Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Administrators Guide

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
917 System Parameters Call Coverage / Call Forwarding 
17
When the system redirects a call off-net at the final coverage point in a coverage 
path, the system can apply no further coverage treatment even if the call is 
unanswered. The only reason for activating answer detection on such a call is to 
maintain the simulated bridged appearance (SBA) on the principal’s phone that 
allows the principal to answer...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
918 System Parameters Country-Options 
17
Disable call classifier for CCRON over ISDN 
trunks
When a CCRON call routes offnet over ISDN end-to-end facilities, no call 
classifier is attached to the call. If, subsequently during the call, an ISDN 
PROGRESS or ALERT message is received that indicates that interworking has 
occurred, a call classifier is normally attached to the call and assumes precedences...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
919 System Parameters Country-Options 
17
Field descriptions for page 1
Screen 189. System Parameters Country-Options 11
Spain
12France 
13Germany
14Czech Republic, Slovakia
15Russia (CIS)
16Argentina
17Greece
18China
19Hong Kong
20Thailand
21Macedonia
22Poland
23Brazil
24Nordic
25South Africa
Code Country
change system-parameters country-options   Page 1 of 7...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
920 System Parameters Country-Options 
17
Companding Mode
Identifies the companding algorithm to be used by system hardware.
Base Tone Generation Set
The country code identifies the base tone generation set to be used. This field is 
meaningful only if the system tone detector is a TN780, vintage 4 or a TN2182.
A TN780 vintage 5 or greater or a TN2182 is required if Belgian Tones (Country 
code 8) are...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
921 System Parameters Country-Options 
17
Analog Ringing Cadence
The country code identifies the ringing cadence to be used by analog phones in the 
system.
Set Layer 1 timer T1 to 30 seconds
Analog Line Transmission
The country code identifies the transmission and signaling parameters.
Enhanced 64xx/84xx Display Character Set 
Howler After Busy
Plays howler tone when users leave their analog phone off-hook...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
922 System Parameters Country-Options 
17
Disconnect on No Answer by Call Type
Drops outgoing trunk calls (except DCS and AAR) that users leave unanswered 
too long.
Tone Detection Mode 
The country code specifies the type of tone detection used on a TN420B (or later) 
tone-detection circuit pack.
Dial Tone Validation Timer
Displays number of milliseconds that the dial tone validation routine will use to...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
923 System Parameters Country-Options 
17
Field descriptions for page 2
Screen 190. System Parameters Country-Options 
Digital Loss Plan
Provides the default values for digital loss plan and n-party conference loss.
Customize
Appears when the Digital Loss Plan Modification field is enabled on the 
System-Parameters Customer-Options screen.
FROM / TO
Identifies the variable digital loss values.
Valid entries...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
924 System Parameters Country-Options 
17
Field descriptions for page 3
Screen 191. System Parameters Country-Options 
Digital Tone Plan
Provides the default values for tone loss for the selected country.
Customize
Appears when, on the System-Parameters Customer-Options screen, the Digital 
Loss Plan Modification field is 
y. Valid entries Usage
1 
- 25Refer to the Country code table at the beginning of this...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
925 System Parameters Country-Options 
17
End-to-End total loss (dB) in a n-party 
conference
Provides total loss for a conference call with the designated number of parties.
FROM / TO
Identifies the variable digital tone values.
Field descriptions for pages 4–7
Screen 192. System Parameters Country-OptionsValid entries Usage
0 
- 99The higher the number listed for a call with a fixed display 
number of...

DEFINITY ECS Release 8.2
Administrator’s Guide  555-233-506  Issue 1
April 2000
Screen reference 
926 System Parameters Country-Options 
17
Tone Name
Each entry uses one of the keywords below to indicate which of the individually 
administrable tones this screen modifies. This field (with its associated Tone 
(Frequency/Level), Duration, and Step fields) is meaningful only if the system 
tone detector is a TN780, vintage 4 or greater, or a TN2182.
Cadence Step
Valid entries Usage
blank   If this field is...