Metz Puros 37 Ml Operating Instructions
Have a look at the manual Metz Puros 37 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 17. Special Functions Normal/SpeechOpening the menu Opening the menu Selection of Normal or Speech is des- cribed in Section 12.1, Tone Settings. In this menu, you can temporarily select Normal or Speech. The selection remains active until you switch to another programme position, switch to standby mode or switch the TV set off completely. This setting has no effect of the setting described in Section 12.1, Tone Set- tings.Special functions 2 1Normal/Speech 9Timer-Over view 0Direct recording F2 If you wish to record a programme which your video recorder or DVD recorder cannot receive directly because it does not have a suitable tuner (such as DVB-T or DVB-C), you can use the Timer overview to make such programmes available to the recording device. Setting a timer manually for a recording: • Press the F2key. If you press F2brie- fly, the function programmed for F2 (see Section 18.1, Programming the function keys) is executed. If you hold down F2for about two seconds, all possible selections are displayed. • If all possible selections are display- ed, press the corresponding numeric key (in the example: $) to open the timer menu. • If a timer already exists, press the F1 key. • The cursor is located at the left of the first line Recording Yes Reminder No Pr --- Date --.--. Start --:-- End --:-- VPS No Recording device Videorecorder Timer Preview 17:23Mon Tue Wed ThuFriSat Sun29.04. Change with . :select. :save the timer. F2 F1 The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 17. Special Functions Recording a programme with a timer OK – + – + 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 41
42 Record. The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. Use the -+ key to set this menu item to Yes. • If desired, press cursor control key and use the - +key to activate the reminder function. If the reminder function is active, a reminder window is displayed on the screen one minute before the start time programmed for the timer. • Use the numeric keysto select the pro- gramme position (see the station table of the TV set) which is to make the pro- gramme available for recording. • Press the cursor control key and use the numeric keysto enter the date, start time and end time of the programme you want to record.. If you inadvertently enter a wrong time, you can delete it with the II key or overwri- te it with the numeric keys. • Press the cursor control key and use the -+ key to select the recording device connected to the TV set which is to be used for the recording. • Press the OK key to save the programmed set- tings. The settings are stored in the timer memory. • Press the EXIT key to close the TV menu. Clearing a timer: • Press the F2key. • Press numeric key to open the timer menu. • Use the cursor control key to select the timer you wish to clear and press IIto mark it for deletion. A window is displayed on the screen, asking whether you really want to clear this timer. Confirm the intended action by pressing the appropriate key. 17. Special Functions Recording a programme with a timerOpening the menu Recording Yes Reminder No Pr 6 SAT 1 Date 01.05. Start 22:45 End 23:40 VPS Yes Recording device Videorecorder Timer Preview 17:23Mon Tue Wed ThuFriSat Sun29.04. :select 0..9:set time :new timer :clear timer :edit 20:00 Das Erste -20:15 Tagesschau 22:45 SAT 1 -23:40 Planetopia F1 – + – + 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 42
43 17. Special Functions Direct recording of a programmeOpening the menu If you wish to record the programme you are cur- rently watching, you can start a direct (one-touch) recording to make the current programme availa- ble to a recording device connected to the EURO sockets. Star ting a direct recording: • Press the F2key. If you press F2briefly, the function programmed for F2 (see Section 18., Programming the Func- tion keys) is executed. If you hold down F2for about two seconds, all possible selections are displayed. • Press numeric key to open the timer menu window. The timer menu window displays the programme position, the date and the EPG data for the current pro- gramme or for the next two hours. • If there is more than one AV device connected to your TV set, use the cur- sor control key to select the propo- sed recording device and use the -+ key to select the desired device. • Press the OK key to save the settings. On the recording device (e.g. video recor- der), select the AV programme position and start the recording by pressing the appro- priate button (REC, OTR, etc.). Recording Yes Reminder No Pr 6 SAT 1 Date 01.05. Start 22:45 End 23:40 VPS no Recording device Videorecorder Change with :select :save the timer OK F2 – + 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 43
44 Adjusting the picture format: • Press the F3key. If you press F3briefly, the function programmed for F3 (see Section 18., Programming the Func- tion keys) is executed. If you hold down F3for about two seconds, all possible selections are dis- played. • Press numeric key to select the function Picture format menu. • Use the P+/P- rocker key to select the desired function. After selection of a picture format, you can also adjust the zoom setting by pressing the -+ key within five seconds. • The settings made here (except for the automatic zoom set in the TV menu) remain active until you switch to a diffe- rent programme position or switch off the TV set. Zoom / Picture position After selecting the function Zoom, you can adjust the zoom factor with the -+key. In addition, you can move the picture position 4)up and down on the screen in order, for example, to keep the station logo or the subtitles visible. To change the pictu- re position, press and hold the F3key until the selection is displayed. Then press numeric key and use the P+/P- rocker key to move the picture. Standard 4:3 This is the standard setting for all programmes in the 4:3 picture format. 17. Special Functions Picture format Opening the menu F3 Special functions 3 1Picture format 2Pic. form., vertikal 16:9 full picture+ Zoom Standard 4:3 — 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 44
45 17. Special Functions Picture format Opening the menu Panorama With the aid of the panorama function, you can expand programmes broadcast in 4:3 format to fill the screen of a 16:9 TV set. The picture is expanded uniformly in the horizontal direction. You can also zoom the picture. The panorama function can be activated and deactivated in the menu item General picture settings of the menu Picture and sound. 16:9 Full picture This function serves to display pictures from external devices (such as a 16:9 video recorder) with the correct aspect ratio. Standard 4:3 + Panorama 16:9 full picture— Panorama + 16:9 full picture Zoom — 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 45
46 If desired, the picture can be shifted up or down in order, for example, to make subtitles visible or to hide ticker displays. Adjusting the picture position: • Press the F3key. If you press F3briefly, the function programmed for F3 (see Section 18., Programming the Function keys) is executed. • Press numeric key to select the function Picture position vertical. • You can now use the -+ key to move the picture up and down on the screen so that, for example, the station logo or the subtitles are visible. This setting is not saved. If you wish to save it as a global setting, use the procedure described in Section 11 to set it. 17. Special Functions Picture Position F3 Opening the menu Special functions 3 1Picture format 2Pic. form., vertikal 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 46
47 The remote control has four function keys: F1, F2, F3 and AV. You can programme these function keys with any of the available functions. If you press and hold any function key, a window with the available functions is dis- played. The picture on the left shows the functions available for the F2 key. Programming function key F1, F2, F3 or AV with a function • Press the MENU key to open the TV menu. • Press the red key to open the Confi- guration menu. • Press and hold the F1key to display the availa- ble functions. • Use the cursor control key or the correspon- ding numeric keys to select the desired Func- tion for.. (in this example: F2). • Press the OK key and then use the cursor con- trol key to select one of the available functions. • Press the OK key to assign this function to the selected function key (the selected function is marked with X). • Press the EXIT key to close the TV menu. If a function key is pro- grammed with a func- tion, this function can be called by briefly pres- sing the function key. Pressing and holding the function key displays a list of all available functions. 18. Programming the Function KeysOpening the menu F2 F1 MENU Special functions 2 1Normal/Speech 9Timer over view 0Direct recording OK EXIT Function for F2 Timer overviewDirect recording Timer overview Language of progr. normal/speech AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration : select. : save and clearOK F1➔ ✗ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 47
48 In the menu Sound settings, you can activate a two-stage mute function. When this function is active, the volume in TV mode can be reduced in two stages with the mute key . Activating the mute function • Press the MENU key to open the TV menu. • Press the red key to open the Configura- tion menu. • Press the OK key to move to the right side of the menu. • Use the cursor control key or the corresponding nume- ric key (in the example: ( ) to select the menu item Sound settings. • In the setting window, use the -+ key to set the func- tion Mute (2-stage) to On. • Press the OK key to save the setting. • Press the EXIT key to close the TV menu. In normal TV mode, the mute key is used as follows: • Press it once to reduce the volume by 12 sca- le divisions. • Press it again within five seconds to reduce the volume to 00. • Pressing the key once again restores the volume to its original level. Dual channel (Audio-Discription) During films for the blind, the scenes are descri- bed in the dialogue intervals. Under Dual chan- nel, select Audio 2 if you want to receive films for the blind (with audio descriptions). 19. Sound Settings Mute Function Opening the menu MENU OK ! OK EXIT Mute (two-stage) on Sound via Loudsp.Data Logic adjustm. EPG settings Operating Sound settings HiFi output 2) Init. prog.position AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Change with Accept value with .– +OK F1➔ The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 48
49 19.1 Data Logic Settings Data Logic Mode 1 / Mode 2 Factory setting is Mode 1. If the recording is stopped by the Data Logic Videorecorder (self-dependent, 5-10sec. after the start of the recording), switching to Mode 2could solve this problem. Opening the menu MENU OK EXIT OK Data Logic mode 2Data Logic adjustm. EPG settings Operating Sound settings HiFi output 2) Init. prog.position AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Change with Accept value with .– +OK F1➔ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 49
50EPG 20. EPG EPG (Electronic Program Guide) is an electronic TV guide covering all major channels. The guide may be made up of details from NexTView and/or DVB-SI. The NexTView information is broadcast by various channels and also includes information for other broadcasting organizations. DVB-SI (Digital Video Broadcasting-Service Infor- mation) is a service provided by different broad- casters. Programme details are broadcast digitally by each broadcaster exclusively for those pro- grammes it offers. NexTViewand DVB-SIare similar in principle, but their content may differ in the detail offered. The function is activated by pressing the button marked “EPG”. NexTView details Before NexTView details can be received, a new programme slot must be created in the menu. If the menu does not contain a slot for NexTView, the following text applies. A message will appear for all slots programmed to receive NexTView: In this way, the TV asks whether this slot should be used to compile the information for the EPG pro- gramme guide. Accept this programme as an EPG programme ? Ye s Any other key close the window. 20.1 Activating the EPG Not possible with an external receiver ! 8) NexTView is transmitted by the following broadcasting organizations: Dand A: Kabel1, CH . . . .SF1, TSR1, TSI1, TV5 F: . . . . . .Canal+, M6, TV5 Status as of 18 Aug 2006 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 50