Metz Talio 37 Lcd Operating Instructions

							21
Opening the menu
MENU
F2
11.2 Picture Settings for 
Programme via Station Table
Individual picture settings for
programme position xy:
• Select the programme position whose picture
settings you wish to change.
• Press the MENU key.
The TV menu appears on the screen.
• Press the white key  . The station table is dis-
played with the currently active programme
position highlighted.
• Press the F2key to enable editing of
the station table.
• Press the cursor control key to move
to the subject side.
• Use the corresponding numeric keys
(in this example: 
for the picture
quality) to select the desired menu
items.
• In the setting window, use the cursor
control key to select the desired func-
tion.
• Use the 
-+
key to change the setting.
gen. means here that the new setting will
overwrite the related general picture setting (see
pages 18 and 20).
The individual settings made here which
differ from the general settings remain
saved.
• Press the OK key to save the new settings.
• Press the EXIT key to close the TV menu.

0010Hessen 30009Südwest0008MDR0007PRO 70006RTL 20005RTL0004SAT 10003Bayern 30002ZDF
0001ARD
Picture sharpnessgen. Noise reduction gen.
Colour offset 0
VCR off:select
:go to the 
settings.
Sound corrections
Colour standard
Picture quality
Picture correct.
Enter logo
Station contained in EPGFrequency/channel
OK
EXIT
OK
F1➔
 
						

							22
Opening the menu12. General Sound Settings
Some of the menu items are not available
in a 2 ** menu.
The sound settings volume, treble, bass, stereo
wide and spatial sound can be set generally for
all programme positions and saved as standard
values which can be recalled at any time by pres-
sing the OK key.
Opening the sound settings menu:
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key  . The menu 
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the corresponding numeric key
(in the example: 
) to select 
General sound settings.
• Use the corresponding numeric keys
to select the desired menu items in the
right-hand column.
• Press the OK key to open the selec-
ted menu item for editing.
• In the setting window, use the 
-+
key to change
the setting.
• Use the cursor control key to select the third
line Save as standard value.
• If you wish to save the new setting, use the 
-+
key to select Yes.
• Press the OK key to save the new settings as
standard values.
• Press the EXIT key to close the TV menu.
If the standard values do not provide satis-
factor y results for some programme posi-
tions, you can make different individual set-
tings for these positions. See sections 12.1.


MENU
Factory settings
Base width 4)
Spatial sound 4)
BalanceVolume headphonesBass
Treble
Volume control 
3)
SRS WOW 2) 3)
Volume
Sound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Volume40%Standard value35%Use as default value : Yes
Change with 
Accept current
value as default
value.
F1➔
OK
EXIT
 
–   +
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this func-
tion.
3) See glossary for an explanation.
4) Available only if SRS WOW is switched off
 
						

							23
12. General Sound Settings
Some of the menu items are not available
in a 2 ** menu.
Setting SRS-WOW 2)
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key . The menu Picture and
sound and the menu item General picture set-
tings are pre-selected.
• Press the numeric key 
to select General
sound settings.
• Use the corresponding numeric key
(in the example: 
) to select
SRS–WOW 2).
• In the setting window, use the 
-+
key
to change the setting.
• Press the OK key to save the chan-
ged setting.
• „Press the EXIT key to close the
TV menu.
If the SRS-WOW function is
active, the menu items stereo wide and
spatial sound are disabled.


Opening the menu
MENU
Base width3)
Spatial sound3)
Balance
Tone settings
Volume headphonesBass
Treble
Volume control
3)
SRS WOW2)3)
Volume
Sound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
SRS WOW2)on
Change with 
Accept value with.
F1➔
OK
EXIT
 
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
3) See glossary for an explanation.
4) Available only if SRS WOW is switched off
–   +
 
						

							24
Automatic volume correction
Some TV stations transmit their commercials at a
higher sound volume than that for the normal pro-
gramme. In order to save you from adjusting the
volume each time with the remote control, you can
activate automatic volume correction.
With this function active, there is little difference in
the volume levels for the normal programme and
the commercials.
The setting made here applies to all programme
positions.
Opening the volume correction
menu:
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key . The menu 
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the corresponding numeric key
(in the example: 
) to select Gene-
ral sound settings.
• Use the corresponding numeric key (in the
example: 
) to select Volume correction.
• In the setting window, use the 
-+
key to change
the setting.
• Press the OK key to save the new setting.
• Press the EXIT key to close the TV menu.
The function Volume correction in the
menu General sound settings does not
overwrite the function Volume correction
in the menu Sound settings for Pr....

Opening the menu12. General Sound Settings
MENU
OK
Base width 4)
Spatial sound 4)
Balance
Tone settings
Volume headphonesBass
Treble
Volume control 
3)
SRS WOW 2) 3)
Volume
Sound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Volume control    on
Change with 
Accept value with.
F1➔
EXIT
  
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
3) See glossary for an explanation.
4) Available only if SRS WOW is switched off
–   +
 
						

							25
12.1 Sound Settings for
Programmes via TV Menu
Opening the menu
Some of the menu items are not available
in a 2 ** menu.
Volume correction
Various TV stations broadcast their programmes
with different sound volumes. This volume diffe-
rence can be minimised by correcting the volume.
This adjustment remains active even if the stan-
dard sound values are recalled.
Adjusting the volume correction:
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key . The menu 
Picture and sound and the menu
item General picture settings are 
pre-selected.
• Use the corresponding numeric key (in
the example: 
) to select Sound set-
tings for Pr..
• Press the OK key and then, in the
setting widow, use the 
-+
key to change the set-
ting.
• Press the OK key to save the new settings.
• Press the EXIT key to close the TV menu.
Individual sound settings can also be made
in the station table. 

MENU
Forced mono
Tone settings
Volume correctionSound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Volume correction   -15
Change with 
Accept value with.
OK
EXIT
OK

OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
–   +
 
						

							26
12.1 Sound Settings for
Programmes via TV Menu
Opening the menu
Some of the menu items are not available
in a 2 ** menu.
Tone setting
The tone setting can be set to Normal or
Speech. The setting Speech should be used
primarily for stations which broadcast mainly pro-
grammes with a lot of speech, such as news sta-
tions. The setting Normal is better for music pro-
grammes.
Adjusting the tone setting :
• Press the MENU key.
The TV menu appears on the screen.
• Press the blue key . The menu 
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the corresponding numeric key
(in the example: 
) to select 
Sound settings for Pr..
• Use the corresponding numeric key (in the
example: 
!) to select 
Tone settings.
• In the setting window, use the 
-+
key to change
the setting.
• Press the OK key to save the new settings.
• Press the EXIT key to close the TV menu.
Individual sound settings can also be made
in the station table.

MENU
Forced mono
Tone settings
Volume correctionSound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Tone settings    Speech
Change with 
Accept value with.

OK
EXIT
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
–   +
 
						

							27
12.1 Sound Settings for
Programmes via TV Menu
Some of the menu items are not available
in a 2 ** menu.
Forced mono
It may happen that your TV set switches from
mono to stereo in the middle of a programme, alt-
hough no stereo sound is being transmitted. This is
generally caused by the local reception condi-
tions. If you activate Forced mono for the selec-
ted programme position, all programmes from this
station will be reproduced in mono.
Activating forced mono:
• Press the MENU key.
The TV menu appears on the screen.
•Press the blue key . The menu 
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the corresponding numeric key (in
the example: 
) to select Sound set-
tings for Pr..
• Use the corresponding numeric key (in the
example: 
) to select Forced mono.
• In the setting window, use the 
-+
key to change
the setting.
• Press the OK key to save the new settings.
• Press the EXIT key to close the TV menu.
Individual sound settings can also be made
in the station table.


Opening the menu
MENU
Forced mono
Tone settings
Volume correctionSound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Forced mono   on
Change with 
Accept value with.
 
OK
EXIT
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
–   +
 
						

							28
12.1 Sound Settings for Prog.
via the Station Table
Opening the menu
Some of the menu items are not available
in a 2 ** menu.
Making sound corrections:
• Select the programme position whose sound set-
tings you wish to change.
• Press the MENU key. 
The TV menu appears on the screen.
• Press the white key  . The station table is dis-
played with the currently active programme
position highlighted.
• Press the F2key to enable editing of
the station table.
• Use the cursor control key to move
to the subjects side.
• Use the corresponding numeric keys
(in this example: 
) for sound cor-
rections) to select the desired menu
items.
• In the setting window, use the cursor
control key to select the desired func-
tions.
The use of the 
-+
key to change the selected set-
ting. gen. means here that the new setting will
overwrite the general sound settings (see pages
24 and 26).
The individual settings made here, which
differ from the standard values, remain
saved.
Press the OK key to save the new settings.
Press the EXIT key to close the TV menu.

MENU
F2
0010Hessen 30009Südwest0008MDR0007PRO 70006RTL 20005RTL0004SAT 10003Bayern 30002ZDF
0001ARD
Volume correction 0 Tone settings gen.
Forced mono off: select
: go to the
settings.
Sound corrections
Colour standard3)7)
Picture quality
Picture correct.
Enter logo
Station contained in EPGFrequency/channel
OK
EXIT

OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
3) See glossary for an explanation.
5) Available only for DVB stations!
7) Available only for analogue stations!
 
						

							29
Opening the menu13. Colour Standard
Some of the menu items are not available
in a 2 ** menu.
Normally, your TV set will automatically detect the
colour standard (PAL, SECAM, NTSC, NTSC44,
PAL60, PALM or Pal N) transmitted by each sta-
tion. If this does not function correctly for some
programme positions, you can select the colour
standard manually.
The factory setting for the colour standard is
Automatic.
Setting the colour standard:
• Select the programme position for
which you wish to select the colour
standard.
• Press the MENU key.
The TV menu appears on the screen.
• Press the white key  . The station
table is displayed with the currently
active programme position highligh-
ted.
• Press the F2key to enable editing of
the station table.
• Press the cursor control key to move to the
subjects side.
• Use the corresponding numeric key (in the
example: 
#) to select Colour standard.
• In the setting window, use the 
-+
key to change
the setting.
• Press the OK key to save the new setting.
• Press the EXIT key to close the TV menu.

0010Hessen 30009Südwest0008MDR0007PRO 70006RTL 20005RTL0004SAT 10003Bayern 30002ZDF
0001ARD
Colour standard    Auto. mode
Sound corrections
Colour standard
Picture quality
Picture correct.
Enter logo
Station contained in EPGFrequency/channel
OK
EXIT
MENU
F2
#
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
3) See glossary for an explanation.
5) Available only for DVB stations!
7) Available only for analogue stations!
: select
: go to the
settings.OK
 
						

							30
Opening the menu14. Automatic Zoom
The menu item Automatic zoom is not
available in a 2 ** menu.
When the automatic zoom function is active, pro-
grammes in a widescreen format (such as pro-
grammes in 16:9) are expanded to fill as much of
the screen as possible.
If the function is inactive, the programmes are dis-
played in their original format.
Activating the automatic zoom 2)
• Press the MENU key. The TV menu appears on
the screen.
• Press the blue key  . The menu 
Picture and sound and the menu
item General picture settings are
pre-selected.
• Use the cursor control key to select
the menu item Brightness.
• Use the corresponding numeric key
(in the example: 
#) to select the
function Zoom/Panorama.
• Use the cursor control key to select
the menu item Automatic zoom.
• Use the 
-+
key to change the setting.
• Press the OK key to save the new setting.
• Press the EXIT key to close the TV menu.

Factory settingsZoom/PanoramaNoise reduction
Picture sharpness
Colour intensity
Contrast
Brightness
Sound set,.prog.pos
Sound settings, gen.
Pict.set.,prog.posn.
Pict. settings, gen.
Zoom value 2 Panorama Yes
Pan. mode Linear Automatic zoom on
Change with
Accept value with
MENU
OK
EXIT
#
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
–   +