Makita Lawn Mower PTM0902 Instructions Manual

6.4.4 Replacing a fuse
The machine is fitted with fuses (1) with
different capacities and functions. Specifi-
cally:
– 10 A fuse = protects the main and
power circuits of the electronic circuit
board. When it blows, the machine
stops and the dashboard light switches
off.
– 25 A fuse = protects the battery charger
circuit. When it blows, the battery grad-
ually runs out and the machine will have
problems starting.
The fuse capacity is indicated on the fuse.
A blown fuse must
always be replaced by one of...

36ENMAINTENANCE
6.5 INFORMATION FOR SERVICE CENTRES
Below is a list of specifications for machine adjustments and instructions for disman-
tling and replacing the blades.
These operations must be carried out by a specialized Centre
only. Remove the ignition key before doing any adjustments or maintenance.
6.5.1 Adjustments
!WARNING!
a) Brake:
➤Mechanical
transmission:
➤Hydrostatic
transmission:
b) Drive:
➤Mechanical
transmission:
➤Hydrostatic
transmission:
c) Blade engagement:
Element...

37ENMAINTENANCE
6.5.2 Dismantling, replacing and remounting the blades
Always wear work
gloves when handling the blades.
Damaged or bent
blades must always be replaced;
never try to repair them! ALWAYS
USE ORIGINAL BLADES BEARING
THE SYMBOL   ! Make sure the
blades are correctly balanced.
1. Dismantling
To remove a blade, hold it firmly and undo
the central bolt (1) in the direction indicat-
ed by the arrow.
2. Remounting
Check that the concave part of the cush-
ion disc (3) presses against the blade....

38ENTROUBLESHOOTING
1.With the key on«ON», the lightremains off
2.With the key on«START» the lightflashes and thestarter motor doesnot run
3.With the key on«START» the lightcomes on but thestarter motor doesnot run
4.With the key on«START»,  the startermotor runs but theengine does not start
5.Starting is difficultor the engine runserratically
6.Poor engine per-formance during cut-ting
The safety device of the electronic cir-cuit board has cut in due to:
– badly connected battery  – battery terminals...

39ENTROUBLESHOOTING
PROBLEM LIKELY CAUSE SOLUTION
7.The motor shutsdown whilst working
8.The blades do notengage  
9.Uneven cut andpoor grass collection
10.Unusual vibra-tions while working
11.With the enginerunning, the machinedoes not move whenthe drive pedal ispressed  ( forhydrostatic drivemodels)
➤
The safety device of the electronic cir-cuit board has cut in due to:
– battery contains electrolyte but is notcharged
– the safety devices have cut in
– problems with engagement mecha-nism
– cutting deck...

40ENACCESSORIES ON REQUEST
1. FRONT COUNTERWEIGHTS
These improve stability at the front of the machine,
particularly when it is used mostly on sloping ground. 
2. REAR TOOL HOLDER KIT
To carry small tools and objects.
No objects carried onboard
must protrude by over one-third of their length,
they must not hinder the driver or compromise
his control over the machine or be able to cause
injuries to the driver or any third persons in the
case of an accident or an emergency situation.
3. TOWING HITCH
For...

41ENSPECIFICATIONS
Forward speed (approximate) at
3000 min-1:
in 1st  ................................... 2.2 km/h
in 2nd  ................................. 3.8 km/h
in 3rd  ................................... 5.8 km/h
in 4th  ................................... 6.4 km/h
in 5th  ................................... 9.7 km/h
in Reverse  ........................... 2.8 km/h
Forward speed  (at 3000 min-1):
in Forward gear   .. from 0 to 8.8 km/h
in Reverse   .......... from 0 to 3.8 km/h
➤Hydrostatic...

Gentile Cliente,
vogliamo anzitutto ringraziarla per la preferenza accordata ai nostri prodotti e ci augu-
riamo che l’uso di questa sua nuova macchina rasaerba le riservi grandi soddisfazioni
e risponda appieno alle sue aspettative.
Questo manuale è stato redatto per consentirle di conoscere bene la sua macchina e
di usarla in condizioni di sicurezza ed efficienza; non dimentichi che esso è parte inte-
grante della macchina stessa, lo tenga a portata di mano per consultarlo in ogni
momento e lo consegni...

INDICE
1. NORME DI SICUREZZA.......................................................................................... 3
Contiene le norme per usare la macchina in sicurezza
2.  IDENTIFICAZIONE DELLA MACCHINA E DEI COMPONENTI............................. 7
Spiega come identificare la macchina e gli elementi principali
che la compongono
3. SBALLAGGIO E MONTAGGIO................................................................................ 9
Spiega come rimuovere l’imballo e completare il montaggio
degli...