Metz Puros 37 Ml Operating Instructions
Have a look at the manual Metz Puros 37 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
101 DiSEqC makes it possible to control the satel- lite antenna digitally via the existing antenna cable and is a prerequisite for the reception of signals from more than two satellites (e.g. Astra, Eutelsat, Hotbird). If you wish to receive signals from at least three satellites (e.g. ASTRA 19.2°, Eutelsat 16°, Hot- bird 13°) the antenna system can be controlled only with the aid of DiSEqC. This menu item is not available in a 2** menu. Switching DiSEqC on and of f • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Press the appropriate nume- ric key (in this example to select DVB-S. • Use the cursor control key to select DiSEqC system and press the OK key to confirm the selection. The cursor is now located in front of DiSEqC system in the set- ting window. • Use the -+ to select Yes or No. • Press the OK key to confirm the new setting. • Press the EXIT key to close the TV menu. A1.1 Set-up of satellite system DiSEqC system i Calling the menu MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. OK EXIT DiSEqc system off General settings Manual search Automatic search Satellit B Astra 19,2° DiSEqc system LNB supply voltage Service menu AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-S Country Language Operating Configuration Change with Accept value with .– +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 101
102 You can set up to four satellites in the menu Con- figuration. No satellite is set in the factory. The LNB frequency is used to switch between the high and low frequency bands. The default fre- quencies Low band 9.75 GHzand High band 10.60 GHzare set in the factory. Selecting satellites • Press the MENU key to open the TV menu. • Press the red key to open the menu Confi- guration. • Press the appropriate nume- ric key (in this example to select DVB-S. • Press the appropriate nume- ric key (in this example ! to select Satellite A. • Use the -+ key to select the desired satellite. The most common satellites are dis- played one after the other, together with the symbol rates for each one. Depen- ding on the satellite, it may be necessary to set additio- nal symbol ratesmanually if the selected satellite uses different symbol rates and you wish to find the related transponders in an automa- tic station search. • Use the cursor control key to select Low band or High band. The settings depend on the components installed in the satellite antenna. For the correct settings, please consult the data sheet or the label of the LNB(s) being used. • Press the OK key to confirm the new settings. • Press the EXIT key to close the TV menu. Calling the menu A1.2 Set-up of satellite system Selecting satellites MENU ! The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. OK EXIT Satellite Astra 19,2° Symbol rate 1 22000 Low band 9,75 GHz Symbol rate 2 27500 High band 10,60 GHz Symbol rate 3 - - - - - General settings Manual search Automatic search Satellit B Astra 19,2° DiSEqc system LNB supply voltage Service menu AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-S Country Language Operating Configuration Change with Accept value with .– +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 102
103 The DVB-S station search scans the entire recep- tion band for TVand radio stationsand stores them in separate TV and radio station tables. For details of the DVB radio mode, see Section 29 in the operating instructions for the TV set. If you are not satisfied with the order in which the stations are stored, you can move stations to other positions in the table or delete them. For further details, see Section 24, Sorting stations in the operating instructions for the TV set. The station search will function correctly only if the LNB frequencies have been set and sto- red correctly. Executing the automatic sta - tion search • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Press the appropriate nume- ric key (in this example to select DVB-S. • Press the appropriate nume- ric key (in this example to select Automatic search. • In the setting window, use the -+ key to select the desired satellite. • Use the cursor control key to move to the menu line Start station search. • Press the OK key to start the station search. The TV set searches for the specified stations and places them in a station table, which is then displayed. If desired, you can sort or move stations to other positions in the table or delete unwanted stations. For details, see Section 24 of the operating instructions for the TV set. A2. Setting the stations Automatic search Calling the menu MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. OK EXIT Satellite Astra 19,2° Start station search General settings Manual search Automatic search Satellit B Astra 19,2° DiSEqc system LNB supply voltage Service menu AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-S Country Language Operating Configuration Start station search with OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 103
104 For the manual search, you must know the fre- quency, the symbol rate and the polarisation of the station for which you want to search. Executing the manual search • Press the MENU key to open the TV menu. • Press the red key to open the menu Confi- guration • Press the appropriate numeric key (in this exam- ple to select DVB-S. • The cursor is located on the line LNB supply voltage. • Press the appropriate nume- ric key (in this example to select Manual search. • The cursor then moves to Satellite. If more than one satellite is available, use the -+ key to select the desired satellite. • In the setting window, use the cursor control key to select the menu line Fre- quency. • Use the numeric keys or the -+ key to set the frequency. • In the setting window, use the cursor control key to select the line Polarisation and use the -+ key to select H=Horizontal or V=Vertical. • In the setting window, use the cursor control key to select the line Symbol rates and enter the symbol rate with the numeric keys. • In the setting window, use the cursor control key to select the line Start station search and press the OK key to start the search. The station is placed in the station table. If des- ired, you can sort or move stations to other posi- tions in the table or delete unwanted stations. For details, see Section 24 of the operating instructions for the TV set. A2. Setting the stations Manual search Calling the menu MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. OK Satellite Astra 19,2° Frequency 11836 MHz Symbol rates 27500 Polarisation H Start station search General settings Manual search Automatic search Satellit B Astra 19,2° DiSEqc system LNB supply voltage Service menu AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-S Country Language Operating Configuration Start station search with OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 104
105 With the menu item, General settings, you can specify whether or not the data are to be saved in the non-volatile memory of the TV set when trans- mission parameters are changed. This update function applies to stations which use different transmission parameters at different times of the day, such as when they transmit regional programmes. Setting the data update function • Press the MENU key to open the TV menu. • Press the red key to open the menu Confi- guration. • Press the appropriate nume- ric key (in this example to select DVB-S. • The cursor is located on the line LNB supply voltage. • Press the appropriate nume- ric key (in this example to select General settings. • In the setting window, use the -+ key to set Update data to On. • Press the OK key to confirm the new setting. • Press the EXIT key to close the TV menu. Calling the menu A2. Setting the stations Updating the data The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. MENU OK EXIT Update data on General settings Manual search Automatic search Satellit B Astra 19,2° DiSEqc system LNB supply voltage Service menu AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-S Country Language Operating Configuration Change with Accept value with .– +OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 105
106 ProblemPossible causeRemedy TV set does not react to commands from the remote control• No line of sight between the remote control and the TV set. • Sunlight is shining directly on the infrared window of the TV set. • Batteries of the remote control are exhausted. • TV set has been switched off with the main power switch. • Fault in the internal processor.• Remove any obstacles between the units. • Prevent sunlight from shining on the set. • Replace the batteries. • Switch on the TV set with the main power switch. • Switch off the TV set with the main power switch, wait a few seconds and then switch it on again. The message Enter code is displayed when the TV set is switched on.• The childlock is active and was programmed to disable all stations.• Enter the code you used when programming the childlock. The TV set will not switch to a selected programme position. A teddy bear is dis- played instead.• The childlock is active and was programmed so that only the stations shown in the list beside the teddy bear may be selec- ted.• Enter the code you used when programming the childlock. You have switched off the TV set with the key, but the green LED remains on.• EPG data are currently being collected from the programmed EPG station.• None. When all data have been collected, the TV set will switch itself off automatically. Direct recording of an analogue terrestrial station (received via roof antenna or cable) with Data Logic does not work.• The Data Logic video recorder is not connected to the roof antenna or cable outlet with a suitable cable.• Connect the Data Logic video recorder to the roof antenna or cable outlet with a suitable cable. 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 106
107 Data Logic does not work. AV device (video rec.) independently breaks off recording• The Data Logic video recorder with data transfer has not been registered correctly. • The Scart cable does not have all pins connected through. • Wrong data logic setting (see also ch. 19.1)• Open the menu AV devices and register the Data Logic video recorder as video recor- der 1 with Data Logic On. • Use a Scart cable in which all pins are con- nected through. • Set the data logic setting to Mode 2 from Mode 1 ProblemPossible causeRemedy General problems with an external AV device connected to the TV set.• The AV device has not been registered in the TV set.• Open the menu AV devices, select the devi- ce with the cursor, set the signal types (OUT/IN) correctly and press the OK key. Make sure that you con- nect the AV device as shown in the connection diagram. A film in 16:9 format is played back from an AV device, but is displayed in 4:3 for- mat.• The picture format for this pro- gramme position has not been set correctly in the TV menu.• Select the AV program- me position and set the picture format to 16:9 or Automatic (see Sec- tion 37). The menu of a con- nected AV device (such as a DVD play- er) is not visible on the TV screen.• The AV device has been regis- tered in the TV menu with the signal type Composite video.• Register the AV device with the signal type RGB (see page 72). 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 107
108 Various programs are transmitted with several audio channels (e.g. multilingual or Digital Audio). If you are receiving a multilin- gual programme the informa- tion box on the bottom left of the screen features the logo. Press F2to see the list of available languages. Open menu: • Press F2. Press F2 briefly to run the function programmed for the key (see Chapter 18. Programming function keys). Press F2 for approx. 3 seconds and the max. possi- ble selection is displayed. • Press numeric key and select the Programme language function. • Select a language with the cursor control key . Symbol in grey: Other audio options e.g. dd = Dolby digital are available but are not selected. Symbol in white: One of the audio options has been selected. DIGTAL AUDIO DIGTAL AUDIO b Audio/language selection Pr 30 Stereo arte 05.04.07b Calling the menu Special fuctions 2 1Normal/Speech 2 Language of progr. 9Timer over view 0Direct recording 1German 2 France F2 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 108
109 To connect a PC to the LCD TV, you must first regi- ster the PC with the LCD TV; see Chapter 25 Registering AV Devices. Set the signal type for the PC to DVI-A (analogue with VGA cable) or DVI-D (digital with DVI cable), depending on the connection type. Use a suitable connection cable to connect the PC to the LCD TV. Power on the LCD TV, press AV, and select the PC connection with the respective number key. Power up the PC and wait. Usually, the LCD TV will recognise the PC and display the image. If possible, select a resolution of 1366 x 768 pixels @ 60 Hz. If these steps do not result in a satisfactory display of the PC image, proceed as follows: 1. Before you connect the PC to the LCD TV, set the resolution to 1024 x 768 pixels and the refresh rate to 60 Hz. For graphics cards with two out- puts (e.g., VGA and DVI), set the operating mode to clone to display the same image on both outputs. 2. Install the latest graphics-cards driver. Most graphics cards have an ATI or nVidia graphics chip. For all ATI-based graphics cards, the drivers can be downloaded from www.ati.com (often catalyst drivers). The latest drivers for all nVidia-based graphics cards are available at www.nvidia.com. 3. If you use the analogue VGA graphics-card output, use a fully wired 15-pin VGA cable in order to ensure that the information exchange between the PC and the LCD TV works (DDC) Connect a PC 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 109
110 Various pay TV stations broadcast portal stations. These portal stations are filled with sub-stations or optional channels. In station search (see ch. 22) in Search settings the setting all, only free or free+CICAM must be set so that these stations can be found too. After a station search, the portal sta- tions and the accompanying optional channels (may also be identified in the station table as SID=xy) will be shown in the station table on various program places. We have programmed a simple way for you to find optional channels quik- kly. If you select a portal station via the sta- tion table (see p. 9), a suitcase symbol appears next to the station logo. This suitcase can be opened by pressing the white button repeatedly. All optional channels inclu- ded in this suitcase then appear in the station table. Other stations are not shown simultaneous- ly. In this way, you can switch quickly bet- ween the optional channels. Portal stations 10 Kabel 1 9 Nord 3 8RTL 7 PRO 7 6 Nord 3 5 PRO 7 4SAT1 3 Portalsender2 ZDF 1 ARD 56 Hessen 3 55 SW-BW 54 N-TV 53 West 3 52 Phönix Auswahl mit... und . Bestätigen mit . OK 5Optionskanal 44Optionskanal 33Optionskanal 22Optionskanal 11PortalsenderAuswahl mit... und . Bestätigen mit . OK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 110