Picture and sound. 16:9 Full picture This function serves to display pictures from exter- nal devices (such as a 16:9 video recorder) with the correct aspect ratio. 18. Special Functions Picture format Opening the menu F3 16:9 full picture+ Zoom Standard 4:3 — Standard 4:3 + Panorama 16:9 full picture— Panorama + 16:9 full picture Zoom —
43 If desired, the picture can be shifted up or down in order, for example, to make subtitles visible or to hide ticker displays. Adjusting the picture position: • Press the F3key until the window Special functions 3 appears on the screen. • Press numeric key !to select the function Picture position vertical. • You can now use the -+ key to move the picture up and down on the screen so that, for example, the station logo or the subtitles are visible. This setting is not saved. If you wish to save it as a global setting, use the procedure described in Section 11 to set it. 18. Special Functions Picture Position F3 Opening the menu Special functions 3 1Picture format 2Pic. form., vertikal
44 The remote control has four function keys: F1, F2, F3 and AV. You can programme these function keys with any of the available functions. If you press and hold any function key, a window with the available functions is displayed. The picture on the left shows the functions available for the F2 key. Programming function key F1, F2, F3 or AV with a function • Press the MENU key to open the TV menu. • Press the red key to open the Configura- tion menu. • Press and hold the F1key to display the availa- ble functions. • Use the cursor control key or the correspon- ding numeric keys to select the desired Func- tion for.. (in this example: F2). • Press the OK key and then use the cursor con- trol key to select one of the available functions. • Press the OK key to assign this function to the selected function key (the selected function is marked with X). • Press the EXIT key to close the TV menu. If a function key is programmed with a function, this function can be called by briefly pressing the function key. Pressing and hol- ding the function key displays a list of all available functions. 18.1 Programming the Function KeysOpening the menu F2 F2 MENU Special functions 2 1Normal/Speech 9Timer over view 0Direct recording Direct recording Timer overview Language of prog Normal/Speech Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Function for F2 Timer overview select save and clear.OK ✗ OK EXIT F1➔
45 In the menu Sound settings, you can activate a two-stage mute function. When this function is active, the volume in TV mode can be reduced in two stages with the mute key . Activating the mute function • Press the MENU key to open the TV menu. • Press the red key to open the Configura- tion menu. • Press the OK key to move to the right side of the menu. • Use the cursor control key or the corresponding numeric key (in the example: ( ) to select the menu item Sound settings. • In the setting window, use the -+ key to set the function Mute (2-stage) to On. • Press the OK key to save the setting. • Press the EXIT key to close the TV menu. In normal TV mode, the mute key is used as follows: • Press it once to reduce the volume by 12 scale divisions. • Press it again within five seconds to reduce the volume to 00. • Pressing the key once again restores the volume to its original level. 19. Sound Settings Mute Function Opening the menu EPG settingsDisplay configuration2) Operating Sound settings HiFi output 2) Init. prog.position Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Mute (two-stage) on Sound via Loudsp. Change with Accept value with F1➔ OK MENU OK OK EXIT – +
46 20. EPG EPGis an Electronic Program Guide containing programme information for all important stations. It is broadcast by various stations (in Germany by Kabel1 and RTL 2) and also includes the data for the other TV stations in the country. The TV set needs about 30 minutes to initially download the large amount of data. • On TV sets with two tuners, the EPG data are downloaded with the aid of the second tuner (see the next page). Once the data have been downloaded, the TV set stores the EPG in a spe- cial memory. The EPG in this memory is updated regularly, pro- viding the TV set is not switched off with the main power switch. • On TV sets with only one tuner: - the EPG programme position must remain selec- ted for at least 30 minutes, or - the data are downloaded at night (02:30 - 03:00) when the TV set is in standby mode. Not possible with an external receiver !
47 20.1 Activating the EPG The EPG function can be activated by briefly pres- sing the EPG key if an EPG programme position has been defined in the menu (see below). If no EPG programme position has been defined in the menu, the following applies. When any programme position on which EPG can be received is selected, the following is displayed after a short delay: The TV set is thus asking whether you want to use this station as the source for the EPG data. If you press any key other than the green key, this programme position is not used as the source of EPG data. The message will be displayed again on any other programme position where the EPG data are available. If you press the green key for Yes, this programme position will be used as the source for the EPG data. The messa- ge will not be displayed for any other programme positions. If you know which programme position provides EPG data, you can enter its number in the TV menu with the numeric keys. You can also overwrite an existing programme position number or clear it with the IIkey. Opening the menu MENU EPG Not possible with an external receiver ! EPG settingsDisplay configuration2) Operating Sound settings HiFi output 2) Init. prog.position Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating EPG YesEPG prog. position13 Kabel 1 Change with Accept value with F1➔ OK OK % The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Use this station as EPG station ? Ye s Any other key closes this window. – +
48 The Electronic Programme Guides are broadcast by several different stations, and the information is therefore presented in various layouts. You can thus choose between different EPGs with different appearances. • TV set with a single tuner: select the EPG programme position and leave it selec- ted for 30 minutes • TV set with two tuners: the TV set col- lects the EPG data with the aid of the second tuner. Special notes: All stations which are found by a station search are displayed in the station table and also listed in the EPG. Stations which carry two different programmes at diffe- rent times of the day must be stored in two programme positions (see Section 24). You can select which stations are to be lis- ted in the EPG. Normally, the data for all stations are col- lected and displayed. If you wish to exclu- de certain stations from the EPG, proceed as follows: • Press the MENU key to open the TV menu. • Press the white key to display the menu station table with the active pro- gramme position marked. • Press the F2key to enable editing of the station table. • Press the cursor control key to move to the subjects list. • Press numeric key !to delete the mark (x) at the beginning of the line Include station in EPG. • If you wish to exclude further stations from the EPG, use the cursor control keys to select each station and repeat the above step. The data collection operation is inter- rupted if: - the Teletext function is called; - a recording is programmed in the menu AV recording; - a timer recording” is active or will start within one hour; - the Teletext function Subtitles is acti- vated. If you switch the TV set to the standby state during the data-collection opera- tion, the green LED lights or EPG is displayed to indicate that data collection is still running. 20.2 Collecting EPG Data Not possible with an external receiver !
49 20.3 Using the EPG Once all of the EPG data have been collected, briefly pressing the EPG key displays the EPG with the current programme on the selected pro- gramme position highlighted. The following keys have special functions in EPG mode: Select a programme. View the selected programme or set a reminder for it. Scroll to earlier or later pro- grammes. 0-9 Enter a time for display of the programmes starting at or after this time. Back to the previous program- me of the selected station. Show all following programmes of the selected station. Forward to the following pro- gramme of the selected station. blue: Select all programmes. yellow: Programme selection on the basis of the selected user and his interests. white: User can set interests. green: Select user (father, mother, teenager, child). red: Make the selected programme available for recording (see page 51). EXIT: Back to the TV picture. + –: Scroll by days trough the EPG Opening the menu EPG Not possible with an external receiver ! OK EXIT F2 F3 F1
50 20.3 Using the EPG Selecting a programme and viewing or setting a reminder In the EPG, you can select a programme with the cursor control key. • Press the OK key in order to - view the programme if it is already running, or - set a reminder for it if it has not yet started. A green check mark is displayed after the start time. • Press the TEXT key to display and hide a des- cription of the programme. This may not be possible for some programmes. Setting a user profile By pressing the green key several times, it is possi- ble to set up the EPG for the current user (father, mother, teenager, child). Setting interests Each user can set up the EPG to reflect his or her special interests. • Press the white key . • Use the cursor control key or the cor- responding numeric key to select one of the subjects. • Use the cursor control key to move to the other side. • Use the cursor control key or the corresponding numeric keys to select one of the subjects and mark Xit by pressing the OK key. Up to nine subjects of interest can be mar- ked for each user. • You can delete a mark Xby pressing the OK key again. • Press the red key to save the selections. Opening the menu Not possible with an external receiver ! Arts Education Children/School Sport Leicure Shows Current affairs Feature film detectiv documentary football/soccer comedygame/quiz/contestmotor sports magazine tourism/travel winter sports Up to 9 subjects can be selected. ✗ ✗ winter sport water sport motor sport athletics team sport tennis/squash football/soccer sports magazin special events sport (general)✗