Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8, Issue 2.0 (02.0.034.2) Description Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8, Issue 2.0 (02.0.034.2) Description Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8, Issue 2.0 (02.0.034.2) Description Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 21

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
17  
79. A TN767 could not be hot-swapped with a cost-reduced TN2313 circuit 
pack when trunks were administered.  “Conflict” would appear on the “list 
circuit-pack” display. Now, A TN767 with trunks can be hot-swapped with a 
TN2313, and vice versa.  The correct TN code displays on the “list 
circuit-pack” screen.
80. If more than 65,535 ACD calls were...

Page 22

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
18  
91. If the name of the TN802B node was changed, the board did not reboot to 
take the new name.
92.The “did-view” button (hospitality only) allowed changing an automatically 
assigned DID number but it did not allow removal of the DID number.
93. Two-line display terminals did not display 27 characters names with 
extensions. Now, the display shows...

Page 23

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
19  
106. IP softphones in telecommuter or road warrior mode did not hear VOA 
announcements.  
107. If an R6 or R7 system had TN2238 ATM boards translated, upgrading to a 
later release resulted in possible translation corruption. Now, only the 
TN2238 translation records are lost.
108. A problem in the Australian ISDN protocol caused incoming ISDN calls...

Page 24

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
20  
121. If an endpoint and DEFINITY did not have matching codecs, a road warrior 
application call would hang for 15 seconds without a talk path, and then 
drop. Now, the call drops immediately. 
122. When all circular hunt group members were busy, the next hunt group call 
caused a system reset. 
123. It was previously possible to administer a TN802 as...

Page 25

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
21  
134.International customers had no ability to change the handling of the “star” 
and “pound” digits by the “collect” vector step, so that the use of these 
digits to indicate “clear all collected digits” and “end-of-dialing” could be 
reversed.  Some international mobile phone systems require this reversal, 
since their phone user normally enters a...

Page 26

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
22  
146. Under certain circumstances, incoming DS1 trunk calls provided priority 
ringing, instead of following the coverage path.
147. Sometimes the TN802B board would not come up in the correct state 
without several reboots. Now, the TN802B application is run after as little 
as 2 reboots of the board.
148. When an incoming DID call into switch A...

Page 27

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
23  
160. Calls routed over an ISDN trunk using Extended Trunk Access (ETA) was 
not considered when checking the numbering format field of the route 
patttern.  
161.The command “list usage button crss-alrt” showed only stations that had a 
crisis alert button administered. Now, the command shows all administered 
crisis alert buttons in the system, both...

Page 28

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
24  
175. If one of two or more TN802B boards in a system is disabled, it would 
remain out-of-service when re-enabled due to an incorrect alarm state.
176.The ‘list trace ewt’ command did not properly display data for columns 
Agents Working (AgtWk) and Agents Available (AgtAv).
177. When using the ‘list trace vdn’ command to trace a VDN/vector, which does...

Page 29

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
25  
189.The ”Port Not Fnd” message is returned when doing a traceroute 
command to a CLAN board and a port was specified, but a bad location 
was used.
190. Attempting to add duplicate IP routes on a C-LAN board is now blocked.
191. The “Route Type” field on the ‘add ip-route’ form was administrable. Now, 
that field is not administrable.  The route type is...

Page 30

DEFINITY Enterprise Communication Server Release 8, Issue 2.0 (02.0.034.2) 
Change Description  555-233-411  Issue 1
April 2000
Change Descriptions 
26  
205. PASTE data has been changed to include some missing Feature Access 
Codes (FACs) and button types for the Centre Vu (CV) Agent PC phone 
application.
206. Authorization codes of length 7 or less were not output in the Call Detail 
Recording & Reporting (CDR) repor t. 
207. The default settings in the system-parameters maintenance form, page 3,...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8, Issue 2.0 (02.0.034.2) Description Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8, Issue 2.0 (02.0.034.2) Description Manual

All Lucent Technologies manuals