Metz Clarus 32 Ml Operating Instructions
Have a look at the manual Metz Clarus 32 Ml Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 5 Metz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
61 Opening the menu 22.1 Setting Stations Analogue TV Terrestrial station search The terrestrial station search automatically searches the entire range of available reception frequencies for stations. All stations which are found are placed in the station table which is displayed at the end of the search operation. If you are not satisfied with the order in which the stations are displayed, you can move them to other positions or delete unwanted stations (see Section 24., Sorting stations. Executing a terrestrial station search • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Use the corresponding numeric key(in the example: ( ) to select Analogue TV. • Use the corresponding numeric key (in the exam- ple: ( ) to select Terr. station search. • Press the OK key and, in the setting window, confirm the menu item Start station search by pressing the OK key. • The TV set starts to search for available stations. A station table with the new- ly found stations is displayed on the left half of the screen. If a station table already existed before the search, the newly found stations are automatically appended after the last existing station. • After completion of the search, all stations which have been found are sorted. • You can delete any unwanted stations from the station table by selecting them with the cursor control key and pressing the IIkey. The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. 2) Possible only on sets equipped with this function. Start stadion search Terrestrial station search Search settings2) AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Start station search with .OK F1➔ OK MENU 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 61
62 The TV set will normally detect the colour standard (PAL, SECAM, NTSC, NTSC44, PAL60, PAL M) automatically. If this automatic selection does not provide satis- factory results (which should happen only rarely), you can select the colour standard manually for each programme position. The colour standard is set in the factory to Auto- matic. Setting the colour standard • Press the MENU key to open the TV menu. • Press the white key to open the station table. • Press the F2key to enable editing of the station table. • Use the cursor control key to select the programme posi- tion whose colour standard you wish to change. • Press the cursor control key to move to the left column. • Use the corresponding numeric key (in the exam- ple: ) to select Colour standard. • Use the -+ key to select the desired colour stan- dard, or to step through the available colour standards until the picture is displayed clearly. • Press the OK key to confirm your selection. • Press the EXIT key to close the TV menu. Opening the menu 22.1 Setting Stations Colour standard for analogue stations The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. MENU F2 EXIT OK Colour standard SECAMSound corrections Colour standard 3)7) Picture quality Picture correct. Enter logo Station contained in EPG Signal quality5) DVB-prog. info5) Frequency/channel7) 0010Hessen 3 0009Südwest 0008MDR 0007PRO 7 0006RTL 2 0005RTL 0004SAT 1 0003Bayern 3 0002ZDF 0001ARD Station table Change with Accept value with– +OK ✗ F1➔ 3) See glossary for an explanation. 5) Available only for DVB stations! 7) Available only for analogue stations! 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 62
63 The DVB-T station search operation searches the entire frequency band for TV stations. All stations which are found are placed in separate TV station tables. If you are not satisfied with the order in which the stations are displayed, you can move them to other positions or delete unwanted stations (see Section 24., Sorting stations. Executing the automatic station search • Press the MENU key to open the TV menu. • Press the red key to open the menu Confi- guration. • Use the corresponding numeric key(in the exam- ple: #) to select DVB-T. • In the setting window Anten- na, you can switch the sup- ply voltage for an antenna on or off with the -+ key. Normal setting = Off ! The setting On may be used only if you have an active indoor antennawhich needs a supply voltage for its inter- nal amplifier. • Press the OK key and use the corresponding numeric key (in the example: ) to select Automatic search. • Press the OK key to start the search. The TV set now searches for available stations. 22.2 Setting Stations Automatic DVB-T* station searchOpening the menu MENU ! OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. *depending on equipment Start station search General settings Manual search Automatic search Antenna AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Start station search with .OK F1➔ 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 63
64 For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the MENU key to open the TV menu. • Press the red key to open the menu Confi- guration. • Use the corresponding numeric key (in the example: #) to select DVB-T. • The cursor is now on the menu line Antenna. Press the OK key • In the setting window Antenna, you can switch the supply voltage for an antenna on or off with the - + key. • Press the OK key and use the corresponding numeric key (in the example: !) to select Manual search. • In the setting window, use the numeric keysto enter the channel number or the frequency. If you know further data of the desired sta tion, select the menu item Mod. parameter and use the -+ key to change the setting there to Manual. You can then enter further data. • After input of the station data, use the cursor control key to select the menu item Station search and press the OK key to confirm your selection. The station settings are saved. 22.2 Setting Stations Manual DVB-T*station searchOpening the menu MENU ! Channel 05 Frequency177.500 MhzMod.-Parameterauto. Start station search General settings Manual search Automatic search Antenna AV function Function for F3 Function for F2 Function for F1 EURO sockets DVB-T Analog-TV Country Language Operating Configuration Start station search with .OK F1➔ Transmission 8k Mode Modulation64 QAMMod. Parameter manuellGuard Intervall 1/8 Code rate 3/4 Start station search The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. *depending on equipment 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 64
65 The DVB-C station search operation searches the entire frequency band for TV and radio stations. All stations which are found are placed in separa- te TV and radio station tables. See Section 29 for details of DVB radio mode. If you are not satisfied with the order in which the stations are displayed, you can move them to other positions or delete unwanted stations (see Section 24., Sorting stations. Executing the automatic search • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Press the numeric key %to select DVB-C. • The cursor is now on the menu line Automatic search. • Press the OK key and then press the corresponding numeric key (in the example: ) to select Automatic search. The cursor is now on the line Symbol rate 1. The most common symbol rates are already preset. Usually these settings do not need to be modified. If the symbol-rate settings do not yield the desired result, set other sym- bol rates and save them by pressing OK. Ask your cable operator for details. • Press the cursor control key to select the menu line Start station search. • Press the OK key to start the search. The TV set now searches for available stations. 22.3 Setting Stations Automatic DVB-C*station searchOpening the menu MENU OK OK Symbol rate 13)6900 Precision search off Symbol rate 2 6875 Start station search Symbol rate 3 General settings Manual search Automatic search Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Configuration Start station search with .OK F1➔ The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. *depending on equipment only in the case of corresponding equipment or conversion. 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 65
66 For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the MENU key to open the TV menu. • Press the red key to open the menu Configuration. • Use the corresponding numeric key(in the example: ) to select DVB-C. • The cursor is on the menu line Automatic search. • Use the corresponding numeric key(in the exam- ple: ) to select Manual search. • The cursor points to Chan- nel. • In the setting window, use the numeric keys to enter the channel number (or special channel number) or the fre- quency of the desired sta- tion. If you know further data of the desired station, select the menu items Modulation and Symbol rate and use the -+ key or the numeric keys to change the settings there. • After input of the station data, use the cursor control key to select the menu item Station search and press the OK key to confirm your selection. The station settings are saved. 22.3 Setting Stations Manual DVB-C*station searchOpening the menu MENU OK Channel 05 Cable channel --Frequency 64.500MHzSymbol rate 6900 Madulation Auto.mode Start station search General settings Manual search Automatic search Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Configuration Start station search with .OK F1➔ The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. *depending on equipment only in the case of corresponding equipment or conversion. 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 66
67 23. Station Logo With the aid of the VPS signal, a station logo with a maximum length of 15 characters is automati- cally assigned to each station. If this automatic assignment does not work, or if you want to use a different logo, you can change the setting manually. Setting the station logo • Press the MENU key. • Press the white key to open the “station table”. • Press the F2key to enable editing of the station table. • Select the programme position whose logo you wish to change. • Press the cursor control key to move to the other column. • Use the corresponding numeric key (in the exam- ple: ) to select Logo input. • The various letters and digits can be selected with the aid of the cursor control key . • You can delete single cha- racters with the red key or the complete logo with the IIkey. • Set the desired logo by repeatedly pressing the various numeric keys. The lowercase letters are displayed after the uppercase letters. • Press the OK key to save the new logo. • Press the EXIT key to close the TV menu. Opening the menu MENU F2 EXIT OK The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently. _ , ;ABC!DEF GHIJKL MNO RTL 2 PQRS TUVWXYZSound corrections Colour standard 3)7) Picture quality Picture correct. Enter logo Station contained in EPG Signal quality5) DVB-prog. info5) Frequency/channel7) 0010Hessen 3 0009Südwest 0008MDR 0007PRO 7 0006RTL 2 0005RTL 0004SAT 1 0003Bayern 3 0002ZDF 0001ARD Station table F1➔ clear alldelete character.select position. save abort II MENUOK 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 67
68 24. Sorting Stations You can move, copy and delete individual stations or groups of stations within the station table. Moving, copying and deleting stations • Press the MENU key to open the TV menu. • Press the white key to open the station table. • Use the cursor control keyto select the pro- gramme position which is to be moved, copied or deleted. You can also mark a contiguous block of positions by moving the cursor to the programme position at the end of the block. • Briefly press the OKkey to mark the programme position (in the example: position 006). Press and hold the OKkey to mark all programme positions in the previously selected block. • To copy this programme position, use the cursor to select the programme posi- tion before or after which the selected station is to be inserted. If the station(s) you have selected were previously in programme positions with lower num- bers than the insertion position, they are inserted before this position; if they previously had higher numbers, they are inserted after this position. • To move the selected station(s), select the pro- gramme position to which the station(s( is/are to be moved. • Use the -+ key to copy (+) or move (-) the sta- tion(s). • To delete a station, press the llkey. • Press the EXIT key to close the TV menu. Opening the menu MENU OK EXIT Select station with (hold down to select a block). Select new position with the cursor :move/copy, :delete. Delete all marks with . 0010Hessen 3 0009Südwest 0008MDR 0007PRO 7 0006RTL 2 0005RTL 0004SAT 1 0003Bayern 3 0002ZDF 0001ARD 0020BR alpha 00193 SAT 0018Kinderkan. 0017FRANKEN 0016TELE-5 00159LIVE 0014SuperRTL 0013Kabel 1 0012VOX 0011West 3 F1➔F1➔ F3➔F3➔ Station table : select :edit programme attributes or station list.F2OK – +II 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 68
69 25. Registering AV DevicesOpening the menu MENUAV(audio/video) devicesare external devices which deliver video and/or audio signals (such as video recorders, DVD players, DVD recorders, etc.) and which can be connected to TV sets. All commonly available AV devices are listed in the menu AV devices. Note that you must always connect AV devices exactly as shown in the connection diagram in the TV menu of your TV set ! SVHS/Hi8 and Data Logic video recorders mustalways be connected to the EURO1 socket of the TV set. In the factory, the EURO1 socket is programmed for a video recorder and the EURO2 socket is pro- grammed for a DVD player. Registering an A V device on the TV set • Press the MENU key to open the TV menu. • Press the yellow key to open the menu AV devices. • Use the cursor control key to select the AV device you wish to register and press the OK key. • Press numeric key and use the -+ key to select the appropriate signal types (OUT/IN) for this device and press OK to confirm your selection. For details of the sig- nal types, see page 66 and the operating instructions for the AV device being connected. • If desired, press numeric key , enter a diffe- rent name for this AV device and press OK. • Use the cursor control key to select Connect and press the OK key. Then connect the AV device to the corresponding EURO socket. i Caution! Connection of a new device may cau- se an existing connec- tion diagram to be changed. If so, you must reconnect the AV devices accordingly. OK OK EXIT Connect as follows: Videorecorder CVBS CVBS EURO1 DataLogic Name Signal types connect HiFi amplifier AV-Receiver Other device 2 Other device 1 PC Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.2 DVD/Videorec.1 F1➔ select connect and clearOK ✗ VCR➔➔ AV devices 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 69
70 Data Logic video recorder Data Logic is a system which provides a dialo- gue between a TV set and a video recorder. This intelligent system offers the features such as: - Automatic transfer of the settings for terrestrial or cable TV stations (not DVB) to the video recorder. - Immediate recording - the video recorder records the programme currently displayed on the TV screen. - Automatic switching to the AV programme posi- tion. - Direct control of the video recorder from the timer menu of the TV set. - Automatic switching off of the video recorder when the TV set is switched to the standby state. In the menu AV devices check Xto the left of the field Data Logic for Video recorder 1 and connect the video recorder to the EURO1 socket. Data Logic will function correctly only if the AV-1 socket on the video recorder is con- nected to the EURO 1 socket on the TV set. Comparable dialogue systems are: QLink (Pan- asonic), EasyLink (Philips), Megalogic (Grundig), SMARTLINK (Sony). Registering a Data Logic video recorder on the TV set • Press the MENU key to open the TV menu. • Press the yellow key to open the menu AV devices. • Use the cursor control key to select the AV device to be connected and press the OK key. 25. Registering AV Devices Data Logic i Opening the menu This menu item is not avai- lable in a 2 ** menu. MENU OK Connect as follows: Videorecorder CVBS CVBS EURO1 DataLogic Name Signal types connect HiFi amplifier AV-Receiver Other device 2 Other device 1 PC Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.2 DVD/Videorec.1 F1➔ select connect and clearOK ✗ VCR➔➔ AV devices 607 47 2042.A1 Clarus GB 04.12.2007 9:59 Uhr Seite 70