Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual
Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual
Here you can view all the pages of manual Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 151
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-35 ISDN PRI Layer 3 5 NOTE: If the servic e type of the trunk g roup is tie or tand em, c alls with any NSF on the trunk g roup will b e allowed to c omplete, regard less of whether the inc oming c all hand ling tab le is ad ministered or not. For examp le, if the servic e typ e is tandem and the inc oming c all hand ling tab le is b lank, any SDN,...
Page 152
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-36 ISDN PRI Layer 3 5 User-to-User Information Signaling In ad d ition to provid ing sig naling to estab lish, maintain, and terminate c alls, the layer 3 p rotoc ol also inc lud es signaling allowing end points to exc hang e information unrelated to c all c ontrol. For examp le, while c all c ontrol sig naling is taking p lac e, information c an...
Page 153
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-37 ISDN PRI Layer 3 5 Some IEs are d efined as c all c ontrol IEs b ut c an also b e used for the p urp ose of user-to-user information sig naling . The c alling p arty numb er, for examp le, whic h is d efined as a c all c ontrol IE, is often used b y the end user for ap p lic ations suc h as terminal displays. In order to d isting uish b etween...
Page 154
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-38 ISDN PRI Layer 3 5 6. The op c od e on the G2.2 to whic h the inc oming op c od e from field 4 is to be mapped is selected in field 6. 7. Step s 2 throug h 6 c an be rep eated up to 256 times for the inc oming c ase. 8.Outgoing is selec ted in field 2 and step s 3 throug h 7 are rep eated . For every inc oming map p ing there should b e an id...
Page 155
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-39 ISDN PRI Layer 3 5 G3V2 systems allow the TCM and lookahead interflow IEs to b e sent in either c od eset 6 or 7. In the inc oming d irec tion, these systems ac c ep t these IEs in either c od eset 6 or 7. You administer this in the trunk g roup form in the field Codeset to Send TCM/Lookahead . G3V2 systems also allow the d isp lay IE to b e sent...
Page 156
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-40 ISDN PRI Layer 3 5 Requirements for Sending Connected Number IE. In G2.2 systems, to send the c onnec ted numb er, the NPA-NXX d esig nator field in p roc ed ure 354, word 3 must b e ad ministered . This d esig nator must also b e entered in p roc ed ure 000 for the c onnec ted p artys extension. The numb er sent is then always of the form...
Page 157
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-41 ISDN PRI Layer 3 5 p urp ose is to d isp lay the c alling p arty name for d isp lay on the c onnec ted p artys terminal, thoug h anything in the IE will b e displayed . When sent in the CONNec t messag e, its purpose is to d isp lay the c onnec ted partys name on the c alling p artys terminal, thoug h anything in the IE will b e d isp layed . The ap...
Page 158
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-42 ISDN PRI Layer 3 5 Lookahead Interflow IE All DEFINITY systems p op ulate the lookahead interflow IE with the c ontents of the names d atab ase for the listed VDN of the orig inating system. Low Layer Compatibility IE The low layer c omp atib ility IE is used to tell an end p oint, trunk g roup , or routing p referenc e, the c harac teristic s of the...
Page 159
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-43 ISDN PRI Layer 3 5 nFor c alls from non-ISDN end p oints to ISDN PRI trunks, the BC IE and LLC IE, except for the information type codepoint, is populated automatically b ased on the typ e of end point. For examp le, if the endp oint is an MPDM set for mod e 1 op eration, the BC IE and LLC IE are p op ulated with mod e 1 c harac teristic s. Two exc ep...
Page 160
DEFINITY Communications System Generic 2.2 and Generic 3 V2 DS1/CEPT1/ISDN PRI Reference 555-025-107 Issue 1 July 1993 Layers 2 and 3 Page 5-44 ISDN PRI Layer 3 5 — A c all of BCC 2 will use a preferenc e with BCC 2 set to yes . If no suc h p referenc e exists, it will searc h for a p referenc e with BCC 0 set to yes . Failing this matc h, the c all is b loc ked with interc ep t. — A c all of BCC 1, 3, or 4 will b e b loc ked with interc ep t. — Calls from mode 2 end p oints must b e routed...