Macrotel Mt360 Series Digital Key System Installation Manual

Each DS3/SPD key stores four numbers: two speed dial
locations, and two DSS numbers.When in /CM mode, pressing the DSSGPD key selects the
DSS number.
After selecting a line, pressing the DSSSPD key selects the
SPD number.SHiFTkey is used to toggle between the twopages of speeddial numbers.
DISCRIMINATING RINGING
Incoming C.O. line ring and ICM ring (ICMcallback ring) can bedistinguished ,by their different ring time intervals (ring ca-
dence). This informs the station user of the call type so he can...

EXTERNAL CALL FORWARD (ECF)
[Call Handling]. .Incoming calls to the system on a given line can be forwarded
to one external call forwarding line to be transferred to one
remote answering point. This is usually used to transfer to ananswering service or home office after hours, especially inapplications where it is important to always have a “live” person
answer the phone, such as doctor’s offices, etc.
Conditions:
The ECF can be programmed as “Day’: “Night’: “Always”, or
“Never”.This remote...

HOLD ABANDONThe held line call will be disconnected automatically when the
system detects that the held party has hung up. (A direct current
interruption (DCI) signal has been received from the C.O.)
Conditions:-This function is programmable on a per-line basis.
- This function is performed on all types of hold, such as
common hold, exclusive hold, and conference hold.
HOLD REMINDER
The system will recall the station user to remind him that a callis on hold (whether on a line or ICM call). It occurs...

LINE GROUP ASSIGNMENT [Line]
Lines can be assigned to one of two line groups, Then, when
a user accesses a line group, he will occupy an idle line in that
group.
Conditions:
- Maximum of two line groups can exist.
- Each line can only be assigned to one of the groups.L/NE INTERFACE
Loop start line interface is used to the Central Office.LINE NAME PROGRAMMING 
[Resource]
Linescan be given names that appear on the LCD display when
ringing, or selected for an outside call. This enables the user to
answer...

MUSIC (3N HOLD
Music is heard by the held party of an 0.4 or C.O. line call. This
music can be from an external music source, or, if no external
source is connected, from the system’s internal synthesized
music.
MUTE (VOICE MUTE)
The mute feature enables a station user to talk privately to
someone in his office without being heard through the phone,
while he’s on a call.He can still hear the other party, but they
cannot hear him.
Conditions:
-Mute is effective whether on a line or intercom call.-Mute can...

RELEASE
The RELEASE key is used to finish or abandon feature pro-
gramming, and to drop a call without hanging up the handset,REM/N VER CLOCK /ResourcelThere are two kinds of reminderclockfunctions. One is system
wide, and one is programmed by station. When the system
wide reminder clock is activated, all idle stations receive back-
ground music for one minute. When a station reminder clock is
programmed, that station will display a notification message onthe LCD, and alert ringing will be heard....

Conditions:
-Feature sLtus that can be checked include:
LNR digitsSet lock/unlock
SNR digitsVoice call (allow/deny)
Day class of serviceCall waiting (allow/deny)
Night class of serviceNight set (yes/no)
Automatic hold (allow/deny)Data rateSTATION GROUP ASSIGNMENT: 
[Set]
Stations may be assigned group numbers for call pickup and
page.Conditions:-The maximum number of groups available is eight.
-Each station may be assigned to only one group.STATION LOCK/UNLOCK:
A station user may lock his station to...

-The MUTE key can be enabled in idle mode so when a voice
callis made to that station, they cannot hear what is going on
in the office until the user de-activates the mute feature.
This
provides more privacy to the called party, if required.
VOICE MAIL
[Peripheral]
Analog voice mail systems can be used with the MT-360 Seriessystem, connected to an Analog Terminal Adaptor (ATA) (P/N3009104). Each station has a private voice mail box number,
that is recognized by voice mail systems. 
CPID (calling party...

MT-360 SERIESDlGlTAL KEY SYSTEM
PROGRAMMING &
INSTALLATION MANUAL 

INTRQDUCTION
The MT-360 Series is designed to be easy to use, install, and program This SYSTEM INSTALLATION AND PROGRAMMING GUIDE is
written to provide detailed installation instructions, and to guide you through System Programming
INSTALLATION
This section describes the installation of the MT-366 Series The KSU cabinet includes power supply andall common control ooards. The basic
configuration has capacity for6 Central Office(C 0 ) lines, and 16 telephoneextensionsUsing anexpansion board,...