Home > Lucent Technologies > Communications System > Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Here you can view all the pages of manual Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 111

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-67 Synchronization 
4
Conclusions on Synchronization
Make no assump tions reg ard ing  sync hronization. Reverify items suc h as the 
availability of a synchronization source, the clock stratum, and compatibility of 
every T1/E1 sp an. The b est g uarantee is written c onfirmation that the loc al 
exc hange c arrier, AT&T Communic ations, or other vend or will...

Page 112

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-68 Synchronization 
4
ISDN-PRI Trunk Facilities
I SD N -PRI  t r u n k s  m a y  t e r m in a t e  o n  a  4 ESS t o l l o ff i c e ,  5 ESS d i g it a l C O ,  Sy st e m  8 5  
R2V4, DEFINITY c ommunic ations systems, or c omp atib le vend or’s switc h. 
Dep end ing  on other c onsid erations, any of these terminating  c onnec tions may 
b e selec ted  as...

Page 113

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-69 Synchronization 
4
Line+Trunk Mode DS1/DMI-BOS (ANN35 or
TN767 with TN555)
Reg ard ing  the use of a line+ trunk mod e DS1/DMI-BOS for sync hronization, the 
following  p oint should  be noted . Sinc e it would  b e exp ec ted  that a line+ trunk 
mod e DS1 would  terminate at a c lass-5 or hig her CO or at another switc h, the 
line+ trunk interfac e should...

Page 114

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-70 Synchronization 
4
nLine-only mod e DS1/DMI should  not b e used  as system c loc k referenc es 
unless it is known for c ertain that the inc oming  DS1/DMI sig nal is loc ked  to 
the AT&T referenc e freq uenc y. Normally, a DS1/DMI fac ility terminating  
d irec tly on the far-end  D4-c hannel b ank is not loc ked  to the AT&T 
referenc e freq uenc y.
G2.2...

Page 115

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-71 Synchronization 
4
G3V2 Synchronization Implementation
The following  list summarizes some of the imp lementation issues involved  with 
sync hronization:
nIn a network of DEFINITY systems c onnec ted  by DS1/CEPT1 fac ilities, one 
master timing  sourc e exists. This timing  sourc e, if on a G3V2 system, is 
one of the following :
— A DS1/CEPT1 c irc uit p...

Page 116

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Physical Layer 
Page 4-72 Synchronization 
4
Following  are rec ommend ations for c hoosing  a sync hronization sourc e in G3V2 
systems:
nIf you have a c hoic e, use a TN767 or TN464C b efore using  a TN722 as a 
timing source.
nIf at all possible, the p rimary and sec ond ary sourc es should  be loc ated  in 
the PPN.
nYou c annot loc ate a timing sourc e in a remote p ort network...

Page 117

Layers 2 and 3 
Page 5-1 Bit Oriented Signaling Layers 2 and 3 
5
DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
5
5Layers 2 and 3
This c hap ter d isc usses how various asp ec ts of layer 2 and  layer 3 p rotoc ols have 
b een d esig ned  into the DEFINITY systems. It d isc usses these sub jec ts as they 
relate to narrowb and  (64 kb p s) switc hing . 
For tec hnic al information on wid eb and  switc hing  in DEFINITY systems,...

Page 118

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Layers 2 and 3 
Page 5-2 Bit Oriented Signaling Layers 2 and 3 
5
mod el as layers 2 and  3 p rotoc ols. ISDN PRI sig naling , for examp le, b y d efinition 
uses the layers 2 and  3 c onc ep ts to d efine its c all c ontrol sig naling . Althoug h 
muc h less c omp lic ated , b it-oriented  sig naling  has its analog ous c all c ontrol 
struc ture (althoug h the c onc ep t of the...

Page 119

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Layers 2 and 3 
Page 5-3 Bit Oriented Signaling Layers 2 and 3 
5
b y the wink on a 4-wire E&M analog  trunk. When dig ital trunks first ap p eared , the 
d ec ision was mad e to d efine the sig naling  suc h that it emulated all the existing  
analog  c ases. Though d esc rib ing  the d etailed  p rotoc ols are beyond  the sc op e of 
this document, you can order the following...

Page 120

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
Layers 2 and 3 
Page 5-4 ISDN PRI Layer 2 
5
G3V2 Implementation
Imp lementing the bit-oriented  c all c ontrol p rotoc ol in the G3V2 systems is 
analog ous to that of G2.2. The p rotoc ol is imp lemented  in the trunk g roup  form. 
The g roup  typ e is analog ous to the trunk typ e of G2.2. Thus, you c an enter types 
suc h as tie, CO, and  DID. Like the G2.2, you c an ad minister...
Start reading Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

Related Manuals for Lucent Technologies Ds1/Cept1/Isdn Pri Reference Manual

All Lucent Technologies manuals