Lucent Technologies Remote Port Security Device Users Guide

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Customer Support Information 
Page xiii Lucent Technologies Fraud Intervention 
Lucent Technologies Fraud 
Intervention
 If you suspect you are being victimized by toll fraud and you need technical 
support or assistance, call the following:
nFor DEFINITY and Voice Mail products, call the Technical Service Center 
(TSC) at 1 800 242-2121.
nFor system 25, MERLIN, and PARTNER products, call the National Service 
Assistance Center...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Customer Support Information 
Page xiv Guarantee 
RPSD Lock with Keys
If the customer purchases RPSD Keys to access the systems protected by RPSD 
Locks, Lucent Technologies does not assume responsibility for the use of 
customer-purchased Keys. Accordingly, Lucent Technologies will pay for the 
unauthorized calls that occur as a result of access to such systems via the 
remote administration port through the RPSD provided the...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Customer Support Information 
Page xv Limited Warranty 
Whether or not the customer uses Keys, the customer agrees to promptly take all 
necessary steps to stop the toll fraud after becoming aware of it. Lucent 
Technologies’ liability under this RPSD guarantee ceases two hours after the 
customer becomes aware of the toll fraud incident. In no event shall Lucent 
Technologies’ responsibility exceed the amount of the customer’s...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Customer Support Information 
Page xvi FCC Notification and Repair Information 
FCC Notification and Repair 
Information
This equipment is registered with the FCC in accordance with Part 68 of its rules. 
In compliance with those rules, you are advised of the following:
nMeans of Connection. Connection of this equipment to the telephone 
network shall be through a standard network interface jack, USOC RJ11C. 
These USOCs must be...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Customer Support Information 
Page xvii Installation and Operational Procedures 
Installation and Operational 
Procedures
 This manual contains information about installation and operational procedures.
nRepair Instructions. If you experience trouble because your equipment is 
malfunctioning, the FCC requires that the equipment not be used and that 
it be disconnected from the network until the problem has been corrected....

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
Customer Support Information 
Page xviii Federal Communication Commission (FCC) Electromagnetic Interference Information 
Federal Communication Commission
(FCC) Electromagnetic Interference
Information
 This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when...

About This Book 
Page xix Intended Audiences 
Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
About This Book
Intended Audiences
This document is intended for the following audience:
nLucent Technologies technicians
nRPSD system administrators
nRPSD Key users
Lucent Technologies technicians are the personnel from Lucent Technologies 
who install the Remote Port Security Device (RPSD) Lock at the customer 
premises. It is assumed that Lucent Technologies technicians are...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
About This Book 
Page xx Terms and Conventions 
RPSD Keys purchased by the customer can be installed by Lucent Technologies 
technicians at the customer’s request or installed by the customers.
The troubleshooting material in this document may be used by the technician at 
the time of installation, but it is written primarily for the customer. Failure of any 
Lock or Key is always resolved by replacement of the failed device.
The...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
About This Book 
Page xxi Typographical Conventions 
Typographical Conventions
Throughout this manual RPSD system responses are shown in italic, sans serif 
type. For example:
Call authentication completed
Data that you enter is shown in bold sans serif type. For example:
Block user 
The   button at the end of the line tells you to press the Enter or Return key 
to complete the command.
NOTE:
In this document, a remote caller’s...

Remote Port Security Device
User’s Guide  555-024-402  Issue 1
October 1996
About This Book 
Page xxii Product Safety Labels 
Product Safety Labels
Throughout these documents, hazardous situations are indicated by an 
exclamation point inside a triangle and the word 
caution or warning.
!WARNING:
Warning indicates the presence of a hazard that could cause death or 
severe personal injury if the hazard is not avoided.
!CAUTION:
Caution indicates the presence of a hazard that could cause minor personal...