Metz Puros 37 Ml Operating Instructions
Have a look at the manual Metz Puros 37 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 20.1 Activating the EPG Pressing the green key for yes activates the slot in order to receive NexTView. The message will not appear again. If you know the NexTView slot, you can also enter it using the numeric keys in the TV menu. You can overwrite existing programme slot num- bers or delete them with the IIkey. DVB-SI details To receive DVB-SI data, no slot in the TV menu is needed. Factor y EPG settings: • EPG NexTView & DVB-SI • NexTView programme slot - - - - • DVB-SI selection TV • Prog. selection in the chan- nel table all free slots*) *)In the menu, “retain” is dis- played, i.e. when you make an adjustment, this change is displayed in plain text after it is confirmed by selecting “OK” in the menu. “Retain” is then displayed in the menu as an indication that the previously confir- med setting has been retai- ned. In countries where NexTView data is unavailable, the menu setting should read “EPG DVB-SI” as illustrated. Not possible with an external receiver ! Opening the menu MENU OK # EPG NextView & DVB-SI Pr selection in stationtable NextViewprog. Kabel 1 retain DVB-SI selection TV Data Logic adjustm. EPG settings Operating Sound settings HiFi output 2) Init. prog.position AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Change with Accept value with .– +OK F1➔ EPG DVB-SI Pr selection in stationtableretain DVB-SI selection TV Data Logic adjustm. EPG settings Operating Sound settings HiFi output 2) Init. prog.position AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Change with Accept value with .– +OK F1➔ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 51
52 NexTViewdata8)is transmitted by various broadcasting organizations. DVB-SIdata is broadcast by each chan- nel corresponding to its own content. Information may therefore correspondin- gly vary. Switch on your TV, so that EPG data can be compiled and/or updated. While data is being compiled the green LED is lit. TV sets with one receiver unit: • If a NexTView slot8)has been set: Switch the TV to standby mode, using the mains key on your remote. • If no NexTView slot 8)has been set and only DVB-SI details can be received: switch the set to standby. After switching on the TV, data compilation will continue stop until it is switched to standby again. Special notes: The TV set’s channel table lists all availa- ble channels in the programme guide, provided you do not make another selection in the channel table menu. Channels broadcasting on a time-shared basis – e.g. arte/Kinderkanal – must be saved in separate programme slots (see 24). If you include all channels in the EPG, you won’t be able to see very far ahead. You can decide which channels should appear in the EPG programme guide. As a rule, the collection process gathers data for all free channels. The following options are available to exclude selected channels from the EPG programme gui- de: Solution 1: • Press the MENU key. The TV menu appears on the screen. • Press the white key . The menu channel table appears with the active programme slot selected. • Press F2 to permit editing of the chan- nel list. • Press to switch to the menu page. • Using and select “Include channel in EPG” and dedeselect rows marked (x) with OK. • To exclude other channels from the EPG programme guide, use andto select the channel and repeatthe procedure. 20.2 Collecting EPG data Not possible with an external receiver ! 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 52
53 Solution 2: • Press the MENU key . The TV menu appears on the screen. • Press the white key. The menu channel table appears with the active pro- gramme slot selected. • Follow the steps described under “24. Sort channels” to sort and save your favourite channels so that they appear at the top of the list, for example sort 1-50 and save them. • Select “EPG Settings” from the Confi- guration menu and under “Prog. select. in the channel table”, select “Channels 1-50” using the -+ key and save by pressing OK. The collection process will be halted if: - videotext is opened. - a recording has been programmed under AV Recording. - a preset recording is running or will begin in an hour. - the videotext subtitle function is active. If the TV is switched to standby during the collection process, the green LED will appear to indicate that the process is still running. 20.2 Collecting EPG data Not possible with an external receiver ! 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 53
54 20.3 Using the EPG Once all of the EPG data have been collected, briefly pressing the EPG key displays the EPG with the current programme on the selected pro- gramme position highlighted. The following keys have special functions in EPG mode: Select a programme. View the selected programme or set a reminder for it. Scroll to earlier or later program- mes. 0-9 Enter a time for display of the programmes starting at or after this time. Back to the previous programme of the selected station. Show all following programmes of the selected station. Forward to the following pro- gramme of the selected station. blue: Select all programmes. yellow: Programme selection on the basis of the selected user and his interests. white: User can set interests. green: Select user (father, mother, teenager, child). red: Make the selected programme available for recording (see page 57). EXIT: Back to the TV picture. + –: Scroll by days trough the EPG Opening the menu EPG Not possible with an external receiver ! EXIT F2 F3 F1 OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 54
55 20.3 Using the EPG Selecting a programme and viewing or setting a reminder In the EPG, you can select a programme with the cursor control key. • Press the OK key in order to - view the programme if it is already running, or - set a reminder for it if it has not yet started. A green check mark is displayed after the start time. • Press the TEXT key to display and hide a des- cription of the programme. This may not be possible for some programmes. Setting a user profile By pressing the green key several times, it is possi- ble to set up the EPG for the current user (father, mother, teenager, child). Setting interests Each user can set up the EPG to reflect his or her special interests. • Press the white key . • Use the cursor control key or the cor- responding numeric key to select one of the subjects. • Use the cursor control key to move to the other side. • Use the cursor control key or the corresponding numeric keys to select one of the subjects and mark Xit by pressing the OK key. Up to nine subjects of interest can be mar- ked for each user. • You can delete a mark Xby pressing the OK key again. • Press the red key to save the selections. Opening the menu Not possible with an external receiver ! Arts Education Children/School Sport Leicure Shows Current affairs Feature film detectiv documentary football/soccer comedygame/quiz/contestmotor sports magazine tourism/travel winter sports Up to 9 subjects can be selected. ✗ ✗ winter sport water sport motor sport athletics team sport tennis/squash football/soccer sports magazin special events sport (general)✗ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 55
56 20.3 Using the EPGOpening the menu Programme Information (Now Showing: ..) After switching to a channel, a box is displayed at the bottom of the screen as shown in the picture. This box contains the following informa- tion: - Channel number (in this example: Pr4). - Audio mode (stereo/mono). - Start/end time of the programme - The time bar shows the elapsed pro- gramme time. - Broadcasting station - Programme title - Date and time - Time details and title of the following programme Press the green key to view additional informa- tion about the programme currently sho- wing, provided the respective station broadcasts such information. Repeatedly press the green key to view additional information about the following programme, provided the respective station broadcasts such infor- mation. This information can also be accessed while a programme is running. To hide the information, press EXIT. Not possible with an external receiver ! Pr 4 Stereo 13:45 - 14:40 RTL Skispringen: Top 5004.01.06 11:35:12 14:40 - 15:00 Skispringen: Die Entscheidung Pr 4 Stereo 13:45 - 14:40 RTL Skispringen: Top 5004.01.06 11:35:12 14:40 - 15:00 Skispringen: Die Entscheidung Erster Durchgang des dritten Springens der Vierschanzen- tournee auf der Bergisel-Schanze in Innsbruck EXIT 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 56
57 20.3 Using the EPG Recording a Programme Selecting a programme for recording: If you have a video recorder with the dialogue system, the EPG permits you to start a recording by pressing a single key. • Press the EPG key to open the EPG. • Use the cursor control key to select the program- me you wish to record. If a video recorder with dialogue systemis con- nected (see also Section 25): - Switch on the video recorder. - Insert a cassette. - Press the red key on the remote control. If a normal video recorder is connec- ted: - Switch on the video recorder. - Insert a cassette. - Press the red key on the remote control to programme the TV timer (see also Direct recording (OTR)). - On the AV programme position of the video recorder, programme a timer with the data and time of the programme which will be provided by the TV timer. Opening the menu Not possible with an external receiver ! Recording Yes Reminder No Pr 1 Das Erste Date 01.05. Start 22:45 End 23:40 VPS no Recording device Videorecorder Change with :select :save the timer OK – + EPG 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 57
58 21. Setting the Countr y and Language The menu items Language and Countr y are not available in a 2 ** menu. Selecting the language in the TV menu You can select any of the available languages for the TV menu. All texts in the menu and in the help screen (Information) are then displayed in the selected language. Setting the countr y After installation of the TV set, you must enter the country in which it is installed (such as Great Britain) in order to assign certain basic settings (such as the channel assign- ments, the order in which the stations are stored, etc.). Setting language and country: • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Use the corresponding numeric keysto select Language or Country. • Press the OK key and then use the cursor control key to select the desired language or country. • Press the OK key to con- firm your selection. • Press the EXIT key to close the TV menu. Opening the menu MENU OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Selected language EnglishDansk Suomi Norsk Português Español Français Italiano Nederlands English Deutsch AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration :select. :saveOK F1➔ ✗ Selected country Great BritanLuxemburg Italy Great Britan France Finland Germany Denmark Belgiun Baltic states Australia AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration :select. :saveOK F1➔ ✗ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 58
59 22. Setting Stations Setting the reception mode This TV set is capable of operating in two different reception modes: Analogue TV: The broadcasting technology which has been used for many years. The signals can be received via a rooftop antenna or a cable. DVB-T: The new digital broadcasting technology whose signals can be received via an existing (analogue) rooftop antenna or an indoor antenna (depending on the strength of the available signal). For more details, please consult your local TV dealer or search for “DVB-T” in the Internet. Select the reception mode to match the broadcas- ting technology available in your area. Setting the reception mode • Press the MENU key to open the TV menu. • Press the red key to open the menu Confi- guration. • Use the corresponding numeric keyto select the appropriate reception mode Analogue TV or DVB-T. Opening the menu MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Start station search General settings Manual search Automatic search Search settings Antenna AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Start station search with .OK F1➔ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 59
60 Various TV standards for picture and sound are used in different countries. If the wrong TV stan- dard is selected, you will not be able to hear the sound, or it will be distorted. The TV standard L also uses a different standard for transmission of the picture. The TV standard must therefore be set before you execute a station search. The TV set is set in the factory to the TV standard B/G. Setting the TV standard 2) • Press the MENU key to open the TV menu. • Press the red key ® to open the menu Configuration. • Use the corresponding numeric key (in the exam- ple: ) to select Analogue TV. • The menu item Search set- tings is already selected. • Press the OK key and, in the setting window, use the -+ key to select the desired TV standard. • Press the OK key to confirm your selection. • Press the EXIT key to close the TV menu. Opening the menu 22.1 Setting Stations TV-Standard 2)for analogue stations MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 2) Possible only on sets equipped with this function. OK EXIT TV standard B/G Terrestrial station search Search settings2) AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Change with Accept value with .OK F1➔ – + 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 60