Home > Lucent Technologies > Communications System > Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Here you can view all the pages of manual Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 261

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-87 G2.2 Administration 
6
There exist 94 d ifferent enc od es (00-12, 14, 15, 17-96) whic h c orresp ond to 
numb ers 0 throug h 9, lower c ase letters, up p er c ase letters, and sp ec ial 
c harac ters. The Manag er II help  sc reen or the d oc ument 
D EFINITY 
Communic ations System Generic  2 Ad ministration Proc ed ures
 (555-104-506) 
may b e used...

Page 262

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-88 G2.2 Administration 
6
Procedure 108 Word 1: ISDN Trunk 
Group TTL Number (Digits)
This p roc ed ure is used  to assign the terminating  test line numb er (used  in test 3 
of maintenanc e p roc ed ure 648) that id entifies the p artic ular B-c hannel used  for 
ISDN-PRI testing  p urp oses. This test line numb er must b e assigned  for both 
p rivate...

Page 263

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-89 G2.2 Administration 
6
Field encodes and their descriptions are:
Dash (–), whenever a c arrier id entifier numb er is not ap p lic ab le.
Numb ers (1 throug h 511).
For most ISDN p ub lic  network c onnec tions it is exp ec ted  that the CBC Servic e 
Selection capability will be implemented.
With this c ap ab ility the ISDN B-c hannels must (on a p...

Page 264

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-90 G2.2 Administration 
6
Field 2
Assig ns whether the servic e/feature is b inary (1
) or p arameterized  (0
).
All c od eset NSFs are c lassified  as binary servic es. As an op tion, field s 5-11 may 
c ontain ad d itional defining  parameters (refer to Ta b l e  6 - 8
). However, even 
thoug h a servic e/feature may b e d efined  as p arameterized ,...

Page 265

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-91 G2.2 Administration 
6
Procedure 322 Word 1: WCR Outgoing ISDN
Feature Parameters
In this p roc ed ure you d efine an ISDN send ing ind ex and  then assign that ind ex to 
a p referenc e or a trunk g roup  in p roc ed ure 318 word  1. The following  list 
d esc rib es how to administer this p roc ed ure:
1. Disp lay the d esired ISDN send ing  ind ex...

Page 266

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-92 G2.2 Administration 
6
Procedure 318 Word 1: ISDN Sending 
Index and Digit Sending Index
This p roc ed ure is used  to p op ulate several ISDN IEs on outg oing  c alls to 
p referenc es or trunk g roup s as follows:
nThe d ig it send ing  ind ex in field  8 d etermines whic h IE the IXC is sent in. 
An IXC is first d efined  in p roc ed ure 321, word...

Page 267

G2 ISDN PRI Implementation in Administration 
Page A-1  
A
DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
A
AG2 ISDN PRI Implementation 
in Administration
This app end ix d esc ribes how ISDN PRI has b een imp lemented  in the 
ad ministration p roc edures in G2. It c overs the same sub jec ts found  in the ISDN 
PRI sections of Chap ter 5, ‘‘Layers 2 and  3’’
, but org anized  b y ad ministration 
p roc ed ure rather than b y...

Page 268

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
G2 ISDN PRI Implementation in Administration 
Page A-2  
A
nMode 1
— Opcode: 4 (assuming no codeset mapping)
Information transfer c ap ab ility: restric ted  d ig ital information
Coding standard: CCITT
Information transfer rate: 64K-b p s
Transfer mod e: c irc uit mod e
Layer and protoc ol identific ation: rate adaption as specified in I.461 
(layer 1)
User rate: 56K-b p s
Sync...

Page 269

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
G2 ISDN PRI Implementation in Administration 
Page A-3  
A
nUnknown Digital
— Opcode: 4 (assuming no codeset mapping)
Information transfer c ap ab ility: either unrestric ted  d ig ital information 
or restric ted  d ig ital information d ep end ing  on the translation 
sp ec ified  for the BCCOS in field  15 of p roc ed ure 014, word  1.
Coding standard: CCITT
Information transfer...

Page 270

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
G2 ISDN PRI Implementation in Administration 
Page A-4  
A
The same d esignator c an be assig ned  to a rang e of extensions via one c hang e 
exec ute op eration if no unassig ned  numb ers are within the entered  rang e (see 
the ‘‘Proc ed ure 354 Word  3’’
 sec tion in this app end ix for more information).
Procedure 010 Word 4
This word  is used to assig n ISDN routing  p...
Start reading Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Related Manuals for Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

All Lucent Technologies manuals